Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Unilock Construction in Glendale, CA | Barrett & Sons Construction Lancaster
We provide independent Unilock construction service across Glendale, including paver driveways, patios, and segmental retaining walls built on hillside and flatland lots alike. The one thing that sets our Unilock work apart here: in Glendale’s hillside ZIPs, a retaining wall or sloped driveway is a drainage and slope-stability decision before it’s ever a finish selection. We treat it that way. Call (888) 427-1810 for a free estimate.
Key Takeaways
- We handle Unilock’s full hardscape system: pavers, retaining wall blocks, and permeable jointing.
- We’re an independent installer network – not a Unilock-authorized or factory-certified dealer, and we say so plainly.
- Glendale hillside lots often need drainage and engineering settled before a permit is issued.
- Every eligible job gets permits pulled and inspections signed.
Why Glendale Residents Choose Us for Unilock Service
We know Unilock’s product family line by line – Brussels Block, Beacon Hill, Town Hall, U-Cara – because we’ve installed and repaired them long enough to know how each one behaves once it’s in the ground. That matters in Glendale. A Brussels Block paver driveway that’s perfect on a flat Lancaster lot can fail fast when the same units go on a slope above the 134 freeway. The block isn’t the problem. The base and drainage behind it are.
We source Unilock’s own pavers, wall units, and compatible joint sand and edge restraints to match color and dimension on every repair. No mystery blocks off a van. And our crew members carry up to 28 years of experience, so when a wall is bulging after winter rains, we know the difference between a spot repair that holds and a patch that moves again next season.
If you’re comparing installers, ask whether they’ll settle the drainage detail in writing before work starts. We do. Every scope, every allowance, every change order arrives on paper before a single unit goes down.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Unilock Construction Problems We Solve in Glendale
- Hillside driveway pavers shifting and losing bedding sand. In the 91207 and 91208 hills, runoff concentrates hard at the slope transition. Where no underdrain was built, Brussels Block units lose their bedding and start to walk. We open the detail, correct the base, and rebuild only what moved.
- Retaining-wall courses bulging or leaning. U-Cara and Brussels wall courses lean when winter rain saturates unmanaged clay-and-silt backfill against the face. Glendale’s seasonal rains find every weak drainage joint. The fix is correcting the backfill and drainage, not swapping blocks.
- Efflorescence and surface staining. Glendale’s hard irrigation water plus dust from the dry Verdugo hillside brush leaves white bloom on Town Hall and Brussels pavers. It’s cosmetic, but it reads as age. We clean and re-sand with the right joint material.
- Joint sand washout at aprons and slope toes. Fire-defensible-space clearance work and grading around a home often disturb installed edges, and the sand goes with them. We reset edge restraints and re-sand to spec.
- Failed base under a paver patio. Patios on older Glendale lots sometimes sit over compacted fill that was never prepped for hardscape. When units settle unevenly, the honest fix is a rebuilt base section.
Unilock Service in Glendale: What Local Conditions Mean for Your Equipment
Here’s the local reality that shapes every Unilock job in Glendale: in the hillside ZIPs, a segmental retaining wall above a certain height isn’t just a hardscape purchase. It can pull in a geotechnical report and an engineered wall design under Glendale’s hillside ordinances before a permit is issued. That means the wall-block spec and the drainage detail have to be settled up front – not after the blocks are delivered. A flatland city a few miles away doesn’t carry that weight. A homeowner above the 134 in 91206 or up toward the San Rafael hills does. So the conversation starts with slope, soil, and drainage, and only then moves to whether U-Cara or Beacon Hill is the right wall system. Get that order wrong and you’re rebuilding a wall that passed inspection but couldn’t handle a wet January.
Unilock Models & Products We Service in Glendale
We work with the Unilock lines that show up most on Glendale properties:
- Brussels Block – tumbled, dimensional paver for driveways and walkways.
- Beacon Hill – flagstone-look retaining wall block.
- Town Hall – traditional clay-brick paver, a good match for older Spanish Colonial and Craftsman frontages downtown.
- U-Cara – segmental retaining wall system for taller, engineered walls on hillside lots.
On parts, we stay with Unilock’s own units and compatible joint sand and edge restraints for color and dimensional match. Mixing aftermarket blocks into an existing Unilock wall shows immediately. We don’t claim to stock Unilock parts locally – we specify what the job needs and source it for that job.
See the difference
Before
After
Before
After
Before
AfterUnilock Service Pricing in Glendale
What you’ll pay depends on slope, drainage correction, and how much of the existing base is sound. Here are the ranges we work from:
| Service | Typical Range |
|---|---|
| Paver Driveway Installation | $7,000 – $18,000 |
| Paver Patio Installation | $3,500 – $11,000 |
| Driveway Replacement | $5,000 – $14,000 |
Hillside work runs higher when a geotechnical report or engineered wall design is in play, because the drainage detail and base prep get more involved. A free estimate walks the lot, checks the existing base and drainage, and puts scope and allowance in writing. Call (888) 427-1810 for an exact quote – estimates are free, and we offer a free second opinion on any written estimate you already have.
Serving Glendale, CA – Our Local Coverage Area
We serve Glendale and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Unilock Construction in Glendale
Often yes. Above a certain height in Glendale’s hillside ZIPs, the city’s ordinances and seismic requirements can require a geotechnical report and an engineered wall design before a permit is issued. Settle the wall-block spec and drainage detail first. Call (888) 427-1810 and we’ll walk your lot and tell you what your slope likely triggers.
Because water is moving through or under the units, not because the pavers are bad. Runoff scouring bedding sand at a slope transition or saturated backfill behind a wall is the usual cause. The fix is correcting the drainage and base, then re-sanding with compatible material. Call (888) 427-1810 for a look.
A properly installed paver driveway can serve as a noncombustible surface and help with defensible-space clearance in Glendale’s fire-severity zones above the Verdugo and San Rafael hills. The details – edge restraints, joint material, and clearance from brush – are what matter. Call (888) 427-1810 to talk through your lot.
Town Hall is usually the closest match, with its traditional clay-brick look that sits well against stucco and tile in the 91201 and 91203 blocks near downtown. Brussels Block works too if you want a tumbled, more rustic read. Call (888) 427-1810 and we’ll bring samples to compare in your daylight.
Repair is cheaper when a single course or panel is sound and the base and drainage failed locally – rebuilding that section beats patching pavers that will move again. Full replacement only makes sense when the base or drainage failed along the whole run. Call (888) 427-1810 for a free estimate that tells you which you’re looking at.
Service Areas Near Glendale
Beyond Glendale, we work Unilock hardscape projects in Burbank, La Crescenta-Montrose, Santa Clarita, San Fernando, and Lancaster. If you’re near the foothills or the Antelope Valley, we can look at your lot. Our crews cover the Glendale service area and the towns around it.
Book Your Unilock Service in Glendale Today
Hillside driveway leaning or a wall shedding sand after winter rains? Call (888) 427-1810 for a free estimate. We’re an independent installer network working with Unilock’s full hardscape system, and we’ll settle scope and drainage in writing before work starts. A live person answers, day or night.
Written by the team at Barrett & Sons Construction Lancaster.