A Barrett company - serving Lancaster, CA

Tremron Driveway & Pavers in Lancaster, CA

Driveway & paversDriveway & pavers
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Tremron Driveway & Pavers: The Lancaster Owner’s Guide

We install and repair Tremron-compatible driveways and pavers throughout Lancaster, and a full paver driveway typically runs $7,000 – $18,000 installed. The part in question is almost always a paver, a base course, or a joint-sand system, not a single “unit” you order off a shelf, which is where most owner searches stall. Homeowners here usually discover the failure slowly: one paver rocks underfoot, or an edge sinks a half-inch after a wet winter, or the sand between the joints washes out and the lines start to wander. By the time it’s obvious, water has been working under the surface for a season or two.

Call (888) 427-1810

Which Tremron Models This Applies To

Tremron makes a wide spread of hardscape lines, and Lancaster homes carry most of them. The common ones we see on driveways here are the Mega Olde Towne, Olde Towne, and Mega Bergerac styles, plus the larger-format Roman and Holland profiles on patios and walkways. Matching a replacement means measuring the face, not guessing from a photo: length, width, and thickness in inches, plus the color name if you can read it off an original invoice. Thickness matters most. Tremron driveway pavers are typically 2 3/8 inches (60mm), and a thinner wall or patio paver swapped into a driveway will crack under a vehicle load within a year, so a “close enough” match is a false economy.

On the OEM-versus-aftermarket question: for a repair, a color-matched Tremron paver is worth the wait, because dye lots shift between production runs and a mismatched patch is visible from the street forever. For a fresh installation, Tremron’s full line is available and we’ll show you the samples so you can touch the finish before you commit. We’re an independent contractor and not affiliated with Tremron. We install and repair their products like we do Belgard, Techo-Bloc, and the rest of our hardscape lines.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Tremron Driveway & Pavers Is Failing

  • Paver rocking or loose underfoot. That means the bedding sand has shifted or the base wasn’t compacted deep enough, usually because a contractor skipped a layer of base course to save a day.
  • Sinking at the driveway apron or edges. Water is running under the edge and washing out fines, most often where the paver meets the street or a downspout dumps nearby.
  • Sand washing out of the joints. The joint sand is the pavers’ interlock. When it drains away, the surface loses its grip on itself and pavers start spreading.
  • Weed growth in the seams. Persistent weeds between joints point to missing polymeric sand or a base that’s stayed saturated long enough to grow roots.
  • Hairline cracks or chipped corners. Often a thin paver or a vehicle load over an un-compacted patch, which is why matching the correct 60mm thickness matters.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

For Lancaster, here’s the honest installed range for the work behind these failures:

Repair or install Typical range
Spot paver repair (lift, re-base, reset) $300 – $900
Joint sand re-sanding (whole driveway) $250 – $700
Paver driveway installation $7,000 – $18,000
Paver patio installation $3,500 – $11,000

What moves the price: square footage, how deep the base needs to go, whether the old driveway comes out, and the paver profile you pick. A spot repair stays low because we’re lifting only the failed section. A full install carries the base, compaction, edge restraint, polymeric joint sand, and the paver itself. Every scope and every allowance is on the written estimate before work starts, and any change is a written change order before it happens.

DIY or Call Us?

You can safely pull a joint-sand sample between your fingers, hose it to check drainage, and note which pavers rock. Re-sanding a compact driveway is a reasonable weekend job. What goes wrong is the base and lift work. Lifting pavers, re-compacting a proper base in layers, and resetting them so the interlock holds takes the right plate compactor and a bead of patience, and a driveway that looks right but sits on a shallow base fails again the next rainy season. You don’t need a hardscape crew for a one-paver fix, but for anything structural, call (888) 427-1810 and we’ll give you a straight read on whether it’s a $400 fix or a $10,000 rebuild.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 427-1810
Local Service Coverage

Request a Free Estimate in Lancaster

Tell us what you need - Barrett & Sons Construction Lancaster responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch