Bathroom remodeling
Kitchen remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Wellborn Bathroom Remodeling: The Lancaster Owner’s Guide
We install Wellborn bathroom cabinetry and vanity systems throughout Lancaster, with a full bathroom remodel typically running $9,000 – $28,000 installed, and a small bathroom remodel between $5,000 and $12,000 depending on the cabinet run, counter square footage, and fixture load. Schedules in Lancaster usually fill two to four weeks out for a full remodel, and a vanity-only swap is often a one-day job once the cabinet arrives.
Bathroom remodels don’t fail all at once. In Lancaster homes, owners typically spot trouble in the vanity first: a door that stops closing flush, a drawer that rides rough on its slide, or a soft spot in the cabinet bottom near the sink. What looks like a finish problem is often moisture getting past the caulk line or a cabinet grade that wasn’t built for a shower-adjacent wall.
Key Takeaways
- Wellborn bathroom cabinets are installed, not repaired in place when a structural part fails.
- Lancaster’s dry air and hot summers stress veneers and caulk joints differently than coastal climates.
- Full bathroom remodels in Lancaster run $9,000 – $28,000; small remodels $5,000 – $12,000.
- Every scope change is a written change order before work happens.
Which Wellborn Models This Applies To
Wellborn makes a long list of door styles across several construction tiers, and the tier matters more than the door name when you’re deciding whether a vanity is worth saving. A painted MDF door in a secondary bath behaves completely differently from a solid wood raised-panel door in a primary bath, even though the two might share a finish color. If you’re rebuilding a vanity, the model line and door construction determine whether new doors and drawer fronts will actually fit the existing box.
Locate the cabinet label first. Wellborn places a printed label inside the door, on the back panel, or on the underside of a drawer box; the label shows the series, door style, and finish code. Photograph it before anything is removed. Measure the cabinet opening for the sink, the depth of the cabinet, and the height of the drawer face. Those three measurements are the ones that get a bathroom cabinet matched correctly.
The OEM-versus-aftermarket question is where Lancaster homeowners get stuck. Wellborn-branded replacements make sense when the existing cabinetry is structurally sound and you’re matching a finish across a primary bath. Quality aftermarket fronts, hinges, and slides are a reasonable option for a secondary bath or powder room where the cabinet box is solid but you want a face-lift without waiting on a custom order. We’re independent of Wellborn, so we’ll tell you which route actually serves the room.
One compatibility gotcha we see: Wellborn vanity bases come in standard widths, and the sink opening is cut for a specific bowl dimension. Swapping in a cabinet built for a different bowl means the counter has to be re-cut, which adds countertop cost and a second trip.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Wellborn Bathroom Remodeling Is Failing
Bathroom cabinetry rarely fails without warning. These are the symptoms we see most in Lancaster homes:
- Doors that no longer sit flush. The hinge plate has loosened from the cabinet stile, a common result of humidity swings pulling screws out of MDF over time.
- Drawers that ride rough or catch halfway. The drawer slide has either lost its lubricant or bowed, which happens more in bathrooms where the drawer holds heavy product bottles.
- Soft or discolored cabinet bottom near the sink. Water getting past the caulk line at the counter-to-cabinet seam, which no cabinet finish fully resists.
- Peeling or bubbling veneer on the cabinet face. Moisture sitting between the veneer and the core, usually from a shower without a functioning exhaust fan.
- Cabinet box separating from the wall. Settlement or a poorly anchored install, which in Lancaster’s expansive soils can appear years after the original remodel.
Each of these has a fix. Not every fix requires tearing out the vanity, and we tell you which is which before you spend a dollar.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Bathroom remodeling in Lancaster runs $9,000 – $28,000 for a full bathroom. A small bathroom remodel runs $5,000 – $12,000. A vanity-only replacement runs $800 – $3,000, and a walk-in shower installation runs $4,500 – $12,000. A tub-to-shower conversion lands between $3,500 and $10,000, and a straight shower replacement runs $3,000 – $8,500.
What drives the number up: tile square footage, whether the plumbing needs to move, whether a permit is required for the plumbing changes, and how much of the existing cabinetry can be reused. What’s included in every quote we write: the cabinet, the counter, the labor, the disposal, the permit if the job needs one, and the paper trail showing each. Parts and labor are always line-itemed separately. Every completed remodel is covered by our written 90-Day Done Right Promise.
DIY or Call Us?
There’s plenty you can check yourself. Open the cabinet doors and look at the hinge plate for loose screws. Pull the drawers out and inspect the slide for rust or bowing. Run a hand along the cabinet bottom under the sink to feel for softness. Photograph the Wellborn label for later. That’s the safe inspection list.
Where DIY goes sideways: replacing the cabinet in a room with active plumbing, cutting a sink opening in a new counter, or re-anchoring a vanity to a wall where the studs have shifted. Get the plumbing wrong and you’re dealing with water damage in a room that already has a moisture problem. Get the anchor wrong and the vanity is a hazard.
If you’re not sure whether the vanity needs to come out, call (888) 427-1810. We’ll walk you through what we see and tell you honestly whether it’s a repair or a replacement.
FAQs
Fifteen to twenty-five years is realistic for a well-installed vanity with a functioning exhaust fan. Lancaster’s low humidity helps the cabinet core but the hot summers cycle wood and finish, which is why the exhaust fan and the caulk seam matter more here than the door style. Call (888) 427-1810 if you’re not sure how much life is left in yours.
Yes, in a meaningful share of cases. Loose hinges, worn slides, and cracked drawer boxes are all repairable without replacing the cabinet. Soft cabinet bottoms, separated boxes, and water-wicking veneer usually mean the cabinet needs replacement. We’ll tell you which camp you’re in after a walkthrough.
A vanity-only replacement is typically a one-day job. A full bathroom remodel runs two to five weeks depending on tile, plumbing, and permit timing with the City of Lancaster. The permit inspection schedule is often the single biggest variable, and we don’t start a job we can’t finish in a reasonable window.
We order through authorized Wellborn dealers and confirm the series, door style, and finish code from the label photograph before the order goes in. Our crew members install it, and the same crew handles the counter, plumbing, and trim. We also work with KraftMaid, Cambria, and Silestone for counter and complementary cabinet needs. Call (888) 427-1810 for a free estimate.
Written by the team at Barrett & Sons Construction Lancaster, serving Lancaster and nearby areas.