Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Construction in Lancaster, CA | Barrett & Sons Construction Lancaster
We provide independent CGI service across Lancaster, CA, and the one thing that sets our work apart here is knowing what the Valley does to these cabinets and countertops. CGI products hold up well when they’re installed against real local conditions. Lancaster’s heat, wind and shifting clay ground are the reason a lot of them don’t. We install, reface and repair CGI cabinetry and countertops for tract homes across Lancaster, with scope and pricing in writing before anything gets ordered. Call (888) 427-1810 for a free estimate.
Why Lancaster Residents Choose Us for CGI Service
Barrett & Sons Construction has worked on CGI-built homes and CGI-supplied kitchens across Lancaster since 1998, and we’re owner-operated. Tom Barrett and his sons are on-site most days, which matters when a cabinet run needs to sit true over a counter for the next twenty summers.
We read CGI’s cabinet specs, finish codes and installation tolerances directly, not through a dealer channel. When you need a hinge, glide, shelf clip or finish kit that actually matches your cabinet’s bore pattern and load rating, that familiarity saves you a wrong order and a second trip. CGI products have known failure modes in the Antelope Valley, and we’ve watched them play out in Lancaster tract homes up and down the west side for decades.
Our technicians have up to 28 years of experience. Every job gets a written scope, permits pulled where Lancaster requires them, and the 90-Day Done Right Promise on the contract. If something isn’t right, one call brings Tom back. Use our CGI service page for the full picture of what we handle.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common CGI Construction Problems We Solve in Lancaster
- Thermofoil and laminate door skins that peel and delaminate. Las summer heat past 100°F plus the Valley’s low humidity dries out the adhesive at the door edges long before the box fails. You’ll usually spot it at the top corners first, then along the bottom edge near the dishwasher where heat is worst.
- Toe-kick and base swelling on slab-on-grade tract homes. Lancaster’s expansive clay soils wick moisture up through the slab during seasonal moisture swings, and CGI particleboard-core bases take it first. A base cabinet that swells near the toe-kick is telling you something about the slab, not just the cabinet.
- Hinge and drawer-glide fatigue in west-side tract kitchens. CGI soft-close hardware works harder when the cabinet box has racked slightly from slab movement telegraphing through the floor. You feel it as doors that won’t quite close or drawers that scrape.
- Sun-facing vanity and linen finishes going chalky or yellow. Bathrooms with high windows catch direct Antelope Valley UV, which chalks and yellows CGI finishes faster than shaded rooms. Caulk joints at the backsplash open as the stucco wall moves with the seasons.
- Counter runs that lose level a few years out. A CGI kitchen that looked perfect at install can drift out of plumb by the counter line once the clay under the slab moves. That’s a local soil problem showing up as a cabinet problem.
CGI Service in Lancaster: What Local Conditions Mean for Your Equipment
Here’s the fact that shapes every CGI kitchen job in Lancaster: this city sits on high-desert Antelope Valley ground where expansive clay swells and shrinks through the year’s moisture swings, so a cabinet run that reads dead level on day one can be out of plumb by the time it reaches the counter a few years later. Coastal LA crews miss it because their soil and humidity don’t behave this way. Across the 1980s-2000s slab-on-grade stucco tract homes, we check the slab and subfloor for soil movement before trusting a single level line. In a typical Lancaster tract kitchen, a homeowner notices CGI thermofoil doors peeling at the corners and a base cabinet swelling near the toe-kick, usually after a wet winter following a dry summer. The usual cause is UV and heat degrading the door skin while slab moisture climbs through the box on that clay. A qualified local pro checks movement and moisture before ordering new doors, replaces the failed boxes and skins with CGI-compatible components, and re-levels the run so it stays true under the counter.
CGI Models & Products We Service in Lancaster
We work with the CGI lines that actually show up in Lancaster homes: Ready-to-Assemble all-plywood cabinets in the shaker and slab doors common in tract kitchen refreshes, semi-custom framed and frameless cabinetry from big-box and dealer programs for full remodels, CGI quartz and granite countertop packages paired with their cabinet lines, and the vanity and bath cabinetry lines used in hall-bath and master-bath updates.
On parts, we go OEM whenever the box is sound. CGI hinges, glides, shelf clips and finish kits match bore patterns and load ratings that aftermarket hardware rarely gets right. We don’t claim to keep CGI parts in local stock; we source per job, so lead time is quoted in writing with the estimate. When a door or base has failed, we replace that component, not the whole run. Full replacement only makes sense when several boxes have taken on moisture or the layout itself is the problem.
See the difference
Before
After
Before
After
Before
AfterCGI Service Pricing in Lancaster
| Service | Price Range |
|---|---|
| Full Kitchen Remodel | $14,000 – $45,000 |
| Small Kitchen Remodel | $9,000 – $20,000 |
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Backsplash Installation | $800 – $2,500 |
What moves your number: whether the boxes are sound or need replacing, how much slab or subfloor correction the run needs, door style and finish on CGI replacements, and countertop material. A free estimate includes measuring the run, checking for moisture and movement, and a written line-item scope with allowances spelled out. An allowance that isn’t on paper is a surprise waiting for a date. Call (888) 427-1810 to schedule yours.
Serving Lancaster, CA – Our Local Coverage Area
We serve Lancaster and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – CGI Construction in Lancaster
Yes, in most cases the doors and drawer fronts can be refaced while the boxes stay if the boxes are dry and square. Peeling thermofoil is a door-skin failure, not a box failure. We check the bases for moisture first, because refacing over a swollen base just hides the problem.
Because Lancaster’s expansive clay soils move with seasonal moisture, and that movement telegraphs through the slab into the cabinet run. The install was likely fine; the ground underneath changed. A proper fix corrects the subfloor or run before re-shimming. Call (888) 427-1810 for an estimate.
Quartz and granite both hold up well to Lancaster’s UV and heat; the bigger risk is the cabinet base moving under them. We set counters over a true, dry run, which is what keeps seams tight through the summer. Call (888) 427-1810 – estimates are free.
Cabinet installation in Lancaster typically runs $4,000 – $13,000, and a small kitchen remodel runs $9,000 – $20,000. Slab correction and door style drive the range. Call (888) 427-1810 for an exact quote.
Like-for-like cabinet and countertop swaps often don’t require a permit, but layout changes, new plumbing or electrical do. We pull permits and get inspections signed on every eligible job, and we’ll tell you in writing which applies to yours. Call (888) 427-1810 to check.
Service Areas Near Lancaster
We serve Lancaster and the surrounding Antelope Valley and Santa Clarita Valley communities, including Palmdale, Quartz Hill, Santa Clarita, Castaic and Stevenson Ranch. See our Lancaster service area page for coverage details.
Book Your CGI Service in Lancaster Today
Call (888) 427-1810 for a free estimate on CGI cabinet installation, refacing or countertops in Lancaster. A live person answers, day or night. We’ll quote in writing, pull the permits and back the work with the 90-Day Done Right Promise.
Written by the team at Barrett & Sons Construction Lancaster.