A Barrett company - serving Lancaster, CA

Quikrete Roofing in Lancaster, CA

RoofingRoofing
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Quikrete Roofing: The Lancaster Owner’s Guide

Quikrete roofing products (concrete and acrylic roof coatings, patch and repair mortars for tile and flat roofs) are installed by Barrett & Sons Construction in Lancaster at roughly $400 – $1,800 for a targeted roof repair, or $8,000 – $20,000 for a full roof replacement when the surface is past coating. We’re an independent contractor and not affiliated with Quikrete, but we’re familiar with the products and install them to spec. Most owners discover the failure the same way: a brown water ring on a ceiling near an exterior wall, granules or pale chips in the rain gutter, or a hairline crack over the garage that shows up after the first 20-degree night.

Call (888) 427-1810

Key Takeaways

  • Quikrete roof products are coatings, patches, and mortars, not a roofing system by themselves. The substrate underneath is what really fails.
  • Lancaster’s swing from 100°F summers to below-freezing desert nights is brutal on acrylic and concrete coatings. The thermal movement cracks them faster than in coastal California.
  • Small repairs run $400 – $1,800. If the coating is the only layer you have above the deck, coating again will not fix a leak.
  • Every eligible job gets permits pulled and inspections signed. You get a written change order before any scope moves.

Which Quikrete Models This Applies To

Quikrete doesn’t sell a shingle or a tile under its own label. What you’ll actually find on a Lancaster roof is one of two things: a Quikrete roof coating (fibered or fiber-free acrylic, plus concrete patch mixes for tile mortar and flat-roof repairs) or a Quikrete mortar or patch product used to reset or repair a tile field. That matters because the “right part” isn’t a serial number. It’s the product number printed on the pail or bag.

Look at the edge of the lid or the side of the bag: you’ll see a product number and a net weight in pounds. Note both. Roof coating pails typically come in 1-gallon and 4.75-gallon sizes; patch mixes come in 10-, 40-, and 80-pound bags. A 40-pound bag of floor-level patch is not the same mix as a roof-surface product made to move with the deck. Owners who buy the wrong one and trowel it on get a chalky crust that spiders apart within a season.

On the OEM-versus-aftermarket question: there’s no OEM “Quikrete replacement part.” The product is the part. You’re matching a product specification to a roof, a substrate, and a climate, not swapping a worn component for a factory piece. A quality aftermarket coating from a roofing-specific brand can outperform a general-purpose concrete coating on a sloped roof, and we’ll tell you when that’s the honest answer. We don’t stock parts and we don’t carry them on a truck. We measure, spec, and install.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Quikrete Roofing Is Failing

  • Spiderweb cracks across the coating. Thermal cycling. Lancaster bakes to triple digits in July and drops near freezing in January, and the coating expands and contracts against a ridge or parapet that doesn’t move the same way. The cracks start hairline and widen.
  • Chalky powder on your hand after touching the surface. UV breakdown. Acrylic coatings on a west-facing slope in the Antelope Valley take more sun than anywhere else in the county. When it chalks, it’s already lost its reflectivity.
  • Blistering or bubbles under the coating. Moisture trapped beneath the film. That’s a sign the roof was coated over a wet deck or a failing substrate, and no topcoat will hold once the trapped water starts pushing.
  • Pale granules or chips in the gutter and at the downspout. Surface erosion. On a concrete or coating roof this often means you’ve reached the end of the coating’s service life, and the deck is now exposed to sun.
  • Staining on a ceiling or along an exterior wall inside the house. Water is getting past the surface and traveling. Once you see the stain indoors, the repair is bigger than a recoat, because the leak has been working for a while.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

For a Lancaster roof, the number depends on which problem you actually have. Here’s the honest range:

Scope Installed Price Range
Targeted roof repair (coating repair, flashing, patching) $400 – $1,800
Tile roof repair (reset or replace broken tiles, mortar work) $600 – $2,500
Full roof replacement (coating is gone, substrate is exposed) $8,000 – $20,000
Metal roof installation (if you’re moving to a longer-life roof) $15,000 – $40,000

What drives the high end: roof pitch, number of penetrations (vents, skylights, swamp cooler mounts – mostly on the older east-side Lancaster homes), whether the decking is sound, and how much old coating has to come off before the new surface goes on. We list materials and labor line by line, you see the product number and the quantity, and the price change comes in writing before anything is torn off. Every eligible job includes permits pulled and inspections signed, and every completed job carries our written 90-Day Done Right Promise. If it’s not right, one call brings us back.

DIY or Call Us?

What you can safely check: look at the pail or bag for the product number, snap a few photos of the cracked or chalky section from the ground with a zoom lens, and note whether the ceiling stain has grown since the last rain. That information helps a lot when you call.

What we’d steer you away from is walking the roof yourself, particularly on a pitch above 4/12 or on an older Lancaster home where the decking hasn’t been inspected. Roof work is the one part of a house where a fall happens in under two seconds and the repair bill is a hospital stay. Add a coating over a wet substrate and you’ve paid twice for the same problem. We’ve seen it more than once: an owner coats over a soft spot, the leak comes back in the first heavy winter, and now a full tear-off is on the table.

Our crew members carry up to 28 years of experience and we’ve been at this since 1998, owner-operated the whole way. Call (888) 427-1810 for a free estimate. A live person answers, day or night.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 427-1810
Local Service Coverage

Request a Free Estimate in Lancaster

Tell us what you need - Barrett & Sons Construction Lancaster responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch