A Barrett company - serving Lancaster, CA

Wellborn Driveway & Pavers in Lancaster, CA

Driveway & paversDriveway & pavers
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Wellborn Driveway & Pavers: The Lancaster Owner’s Guide

The short answer: If your Wellborn driveway or paver system is failing, we install Wellborn-compatible driveway and paver work right here in Lancaster, CA. Whether that’s fixing a settled edge or re-laying a whole failed run, paver driveway installation in Lancaster runs $7,000 – $18,000 installed, with driveway sealing to protect the joints at $250 – $700. We’re an independent contractor, not affiliated with Wellborn, so we’re free to tell you straight whether you need genuine Wellborn components or a quality equivalent that fits the same job.

Call (888) 427-1810

Most owners don’t wake up knowing they have a “part” problem. They notice the symptom first. A paver at the driveway apron tips when the car rolls over it. A joint sand washes out every time it rains and the weeds move in. One corner of the driveway settles below the grade and holds a puddle for a week. That’s usually when the call comes in. It’s the pattern of failure, not a single broken piece, that tells us where the base failed and what it’ll take to set it right.

Key Takeaways

  • Wellborn-compatible paver and driveway work in Lancaster: $7,000 – $18,000 installed for a full paver driveway.
  • Most paver “failures” trace back to base, drainage, or edge restraint, not the surface pavers themselves.
  • Sealing runs $250 – $700 and stretches the service life of a sound driveway.
  • We’re independent from Wellborn and give you an honest OEM-vs-equivalent call in writing.
  • Every eligible job is permitted and inspected, and every price change is a written change order.

Which Wellborn Models This Applies To

Wellborn’s planting-stone lines and hardscape pieces show up across a wide range of yard products, and the compatibility question most Lancaster homeowners run into is the joint-and-thickness mismatch, not the brand name. When you’re replacing or extending a run, the new paver has to match the existing piece on thickness, joint width, and edge profile, or the whole field sits uneven and the restraint won’t seat. Print pavers, plank-style pavers, and large-format slabs each have different bedding requirements, and a slab that’s a quarter-inch thicker than its neighbor will telegraph through the surface as a trip hazard within a season.

Here’s how to identify what you actually have. Check under the lip of the driveway apron or pull a loose paver at the edge and measure the thickness and footprint. Look at the back of a break for a stamped manufacturer mark. Note the color and texture so a genuine Wellborn replacement matches the run, because dye lots drift over the years even within a single line.

The genuine-vs-equivalent decision is the one worth slowing down for. Genuine Wellborn pieces keep the field consistent and the color matched. A quality equivalent can be the smarter, cheaper move when a full re-lay is happening anyway and color-matching the old run stops mattering. We put the recommendation for your specific driveway in writing before we order, so there’s no guessing at pickup day.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Wellborn Driveway & Pavers Is Failing

The symptoms below are how a failing install announces itself. Each one points to a cause, and the cause is what we actually fix.

  • Pavers rocking or tipping underfoot. The bedding sand under that paver has washed out or the base below it settled. Cars rolling over an unbedded paver start breaking edges.
  • Joint sand washing out with every rain. That’s a drainage or restraint problem, not a paver problem. The water is escaping through the joints instead of shedding off the grade.
  • Uneven settling along the driveway apron. The transition at the street takes the most load and absorbs the most runoff. Apache and other Lancaster neighborhoods on expansive desert soil see this early when the base wasn’t built to depth.
  • Edge pavers sliding outward. The edge restraint has failed or was never pinned. Once the edge gives, the field loosens from the outside in.
  • Weeds and moss creeping through joints. A sign the joint sand is gone and water is pooling. Moss in a Lancaster driveway usually means shade plus trapped moisture, a fixable drainage issue.

Every one of these comes back to base, drainage, or restraint. New pavers laid over a bad base fail the same way in a season. That’s why we look under the grade before we quote the surface.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Here’s what the work runs in Lancaster, so you can price it before you commit. These ranges cover labor, materials, base prep, and haul-off.

Service Installed Range
Paver driveway installation $7,000 – $18,000
Concrete driveway installation $4,500 – $12,000
Driveway replacement $5,000 – $14,000
Driveway sealing $250 – $700
Paver patio installation $3,500 – $11,000

What drives the range: driveway square footage, how deep we excavate to reach solid base, whether the old surface needs full removal, drainage corrections, and whether you go genuine Wellborn or equivalent. The quote is line-itemized. Parts and labor are shown separately so you can see what the material costs. If the base turns out worse than inspection showed, you get a written change order before anyone moves on it. No allowance surprises at the end. The finished work carries our written 90-Day Done Right Promise.

DIY or Call Us?

There’s real value in knowing your own driveway, and a few things you can safely check. Walk the run and mark the pavers that rock. Rake back a little joint sand to see how much has washed out. Look at the edge restraint for pavers pushing outward. Lift one loose paver and measure thickness and footprint so you know the size to match. That’s useful information.

Where DIY goes wrong: re-bedding and re-setting pavers looks simple and goes sideways fast once the base is soft underneath. Getting base compaction and depth right for Lancaster’s soil is the whole game, and a hand-tamped paver over loose dirt settles again within a season. Edge restraint has to be pinned right, and the grading that sheds water has to be worked before the surface goes down. Skip that and you’ve paid for the same failure twice. If you want it set right and backed, call us at (888) 427-1810 for a free estimate.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 427-1810
Local Service Coverage

Request a Free Estimate in Lancaster

Tell us what you need - Barrett & Sons Construction Lancaster responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch