A Barrett company - serving Lancaster, CA

Sakrete Driveway & Pavers in Lancaster, CA

Driveway & paversDriveway & pavers
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Sakrete Driveway & Pavers: The Lancaster Owner’s Guide

We install and repair Sakrete-compatible driveway and paver systems across Lancaster, and most jobs run $7,000-$18,000 for a full paver driveway or $250-$700 for resealing an existing one. A typical reseal or joint repair is a one-day job once the surface is prepped and dry. Most Lancaster homeowners first notice the failure after a windstorm or a hard freeze: sand joints wash out, pavers shift, and that one corner of the driveway starts rocking every time a car pulls in.

Call (888) 427-1810

Here in the Antelope Valley we see the same pattern every spring. Sakrete’s polymeric sand and paver base products are good material, but they’re formulated for a wide range of climates, and Lancaster’s swing from 100-degree summers to overnight freezes in January puts real stress on the joints. That’s usually where the trouble starts.

Which Sakrete Models This Applies To

Sakrete makes a few distinct product lines that fall under “driveway and pavers,” and getting the match right matters more than most people realize. The main ones are Sakrete Paver Set polymeric sand, Sakrete Sand Mix, Sakrete Play Sand, and Sakrete’s paver base and concrete mixes. Each has a different aggregate size, set time, and traffic rating, and the labels look similar at a glance.

To identify what you have, check the bag’s product code printed near the bottom seam and the net weight (Sakrete’s polymeric sand comes in both 50 lb and 65 lb bags, and the 65 lb version is the one rated for driveways). If the bag is gone, measure the joint width: polymeric sand is designed for joints between 1/8″ and 1/2″, and anything wider needs a different fill.

On the OEM-versus-aftermarket question, we’re honest about it. Sakrete’s own polymeric sand is a solid choice and we install it often. But for high-traffic driveways in Lancaster, a stabilized joint sand from a brand like Techno-Bloc or a polyurethane-based joint sand often holds up longer through the valley’s temperature swings. We price both so you can see the difference on paper before you commit. We’re an independent installer and not affiliated with Sakrete; we work with the material because it’s reliable, not because we’re tied to it.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Sakrete Driveway & Pavers Is Failing

  • Joint sand washing out after rain. Sakrete’s polymeric sand can erode if it wasn’t compacted properly or if the joints were too wide at install. Once the sand is gone, water gets under the pavers and the base starts to settle.
  • Pavers rocking or shifting underfoot. This is almost always a base failure, not a paver failure. In Lancaster, the culprit is usually soil that wasn’t compacted to the right depth before the sand went down.
  • Weeds sprouting in the joints. A sign the polymeric sand has broken down or was never fully cured. Sakrete’s sand needs to be misted and left alone for 24 hours to set, and skipping that step shows up a season later.
  • Efflorescence (white powdery haze). Common in the Antelope Valley’s dry climate, this is salt migrating out of the concrete or base. It’s cosmetic but signals moisture moving where it shouldn’t.
  • Ponding water or sunken spots. The base has failed or the slope is wrong. This one rarely fixes itself and usually needs the pavers pulled and the base re-graded.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Here’s what these jobs actually cost in Lancaster. These are installed prices, meaning material plus labor, not a materials-only quote that leaves you hunting for a crew.

  • Paver driveway installation: $7,000-$18,000
  • Concrete driveway installation: $4,500-$12,000
  • Asphalt driveway paving: $3,500-$9,000
  • Driveway replacement: $5,000-$14,000
  • Driveway sealing: $250-$700
  • Paver patio installation: $3,500-$11,000

What drives the range: square footage, whether the old surface has to come out, base depth, and whether you choose standard concrete pavers or a premium line. We quote every scope as a written line-item estimate, and any change to that scope arrives as a written change order before we touch the job. Every eligible driveway and paver job gets permits pulled and inspections signed, and every completed job is backed by our 90-Day Done Right Promise.

DIY or Call Us?

Some of this you can handle yourself. Checking joint depth, sweeping off loose sand, and re-misting a fresh polymeric sand install are all reasonable weekend work. Resealing a small patio? Go ahead.

Where DIY goes wrong is anything involving the base. Tearing out pavers to re-grade a sunken section means lifting 60 to 80 pounds per square foot of material, and if the compacted base underneath isn’t rebuilt correctly, the same failure comes back within a season. We’ve also seen homeowners try to top-dress a failed joint with fresh polymeric sand over wet or dirty joints, and that sand never bonds. The material isn’t dangerous, but the process is unforgiving.

If the pavers are rocking, the water is ponding, or the joints have failed twice, call us at (888) 427-1810 for a free estimate. We’ll tell you straight whether it’s a repair or a rebuild.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 427-1810
Local Service Coverage

Request a Free Estimate in Lancaster

Tell us what you need - Barrett & Sons Construction Lancaster responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch