Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterWhat Cabinet Refacing Really Costs in Lancaster, CA
Cabinet refacing in Lancaster runs $3,500 to $11,000 for most tract-home kitchens, with the wider remodel range landing between $14,000 and $45,000 once box repair, new countertops and lighting are folded in. The number that matters most, though, isn’t on most estimates: whether your 1980s-2000s cabinet boxes are worth saving after decades of Antelope Valley heat cycling. Call (888) 427-1810 and we’ll walk you through it before anyone quotes a dollar figure.
Here’s the part the phone-quote crowd skips. Lancaster sits above 2,300 feet in the high desert, and the boxes in these west- and east-side tract homes were assembled with glues that were never designed for regular 100°F+ summers. Those joints let go quietly. You don’t see it until the old doors come off.
Why Lancaster Quotes Start With a Box Inspection, Not a Price
A refacing job is only as good as what’s underneath it. Before we quote a single door front in Lancaster, we open a cabinet, check the corners, press on the sides, and look for the soft spots and hairline separations that come from years of dry heat and strong, persistent wind working on a house. That inspection is the honest starting point, and it’s free.
Most estimates you’ll collect online treat refacing as a flat package: so many doors, so much veneer, done. That works for a newer kitchen. It does not work for a 1992 stucco tract home where the particleboard sides have been baking since the first Bush administration.
What we find in Lancaster homes built between roughly 1985 and 2005 is predictable. The glue at the box joints separates. The particleboard delaminates along the bottom edges, especially near the sink and dishwasher where moisture and heat take turns. When that happens, refacing would just be putting a nice new face on a failing frame, and we won’t do it.
The Three Cost Buckets That Actually Drive a Lancaster Refacing Quote
A real refacing number breaks into three pieces, and every one of them moves with the condition of your boxes and the size of your kitchen.
- Door and drawer fronts: the largest bucket. Material, profile and finish swing this the most, and the number of fronts you need depends entirely on your kitchen’s layout.
- Veneer sheeting on exposed box sides: the part homeowners forget. Every cabinet end that shows gets covered, and how much box side faces the room changes the labor and material.
- Hardware: hinges, pulls, drawer slides. Small line item, big effect on how the finished kitchen feels day to day.
Labor runs differently here than the numbers you’ll find on coastal LA quote sites. Those quotes assume dense, tight lots and city drive times. Lancaster jobs sit on larger flat lots with easier access, and our crews know this valley. That shows up in the schedule and, often, in the final bill. If refacing turns out not to be the right call, we’ll tell you, and our Kitchen Remodeling page lays out the full-remodel path instead.
Sample Lancaster Refacing Cost Table
| Item | Price Range |
|---|---|
| Refacing only (doors, drawer fronts, veneer, hardware) | $3,500 - $11,000 |
| Cabinet installation (new boxes) | $4,000 - $13,000 |
| Countertop installation | $2,000 - $6,500 |
| Backsplash installation | $800 - $2,500 |
| Kitchen island installation | $3,000 - $10,000 |
| Full kitchen remodel (refacing to full replacement) | $14,000 - $45,000 |
| Small kitchen remodel | $9,000 - $20,000 |
These are the same ranges we quote across Lancaster, whether you’re off Avenue J or out toward Quartz Hill. You’ll get an exact figure after we’ve seen the boxes. The Kitchen Remodeling in Lancaster page covers what a fuller scope looks like if you’re weighing more than fronts.
Refacing vs. KraftMaid Box Replacement vs. the Hybrid in Between
Sometimes the honest answer is that the boxes aren’t worth saving, and that’s where a lot of quotes get slippery. We install KraftMaid cabinetry and pair it with Cambria counters, and we’ll show you the difference between three real paths:
- Straight refacing: sound boxes, new fronts, veneer and hardware. Lowest cost, fastest turnaround.
- Hybrid: replace the failed boxes, reface the sound ones. You keep the budget in check without pretending a delaminated carcass is fine.
- Full replacement: all new KraftMaid boxes and fronts. Best when the layout itself is the problem, not just the finish.
Most national chains won’t offer the hybrid, because their business model is full replacement. We’ll lay out all three with the numbers side by side, and every scope, allowance and price change arrives as a written change order before work starts. An allowance that isn’t on paper is a surprise waiting for a date, and we don’t do those.
Do You Need a Permit to Reface Cabinets in Lancaster?
Refacing alone rarely triggers a permit in Lancaster. But the moment the scope grows to include electrical, like adding under-cabinet lighting, or moving plumbing, a permit is required, and that’s the line a lot of contractors quietly skip. Skipping it leaves you exposed at resale, and the permit inspector works for you, not for us, which is why we like him.
Every eligible job we take on includes permits pulled and inspections signed. That’s the difference between a job that closes clean and one that comes back to bite you at the title desk a few years down the road.
What the 90-Day Done Right Promise Means for Refacing
Adhesion failures are the most common callback in this trade, and Lancaster’s dry desert air makes them more likely than in a coastal kitchen. A veneer edge can lift at month two, and when it does, that call goes to the person who did the work, not a voicemail box in another state.
That’s what the 90-Day Done Right Promise is: it’s written on the contract, not buried in fine print. If it’s not done right, we come back and make it right, one call. Our crews have up to 28 years of experience installing these fronts, and that’s how we keep adhesion failures rare in the first place. If you’re comparing bids and want a second set of eyes, our home page and the kitchen guides cover more, and the Barrett & Sons Construction Lancaster team will give you a free second opinion on any written estimate.
FAQs About Refacing Cost in Lancaster
Refacing kitchen cabinets in Lancaster typically costs $3,500 to $11,000, and full kitchen remodels that include refacing range from $14,000 to $45,000. The final number depends on the condition of your boxes and how many fronts and exposed sides you have. Call (888) 427-1810 for an exact quote, and estimates are free.
Refacing is cheaper up front, often by thousands, but only if your boxes are sound. In older Lancaster tract homes where the particleboard has delaminated, replacement or a hybrid job can cost less over time than refacing a failing box. Call (888) 427-1810 and we’ll tell you honestly which path fits your kitchen.
Yes. We inspect the box condition before we quote a number, because that inspection decides whether refacing even makes sense. It’s free, and a live person answers the phone around the clock. Call (888) 427-1810 to schedule.
We pull a permit whenever the scope includes electrical or plumbing, such as under-cabinet lighting or moving a sink. Refacing alone usually doesn’t need one, but any licensed job that grows into those trades gets permitted and inspected. Call (888) 427-1810 to talk through your scope.
Get a Straight Refacing Number for Your Lancaster Kitchen
Before you sign anything, get a quote that starts with the boxes, not a phone number. We’ll inspect, lay out refacing versus hybrid versus replacement, and put every allowance in writing. Call (888) 427-1810 for a free estimate on your Lancaster kitchen. No trip charge inside the county, and a 10% senior and veteran discount applies for good.
Written by the team at Barrett & Sons Construction Lancaster, serving Lancaster, CA.
What Our Customers Say
"Addition over the garage matched the original roofline and brickwork so closely that visitors do not realise it was added. He tracked down the closest brick he could find rather than settling."
- Gideon Stroud"He pulled every permit and had every inspection signed off. The last contractor we used told us permits were optional and I have been paying for that ever since."
- Redmond Cavanaugh"The bathroom was finished on the day he said at the start, which nobody had led me to believe was possible."
- Loretta Vanterpool