Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Schluter Kitchen Remodeling: The Lancaster Owner’s Guide
Schluter kitchen remodeling in Lancaster runs $14,000 to $45,000 installed, and the waterproofing layer under your tile is usually where the trouble hides. Schluter’s Kerdi, Ditra, and Kerdi-Board systems are genuinely good products, but they fail in predictable ways when installed over a slab that moves or in a house where the afternoon heat hits 105°F and nobody planned for expansion. Owners here usually discover the problem the same way: a grout line at the toe kick crumbles, the caulk along the backsplash turns black within a season, or a tile sounds hollow when you tap it near the sink. By then the membrane underneath has been wet for months.
Which Schluter Models This Applies To
Schluter isn’t a machine with a serial number. It’s a family of underlayment systems, and the part you need depends on which one went into your floor or wall. The common ones in Lancaster kitchens are Schluter-DITRA (the orange dimpled mat under tile floors), Schluter-DITRA-XL (same product, larger roll, same 3/16-inch thickness), KERDI (the fleece-faced waterproof sheet for showers and wet walls), and KERDI-BOARD (the foam-backed board used for walls and benches). Thicknesses and roll widths differ, and a 5/16-inch DITRA is not interchangeable with standard 3/16-inch DITRA on a floor where finished height matters against a cabinet toe kick.
To identify what you have, look for the printed orange band on the roll edge or the stamp on the board face, and measure thickness with a caliper if you can. Here’s the OEM decision: Schluter’s own KERDI-BAND and KERDI-FIX are worth buying genuine, because the fleece-to-fleece bond is the whole point of the system and generic banding doesn’t grab the same way. For metal profiles like the QUADEC and SCHIENE trim, a quality aftermarket equivalent is usually fine if the finish matches. We’re an independent contractor in Lancaster, not affiliated with Schluter, so we source what actually fits and say so when the cheaper part is the wrong call.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Schluter Kitchen Remodeling Is Failing
- Hollow thuds when you tap the floor. That’s a debonded tile, usually from thinset that skimmed over before the tile went down. In Lancaster’s dry heat, open-time shrinks fast.
- Grout cracking in straight lines. Cracks that track along a slope or a floor transition point to slab movement the membrane wasn’t set to absorb.
- Dark caulk at the backsplash and toe kick. Moisture is wicking up from the slab through a compromised seam, and black mold behind caulk doesn’t clean out.
- Loose or lifting tile near the sink and dishwasher. A KERDI seam that wasn’t overlapped the required 2 inches lets water past the waterproofing.
- A soft spot or bounce in the floor. The subfloor or slab moved and the DITRA did its job, but the mortar under it didn’t. This one needs a tear-out to confirm.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Repairing the waterproofing or underlayment under an existing kitchen floor is priced by scope, not by the roll. If we’re resetting a small area, expect a repair in the $400 to $1,800 range once tile removal, new membrane, and reset are counted. A full kitchen remodel that includes proper Schluter detailing runs $14,000 to $45,000. A small kitchen remodel sits at $9,000 to $20,000, cabinet installation at $4,000 to $13,000, countertop installation at $2,000 to $6,500, backsplash installation at $800 to $2,500, and a kitchen island at $3,000 to $10,000.
What drives the number: how much tile has to come up, whether the slab needs leveling first, and how much of the waterproofing was done wrong originally. We quote parts and labor as separate lines so you can see exactly what the membrane and banding cost versus the install. Every completed job carries our written 90-Day Done Right Promise, and any price change arrives as a written change order before work proceeds.
DIY or Call Us?
You can safely check a few things yourself: tap the floor with a screwdriver handle and note where it sounds hollow, press a paper towel against the caulk at the toe kick to see if it comes back damp, and look under the sink for staining on the cabinet base. What you shouldn’t do is peel up a tile or cut into the membrane to “see what’s going on.” Once you breach the waterproofing you’ve created the leak you were trying to find, and reinstalling a KERDI seam correctly requires the right thinset, the right overlap, and a flood test. That’s not a Saturday job. If you’ve got a soft floor or active moisture, call (888) 427-1810 and we’ll take a look before it spreads under the cabinets.
FAQs
A properly installed KERDI or DITRA system should last the life of the tile, easily 20 to 30 years. The catch in Lancaster is heat and slab movement, not the product itself; most failures we see trace back to installation error, not a manufacturing defect. Call (888) 427-1810 for a free estimate if yours is failing early.
Often yes, if the failure is localized to one seam or a small tile field. A spot repair runs $400 to $1,800 and is worth doing when the membrane around it is still sound. If water has been trapped under the field for a year or more, replacement is the honest answer. Call (888) 427-1810 for a free estimate and we’ll tell you which one you’re looking at.
A localized membrane repair is typically a 1 to 2 day job. A full kitchen remodel involving new waterproofing and tile runs several weeks depending on cabinet and countertop lead times. We give you a written schedule up front. Call (888) 427-1810 to get on the calendar.
We buy genuine Schluter membrane, banding, and profiles through authorized distributors so the warranty stays intact. We don’t stock parts on a truck; each job is ordered to spec after we confirm what’s actually under your tile. Call (888) 427-1810 for a free estimate.
We’ve been doing kitchen work in Lancaster and the surrounding Antelope Valley for over 29 years, and we’re still owner-operated, with Tom Barrett and his sons on-site most days. That means permits pulled and inspections signed on every eligible job, allowances written into the contract, and background-checked crew members who carry our name. We also install KraftMaid and Cambria, and work with Silestone when that’s the right fit. If you’ve been burned by a company that quoted one price on the phone and handed you a different bill at the door, call (888) 427-1810 for a free estimate. A live person answers 24 hours a day, seven days a week. We’ll bring a free second opinion on any written estimate you already have, and there’s no trip charge inside the county.
Written by the team at Barrett & Sons Construction Lancaster, serving Lancaster and nearby areas.