Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Lancaster Homeowners Choose PGT Construction
We provide independent PGT construction service in Lancaster, CA. Our crews work alongside independent local PGT specialists who install and repair PGT’s WinGuard impact aluminum windows and sliding glass doors, Aluminum Series single-hung and horizontal sliders, Vinyl Series double-hung and casements, and PGT slider systems. In a high-desert town that takes wind seriously, PGT frames and glazing channels have to be set correctly, and that’s the work we focus on.
To be clear about who we are: Barrett & Sons Construction Lancaster is an independent PGT service provider. We’re not affiliated with, authorized by, or sponsored by PGT. We don’t claim manufacturer status. What we offer is a crew that reads the sill and the frame profile before touching a trim piece, plus every price change in writing before a single fastener moves.
We’ve been owner-operated since 1998. Tom Barrett and his sons are on-site most days, and a live person answers the phone at (888) 427-1810.
Why Trust Barrett & Sons Construction Lancaster for Your PGT Construction?
Our technicians have up to 28 years of experience, and a fair share of that has been spent on aluminum window and door systems like PGT’s, where a millimeter of sill gap matters more than the brand on the carton. When a PGT unit shows up, the crew reads the label rather than assuming a profile. That means matching the correct glazing channel, weatherstripping pile height and screen-track dimensions for that specific series.
We also insist on OEM-compatible parts wherever the frame profile is still current. On a WinGuard slider, that’s the right roller set, the right bottom pile seal, and the right weep-hole cover – not a universal kit off a shelf that “fits close enough.” On vinyl double-hungs and casements, it means matching the tilt-latch and balance assembly to the sash weight.
Warranty-safe work matters here too. We don’t modify frames in ways that compromise a factory seal, and we document every part we replace so an owner has a paper trail if a warranty question ever comes up. Every job runs on written scope and written change orders, and every completed project is backed by our 90-Day Done Right Promise. If something isn’t right after a PGT install, the callback is on us.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common PGT Construction Problems We Fix in Lancaster
PGT makes a solid product, but Lancaster’s conditions are hard on windows and doors – intense UV, wind-driven dust, and summer heat well over 100°F. Here are the five issues we see most often on PGT units in Antelope Valley homes:
- Failed or gapped weatherstripping on PGT sliders. Pile seals compress over time, and dust pushed by persistent winds works its way past the gap at the jamb. The typical symptom is a sill channel packed with grit after a windy week, plus a draft you can feel at the latch. Replacing the pile and re-seating the panel usually fixes it.
- Hairline cracks or seal-edge clouding on WinGuard laminated impact glass. The laminated interlayer can take small cracks at the perimeter or develop a milky look at the seal edge without the pane ever breaking. UV exposure speeds this up. On a PGT impact unit, the pane is replaceable independently of the frame, so this is a glass job, not a whole-window job.
- Roller and track wear on PGT sliding glass doors. Older PGT sliders develop dragging panels and difficulty latching when rollers flatten and the panel sits low in the track. The panel goes out of square, the strike no longer lines up, and the latch won’t catch cleanly.
- Corrosion and paint flaking at aluminum frame corners. Aluminum PGT frames on wind-exposed walls can show white oxidation and flaking at the corners over time. Weep holes clogged with dust and debris trap water in the sill channel, and that water eventually works into the frame joint. Cleaning weep holes and re-sealing frame corners stops a small issue from becoming a sill replacement.
- Out-of-square openings on tract homes built fast in the 1980s-2000s boom. Lancaster’s tract housing went up quick, and many rough openings aren’t perfectly square. A PGT window dropped into an out-of-square opening will show uneven reveals and premature seal failure. We check the opening before we trim it, not after.
Typical PGT slider job, start to finish: A homeowner notices a PGT sliding glass door that no longer latches cleanly and leaves a visible gap along the jamb, and the sill fills with dust after a windy week. The usual cause is a worn roller set combined with compressed pile weatherstripping, which lets the panel sit low and out of square in the track. A qualified local pro pulls the panel, checks the sill for corrosion or water staining, replaces the rollers and seal, adjusts the strike and weep holes, and flags any laminated glass showing seal-edge clouding for a matching replacement pane.
PGT Parts & Our Repair-vs-Replace Approach
Parts for PGT jobs get sourced per job, not pulled from a local stock. When the frame profile is current, we source OEM PGT replacement glass, rollers, weatherstripping and screens. On discontinued PGT profiles, quality aftermarket rollers, seals and screen frames are a sound match if they’re sized and tested correctly. We check fit before we install, not after.
Repair vs. replace is an honest call, and it comes down to the frame and sill. If the frame and sill are structurally solid, we repair individual sashes, glass and hardware. Full unit replacement only makes sense when frame corrosion, active water intrusion or repeated seal failure makes patching a money-loser. Replacing a perfectly good PGT frame because the roller set wore out is not a recommendation you’ll hear from us.
Call (888) 427-1810 for a free second opinion on any written PGT estimate you’ve received. We’ll tell you plainly whether the repair or replacement path makes sense.
Our PGT Service Process – Step by Step
- 1
Diagnosis. We read the PGT unit label, measure the frame profile and check the sill for corrosion, water staining and out-of-square conditions. On impact units, we test each pane for seal-edge clouding before assuming a full replacement.
- 2
Repair or install. We pull panels, replace rollers, pile seals and glazing gaskets, and set new units plumb and square with the correct shim sequence for the frame. Written scope and any price change arrive in writing before work proceeds.
- 3
Test. Every slider, casement and double-hung gets operated through a full cycle. Latches, tilt-latches and weep holes are checked. A wind-driven spray test confirms weatherstripping seals at the jamb.
- 4
Warranty. The completed job is backed by our written 90-Day Done Right Promise. If a PGT seal, roller or latch isn’t working right, one call brings us back.
See the difference
Before
After
Before
After
Before
AfterPGT Products We Service & Install in Lancaster
We work on PGT’s WinGuard Series impact-resistant aluminum windows and sliding glass doors – the Florida-born line that built the PGT name. That covers the Aluminum Series single-hung and horizontal slider windows common on Lancaster tract exteriors, the Vinyl Series double-hung and casement windows, and PGT sliding glass door systems in both impact and non-impact versions. On a Lancaster install or repair, the job is more than hanging a window. It’s matching the frame profile to the opening, respecting PGT’s glazing channel and screen track, and setting the unit for wind resilience on a property where the wind doesn’t let up. That kind of work takes a crew that knows PGT’s details, not a general installer guessing at trim.
We Also Service These Brands
We’re not a single-brand shop. Alongside PGT work, our crews handle KraftMaid cabinets, Cambria and Silestone countertops, and Kohler fixtures on the remodel side. Lancaster homeowners replacing a window often find themselves touching the exterior envelope, and that’s where roof repair and finish work come in on the same visit – no second contractor, no second change order. Ask about the full scope in a free estimate.
FAQs – PGT Construction Service in Lancaster
No. We are an independent PGT service provider and are not affiliated with, authorized by or sponsored by PGT. We work with independent local PGT specialists who know the product lines, read the labels and source correct parts without claiming a manufacturer relationship. Every price, scope, and warranty term is in writing before work begins. Call (888) 427-1810 if you have a PGT unit that needs an honest look.
Yes, on current PGT frame profiles, we source OEM PGT replacement glass, rollers, weatherstripping and screens. On discontinued PGT profiles, we use quality aftermarket rollers, seals and screen frames that are sized and tested to match, and we tell you which is which before we install. You’ll never get an aftermarket part sold as OEM. Call (888) 427-1810 for a parts quote.
Most single-unit PGT repairs (a slider service, a pane replacement, a weatherstripping job) take half a day to a full day. Full PGT window or door replacements across a typical Lancaster tract home run longer, often two to four days depending on unit count and whether surrounding trim, stucco or roof flashing needs repair. We give you a written schedule with the estimate. Call (888) 427-1810 for a project-specific timeline.
We cover PGT WinGuard Series impact aluminum windows and sliding glass doors, PGT Aluminum Series single-hung and horizontal slider windows, PGT Vinyl Series double-hung and casement windows, and PGT sliding glass door systems in both impact and non-impact versions. If your label says PGT and you’re unsure which series, read us the model code and we’ll tell you. Call (888) 427-1810.
Proper service by a qualified independent installer using OEM-compatible parts on a current frame profile does not in itself void a PGT warranty. Problems arise when a frame is modified in ways that compromise the factory seal, or when an aftermarket part is installed incorrectly. We avoid both and document every part we replace so you have a paper trail. Read your own PGT warranty terms carefully, and call (888) 427-1810 with questions.
Here are market-calibrated ranges for PGT-related work in Lancaster and the surrounding Antelope Valley:
| Service | Price Range |
|---|---|
| Window Replacement | $4,500 – $15,000 |
| Impact Window Installation | $8,000 – $25,000 |
| Roof Repair | $400 – $1,800 |
| Metal Roof Installation | $15,000 – $40,000 |
Actual cost depends on unit count, series, whether the opening needs reframing, and any exterior finish repair. Call (888) 427-1810 for an exact quote – estimates are free.
Book Your PGT Service in Lancaster, CA
If you have a PGT window or sliding glass door that needs a trained eye, call (888) 427-1810 to schedule your free estimate. We’re an independent PGT service provider working with independent local PGT specialists, and every completed job is backed by our 90-Day Done Right Promise with written scope and change orders on every contract. Call today and we’ll get your Lancaster PGT project on the schedule.
Written by the team at Barrett & Sons Construction Lancaster.