A Barrett company - serving Lancaster, CA

PGT Kitchen Remodeling in Lancaster, CA

Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

PGT Kitchen Remodeling: The Lancaster Owner’s Guide

Installing PGT kitchen components in Lancaster typically runs $14,000 – $45,000 for a full remodel, $9,000 – $20,000 for a small kitchen, and $4,000 – $13,000 for cabinet installation alone. A kitchen island adds $3,000 – $10,000. Most homeowners we hear from in Lancaster discover the problem mid-project: PGT-spec cabinets arrive off-square in a 30-year-old Lancaster house, or a prior installer swapped out a factory part and nothing lines up anymore. The kitchen stops closing, the drawers rack, and suddenly the project is a repair.

Call (888) 427-1810

We’re Barrett & Sons Construction, an independent contractor, not affiliated with PGT. We work with PGT kitchen components as part of full remodels across Lancaster and the surrounding Antelope Valley.

Which PGT Models This Applies To

PGT kitchen components show up across their cabinet, drawer, and door lines, and the compatibility question almost always comes down to the hinge bore and the drawer glide spec, not the color. The model tag sits inside the cabinet door, on the back panel, or on the underside of a drawer box. Photograph that tag before you call anyone, including us.

Here’s the gotcha that bites Lancaster owners: PGT changed its drawer glide mounting pattern on several series, and a glide from the older pattern will not seat in the newer box without drilling. Match the series, not just the brand. Same with hinge plates: the overlay and cup depth have to match or the door sits proud and won’t close flush.

OEM parts from PGT are the safe bet when the cabinet is under its original warranty or under 10 years old. For older cabins, a quality aftermarket glide or hinge matched to the same bore spec does the job and costs less. We’ll tell you which way to go once we see the tag and measure the bore.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your PGT Kitchen Remodeling Is Failing

These are the five things Lancaster owners call us about, and what’s usually behind each:

  • Doors that won’t close flush or rub the frame. The hinge plate has shifted or the cupboard itself has racked. In Lancaster’s dry heat, wood cabinets move more than they do on the coast, and a hinge that was snug in a wet year loosens in summer.
  • Drawers that stick, sag, or drop off the glide. The glide is worn or the mounting screws have pulled out of soft fiberboard. Very common in kitchens past 12 years.
  • Soft-close that quit closing soft. The damper cartridge in the glide is spent. It’s a wear part, not a defect, and it fails faster in a kitchen that gets used hard.
  • Cracks at the cabinet seams or around the hinge screws. Usually installation stress or a screw that was overtightened at the factory or on the job. It gets worse over time.
  • A mismatched replacement part that doesn’t fit right. Someone before you grabbed an off-the-shelf glide. The bore is off by a millimeter and the drawer racks sideways every time it opens.

Replacement Cost & What’s Included

What you’ll pay installed in Lancaster, parts and labor together:

  • Cabinet installation: $4,000 – $13,000
  • Countertop installation: $2,000 – $6,500
  • Backsplash installation: $800 – $2,500
  • Kitchen island installation: $3,000 – $10,000
  • Small kitchen remodel: $9,000 – $20,000
  • Full kitchen remodel: $14,000 – $45,000

What drives the range: cabinet count and box construction, whether the layout moves, countertop material (Cambria and Silestone sit high; laminate sits low), and whether the walls need square-up before anything installs. Lancaster’s older housing stock often needs that square-up, and we put it in the written scope, not on a surprise invoice. Premium brands we install include KraftMaid and Cambria, plus Silestone and other PGT-compatible lines. Every eligible job gets permits pulled and inspections signed, and the work is backed by our written 90-Day Done Right Promise. Any price change comes to you in writing first.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

DIY or Call Us?

You can safely check the model tag, measure the hinge bore and drawer glide spacing with a tape, and photograph the failing part. That’s it. That’s where we’d stop. Swapping a glide or hinge on a PGT cabinet sounds simple until the bore is off or the box is soft and the screw won’t hold, and then you’ve got a half-installed drawer and no clear next step. If the cabinet itself has racked or the wall behind it is out of square, this is not a DIY job. Call (888) 427-1810 and we’ll tell you straight whether it’s a part swap or a bigger fix. Estimates are free.

FAQs

How long do PGT kitchen components last in Lancaster? Cabinet hinges and glides typically hold up 10 – 15 years before wear parts fail; the boxes and doors last much longer if they were installed square. Lancaster’s dry heat and big seasonal swings work on wood, so expect hinges and glides to need attention before the cabinets themselves do.

Can the part be repaired instead of replaced? Sometimes, yes. A loose hinge screw can be filled and reset, and a worn glide can be swapped without touching the cabinet. But if the box has racked or the bore is damaged, a repair just delays the replacement. We’ll tell you which you’re looking at, no charge for the second opinion.

How long does the swap take? A hinge or glide replacement is a short visit, usually under an hour for a few parts. A full cabinet or countertop replacement is scheduled work measured in days, not hours. We’ll give you the timeline in writing before we start.

How do you source the PGT part? We match the model tag and bore spec first, then source OEM PGT parts or a quality aftermarket equivalent that fits the same spec. We don’t carry stock, so the part is ordered to your kitchen. Call (888) 427-1810 for a free estimate and we’ll walk the tag with you.

Talk to Us Before You Buy the Wrong Part

If your PGT kitchen needs a part matched or a full remodel done right, call Barrett & Sons Construction Lancaster at (888) 427-1810 for a free estimate. We pull the permits, put every allowance and price change in writing, and stand behind the work with the 90-Day Done Right Promise. A live person answers the phone, seven days a week. Ask for the free second opinion on any written estimate, and know the 10% Senior & Veteran discount is standing.

Written by the team at Barrett & Sons Construction Lancaster, serving Lancaster and nearby areas.

Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 427-1810
Local Service Coverage

Request a Free Estimate in Lancaster

Tell us what you need - Barrett & Sons Construction Lancaster responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch