Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Lancaster Homeowners Choose CGI Construction
Barrett & Sons Construction Lancaster provides independent CGI cabinet and storage service across Lancaster, CA. Our crew members work with CGI’s cabinet systems and the specific hardware that fails on them, so we diagnose the peeling door, the sagging hinge, or the stuck drawer by what is actually broken, not by what a catalog says. We’re an independent local provider, not affiliated with or authorized by CGI, and every repair or installation is quoted on the hardware the job needs. Call (888) 427-1810 for a free estimate.
Why Trust Barrett & Sons Construction Lancaster for Your CGI Construction?
Our technicians have up to 28 years of experience, and a large share of that time has been spent inside CGI kitchens, closets, and cabinets that were installed years ago and are now asking for attention. We know which hinge on a CGI Euro-style full-overlay door is likely to loosen first, and we know why. We know that the drawer glide on a CGI Ready-to-Assemble (RTA) box wears differently than on a factory-built American-style cabinet, and we know what a thermofoil skin does after a decade of splash exposure near a sink.
OEM-compatible parts matter on CGI work. The wrong hinge plate will not line up with the existing cabinet-side drilling, and a mismatched glide will make a straight drawer pull crooked. When we source replacement parts, we match the original specification whenever it’s available and tell you plainly when an OEM part is discontinued or backordered.
Warranty-safe service is a commitment we take seriously. We don’t drill into a cabinet box or cut a countertop in a way that gives a manufacturer a reason to deny a claim. If your CGI cabinets are still inside a coverage window, we say so before we touch them. This is Barrett & Sons Construction Lancaster’s approach across every trade – permits pulled, inspections signed, and every price change on paper before work starts. We’re locally based, Tom Barrett’s name and license are published so you can verify them, and the crew members on your job are background-checked and carry the Barrett & Sons name.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common CGI Construction Problems We Fix in Lancaster
CGI cabinet systems fail in predictable places. Here are the five issues we see most often in Lancaster homes, and why each one happens.
- Thermofoil and melamine peeling at cabinet edges and drawer fronts. This is the most common CGI call we get. Household moisture and cooking heat cycle through a kitchen every day, and the laminate skin on a thermofoil door lifts where it gets the most splash – usually the bottom edge near the sink and the fronts near the cooktop. In Lancaster’s dry air, the skin doesn’t stay pliable, so once it starts lifting it peels faster than it would in a humid climate.
- Euro-style concealed hinges loosening or stripping at the cabinet side panel. CGI’s Euro-style full-overlay cabinets depend on a hinge that screws into a thin side panel. After years of daily opening and closing, the screws work loose or the holes strip, and the door starts to sag and rub the cabinet next to it. That’s not a door problem. It’s a hinge-and-panel problem.
- Particleboard and MDF boxes swelling or crumbling at the toe kick and under-sink base. Slab moisture is real in Lancaster, and a slow leak under a sink – a dripping valve, a loose p-trap – will soak into the particleboard floor of the cabinet over months. When it swells, the box loses strength and the door hinges have nothing solid to hold.
- Drawer glide tracks wearing out or misaligning on RTA-style boxes. A drawer that no longer glides smoothly, or that droops when you pull it out, has a worn or misaligned track. On CGI’s RTA lines the glide takes more load than on a heavier factory box, so it wears sooner. A stuck drawer is usually a glide problem, not a drawer problem.
- Laminate countertops delaminating at the sink cut-out and edges. CGI’s laminate countertop programs are tough, but the substrate swells at the sink opening when a seal fails. The laminate then lifts at the seam, and water gets under it. Left alone, the whole counter needs to come out.
What all five of these have in common is that the problem is small and localized before it becomes expensive. The trick is knowing when a repair is enough and when it’s just buying time.
CGI Parts & Our Repair-vs-Replace Approach
For CGI cabinets, OEM hinges and drawer glides are the reliable match when the cabinet box is still sound. If an original part has been discontinued or is backordered, quality aftermarket hardware is a reasonable upgrade – as long as it’s sized correctly and the drilling lines up. We source the part for the job instead of guessing what’s close, and we tell you when a substitution is happening and why.
The repair-or-replace call depends on the box, not the door. If thermofoil is peeling on one or two fronts and the box is solid, replacing those doors is the honest fix. If the thermofoil is peeling across most of the kitchen or the cabinet box has swollen and gone soft, refacing or replacement is usually more honest than patching the same doors twice. We’ll tell you which one you’re looking at before any work starts, and the price arrives in writing. Call (888) 427-1810 and we’ll take a look.
Our CGI Service Process – Step by Step
A CGI cabinet call starts with a diagnosis, and the diagnosis is most of the work.
- 1
Diagnosis. We open every door involved, check the hinge plates and side panels, check the drawer glides, test the cabinet floor and toe kick for swelling, and trace any moisture at the sink and cooktop. On a countertop call we check the sink seal and substrate. We find the actual cause before we quote a fix.
- 2
Repair or install. For hinges and glides we replace the part and re-align the door or drawer to the existing cabinet. For a cabinet installation or refacing job we match the new doors to the existing box and the countertop to the layout. Permits are pulled on any eligible job, and any change in scope becomes a written change order before the work moves.
- 3
Test. Every door opens and closes clean without rubbing, every drawer glides straight, and the countertop and backsplash seams are sealed. You walk through it with us, and we don’t call it finished until you do.
- 4
Warranty. Every completed job is backed by our written 90-Day Done Right Promise. If something isn’t right, one call brings Tom back to make it right.
See the difference
Before
After
Before
After
Before
AfterCGI Products We Service & Install in Lancaster
We work on the CGI cabinet and storage products that show up in Lancaster kitchens and closets: CGI Euro-style full-overlay cabinets, CGI Ready-to-Assemble (RTA) cabinet lines, CGI melamine and thermofoil closet systems, and CGI laminate countertop programs. That covers the door-front replacements, hinge and glide repairs, full cabinet installation and refacing, and the kitchen layout work that goes with them. When a CGI job also needs a countertop or backsplash update – or a new island – we handle those as part of the same scope, with quartz and granite fabrication quoted in writing.
We Also Service These Brands
Barrett & Sons Construction Lancaster is a multi-brand outfit, not a single-brand shop. We install and service KraftMaid and Cambria in kitchens, Silestone quartz counters, and Kohler fixtures, alongside the roofing, windows, fencing, and additions work our neighbors call us for. A CGI kitchen doesn’t have to stay a CGI kitchen, and you won’t get steered toward one brand because it’s the only one we know.
FAQs – CGI Construction Service in Lancaster
No. We’re an independent local provider, not affiliated with or authorized by CGI. We work on CGI cabinets and storage systems, but any warranty question that depends on manufacturer authorization needs to go to CGI directly. Call (888) 427-1810 and we’ll walk you through what we can and can’t do.
We use OEM-compatible parts whenever they’re available, and we tell you when an OEM hinge or glide has been discontinued or backordered and a quality aftermarket part is going on instead. We match the original specification first so the door or drawer lines up with the existing cabinet.
A hinge or glide repair is usually a single visit. A door-front replacement or a refacing job runs longer, and a full cabinet installation is a multi-day project. We give you the timeline in writing before we start, and if a change comes up, it arrives as a written change order first.
We cover CGI Euro-style full-overlay cabinets, CGI Ready-to-Assemble (RTA) lines, CGI melamine and thermofoil closet systems, and CGI laminate countertop programs. If you’re not sure which line you have, our technician can identify it from the hinge or the cabinet box when we’re on site.
Repairing a hinge or replacing a drawer glide on a cabinet you own doesn’t void a manufacturer warranty by itself, but any coverage that depends on CGI authorization needs to go through CGI. We’re independent, so we tell you before we start when a repair could affect a claim. Call (888) 427-1810 with your warranty paperwork and we’ll sort out where you stand.
It depends on the scope, but here are the ranges Lancaster homeowners should budget for. Every quote we write is a line-item price, and any change comes in writing first.
| CGI Service in Lancaster | Typical Price Range |
|---|---|
| Cabinet Installation | $4000 – $13000 |
| Countertop Installation | $2000 – $6500 |
| Backsplash Installation | $800 – $2500 |
| Kitchen Island Installation | $3000 – $10000 |
| Small Kitchen Remodel | $9000 – $20000 |
Call (888) 427-1810 for an exact quote – estimates are free, and the second opinion on another contractor’s written estimate is free too.
Often, yes. If the cabinet box is still structurally sound, we can replace the door fronts that have peeled and leave the sound boxes in place. If the thermofoil is lifting across most of the kitchen, or the box has swollen soft, replacement is the more honest answer and we’ll say so.
Refacing keeps your existing CGI cabinet boxes and puts new doors, drawer fronts, and veneer on the visible faces; replacing takes out the boxes and starts over. Refacing costs less and keeps a sound box out of the landfill, but it only works when the boxes are solid. We check the boxes first and tell you which one you’re looking at.
Dry heat alone doesn’t swell a cabinet box. The swelling comes from moisture – a slow leak under a sink, a swinging wet mop at the toe kick, or a slab that stays damp. Lancaster’s low humidity actually helps the wood stay stable, but that same dry air makes a thermofoil skin less forgiving once it starts to lift.
Yes, and it’s a common way to get a fresh kitchen without a full remodel. If the boxes and hinges are sound, a new countertop and backsplash – with a new island if the layout has room – can change the whole room. We check the boxes and the sink substrate first so the new counter goes onto something solid.
A small kitchen remodel in Lancaster using your existing CGI cabinets typically runs $9000 – $20000, depending on countertop, backsplash, and whether the cabinet fronts get replaced. Call (888) 427-1810 and we’ll put the line-item quote together.
Book Your CGI Service in Lancaster, CA
If your CGI cabinets are peeling, your hinges are sagging, or your drawers don’t glide straight, call Barrett & Sons Construction Lancaster at (888) 427-1810. We’ll open the doors, find the actual cause, and quote the repair in writing before any work starts. Every eligible job gets permits pulled and a written change order on any scope change, and every completed job is backed by our 90-Day Done Right Promise. Call (888) 427-1810 to schedule your free estimate.
Written by the team at Barrett & Sons Construction.