Home additions & ADU
Kitchen remodeling
Bathroom remodeling
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Therma-Tru Home Additions & ADU: The Lancaster Owner’s Guide
If you’re planning a Therma-Tru-equipped addition or ADU in Lancaster, an attached addition runs $45,000 – $130,000 and a detached ADU runs $90,000 – $220,000 installed, permitted, and inspected. We’re an independent contractor, not affiliated with Therma-Tru, but we install and finish around their doors and entry systems on addition and ADU work throughout the Antelope Valley. Most owners reach this page when a Therma-Tru door in an older addition starts binding, sagging at the hinge, or leaking at the threshold – often the first clue the addition’s framing or flashing has moved underneath it. A door that drags in July and seals tight in January is telling you something.
Which Therma-Tru Models This Applies To
Therma-Tru entry doors show up in Lancaster additions under several lines: the Classic-Craft collection (fiberglass, stained or painted), Smooth-Star (paint-grade fiberglass slabs), Fiber-Classic (wood-grain fiberglass), and the steel-edged and steel-full lines. Sidelites and transoms from the same series usually share a frame family, which matters when you’re replacing a rotted jamb instead of just the slab.
Here’s the compatibility gotcha that catches people: a Therma-Tru slab is sized to its frame, not to a generic rough opening. Pull the hinge-side jamb sticker or the label on the door’s top edge – it carries the series and the size code. Measure the slab width, height, and thickness at the hinge side, not the middle, because a sagging addition door will read wrong at center. An OEM slab matched to your existing frame saves the most labor. A quality aftermarket fiberglass slab can work if the frame is sound, but you’ll likely be drilling new hinge and lockset mortises, and the weatherstripping channel has to line up exactly. Where the frame is failing, we set a complete prehung unit instead and reframe the rough opening to spec.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Therma-Tru Home Additions & ADU Is Failing
- The door drags or binds in summer, then frees up in winter. Antelope Valley swings from triple-digit July heat to freezing nights in December, and that cycle moves wood framing and can warp a fiberglass slab. Binding that comes and goes is a seasonal movement problem, not a hinge problem.
- Daylight or a draft at the threshold or corners. Failed sill flashing or a threshold that’s settled with the addition slab lets wind-driven dust and rain in. In Lancaster, our spring wind events find every gap, and dust pooling inside the door is a reliable early warning.
- Water staining on the interior jamb near the floor. Usually the exterior flashing detail or a missing kick-out at the wall transition, not the door itself. Left alone, it rots the rough opening and the subfloor edge.
- Hinge screws that spin or won’t tighten. The jamb wood has softened from moisture or the screws have wallowed out the holes. A spinning screw means the frame is compromised, not just the hardware.
- The slab is delaminating, cracked, or the finish is blistering on the sun-facing side. Southern exposure in Lancaster is brutal – a south- or west-facing fiberglass door takes years of UV that a shaded door never sees. Surface failure here often means the slab is near the end of its service life.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For the addition or ADU project as a whole, Lancaster pricing runs $45,000 – $130,000 for an attached addition and $90,000 – $220,000 for a detached ADU. If you’re only replacing a failing Therma-Tru door or reframing the rough opening inside an existing addition, that’s a smaller repair scope we quote separately after we see it. What drives the range: square footage, whether the foundation is slab-on-grade or raised, whether utilities (electrical, plumbing, HVAC) have to be extended, and how much exterior finishing – stucco, roofing tie-in, hardscape – the addition needs to match the house.
Every scope, allowance, and price change comes to you as a written change order before work proceeds. Permits are pulled and inspections signed on every eligible job. If it’s not done right, our 90-Day Done Right Promise brings Tom back on one call. Standing offers: $40 off any repair over $200, a free second opinion on any written estimate, no trip charge inside the county, and a permanent 10% senior and veteran discount.
DIY or Call Us?
An owner can safely check a few things: look for daylight at the threshold, run a hand around the frame for drafts, check that hinge screws bite, and note whether the binding is seasonal. What you shouldn’t do yourself on an addition door is reframe the rough opening or reset flashing. That’s where water intrusion starts, and a door that’s flashed wrong will look fine for a season and then rot the wall. Same for anything structural in the addition itself – if a header or the framing around the opening has moved, that’s a framing call, not a hardware swap.
If the door is dragging, leaking, or the frame is unsound, we’ll tell you honestly whether it’s a slab swap or a full reframe. Call us at (888) 427-1810 for a free estimate.
FAQs
A well-installed fiberglass Therma-Tru door typically runs 20 to 30 years, but on a south- or west-facing wall in the Antelope Valley the finish and weatherstripping wear faster – plan on resealing or refinishing every 5 to 7 years to get the full life. Call (888) 427-1810 for a free estimate if you’re unsure where yours stands.
Often yes. Hardware, weatherstripping, and hinge problems are repair jobs. A warped slab, delaminated skin, or rotted jamb means replacement. We’ll tell you which one you’re looking at after we see it. Call (888) 427-1810 for a free estimate.
A slab replacement is typically a few hours. A full prehung unit with rough opening reframing is usually a full day, more if the flashing detail has to be rebuilt. Call (888) 427-1810 to schedule your free estimate.
We identify the series and size from the jamb label and hinge-side measurements, then order the correct slab or prehung unit to match. We don’t stock parts on a truck – everything is ordered to your door. Call (888) 427-1810 for a free estimate.
We also work with KraftMaid, Cambria, and Silestone on the interior side of an addition or ADU – cabinets, counters, finishes that match the rest of your house. Therma-Tru doors and entry systems we handle, and the project as a whole we run start to finish.
If you’re planning an addition or ADU in Lancaster, or you’ve got a Therma-Tru door that’s failing and want an honest answer on repair versus replace, call Barrett & Sons Construction at (888) 427-1810. Estimates are free, and a live person answers every call, 24 hours a day.
Written by the team at Barrett & Sons Construction Lancaster, serving Lancaster and nearby areas.