Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Driveway & Pavers: The Lancaster Owner’s Guide
If you have a Mr-Glass paver or driveway system on your Lancaster property that’s cracking, settling, or shedding its finish, we install and repair Mr-Glass-compatible driveway and paver materials and match replacements to your existing series. Installed replacement runs roughly $5,000 – $18,000 in Lancaster depending on square footage and whether we’re replacing the base or just the surface. We’re an independent contractor and not affiliated with Mr-Glass, but we’ve sourced and set these materials for years.
Most owners find out something’s wrong the same way: a paver lifts at a corner after a hot Antelope Valley summer, or a section of driveway settles and holds water after the first winter rain. The fix depends on whether the failure is in the paver itself, the sand joint, or the compacted base underneath. We look at all three before quoting a dollar figure.
Which Mr-Glass Models This Applies To
Mr-Glass has made pavers and driveway surfaces across several product series, and the material specs shift between them. The single most common compatibility mistake we see in Lancaster is ordering a replacement paver from a big-box pallet assuming “gray 4×8” is a universal size. It isn’t. Mr-Glass series differ in thickness (60mm pavers won’t match a 50mm bed without adjusting the base), edge profile, and the surface texture finish. A paver that’s 2mm off in height shows a lip you’ll trip on for years.
Here’s how to identify what you have before you call anyone:
- Check the underside of a loose or lifted paver – many Mr-Glass pieces carry a mold stamp or series code.
- Measure thickness and width at the flat face, not the rounded edge, with a tape or calipers. Note it to the millimeter.
- Photograph the surface texture close up in daylight. Finish matching is where generic replacements fail visually even when dimensions line up.
On the OEM-versus-aftermarket question: for pavers, a quality aftermarket piece that matches spec is a legitimate choice – the material is stone or concrete, not a proprietary mechanism. What matters is thickness, edge, and finish match, not the brand stamped on it. Barrett & Sons Construction works with Belgard and Techo-Bloc hardscape lines alongside Mr-Glass-compatible materials, so you can look up what’s going in your yard rather than taking a mystery brand off a pallet.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Mr-Glass Driveway & Pavers Is Failing
Not every problem is a failing paver. Some are a failing base, and replacing pavers on a bad base just buys you the same failure in two years. These are the symptoms we see most in Lancaster:
- Pavers lifting or rocking at the corners. Usually sand-joint loss or a base that wasn’t compacted to depth. Walking on a rocking paver worsens it.
- Sections settling and holding water. In Lancaster’s soil, this often points to inadequate base preparation or drainage that was never graded away from the slab.
- Surface spalling or flaking from heat and freeze cycles. Antelope Valley summers plus occasional hard winter freezes stress concrete pavers over time. A paver that’s flaking wasn’t a defective piece – it’s the climate catching up.
- Weeds pushing up through joints. Almost always failed sand joints, not weeds being weeds.
- Driveway edges crumbling or separating from the apron. Edge restraint failure lets the whole field spread outward.
The lifespan reality in this part of California: a properly based paver surface holds up for decades, but a thin base installed quickly can show settling within a few years. When we quote, we tell you which failure you have so you’re not paying to redo a surface over a problem underneath.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s what driveway and paver work runs in Lancaster, and what’s in the number. Every scope and allowance arrives in writing before we start, and every price change arrives as a written change order before work moves.
| Job | Installed Range |
|---|---|
| Paver driveway installation | $7,000 – $18,000 |
| Paver patio installation | $3,500 – $11,000 |
| Concrete driveway installation | $4,500 – $12,000 |
| Asphalt driveway paving | $3,500 – $9,000 |
| Driveway replacement (full) | $5,000 – $14,000 |
| Driveway sealing | $250 – $700 |
The range is driven by square footage, thickness of the compacted base, whether old material has to be hauled off, and edge restraint or drainage work. The price includes the material, the base prep, the labor, closeout, and cleanup. It also includes the 90-Day Done Right Promise – if it’s not done right, Tom comes back and makes it right on one call. Not every job needs a permit; when one does, we pull it and get it signed off.
DIY or Call Us?
There’s real value in knowing what you have before you spend a dime. You can safely pull a loose paver, measure it, photograph the finish, and note whether water pools after rain. That information makes our quote sharper and faster.
What doesn’t go well as a weekend job is resetting a field of settled pavers on a rebuilt base. Homeowners who try it in Lancaster usually get the top layer flat and skip the compaction, or skip the edge restraint, and the surface spreads within a season. Base prep is the whole game, and you can’t fake it with a hand tamper. The other DIY trap is buying a mismatched replacement paver to fill one hole – it never sits right.
Call (888) 427-1810 and we’ll tell you straight whether you’re looking at a repair or a replacement, and what it costs. No trip charge inside the county, and a free second opinion on any written estimate you already have.
FAQs
A properly based installation holds up for decades; the pavers themselves rarely fail before the base or the sand joints do. In Antelope Valley heat and freeze, surface wear shows on thin-base installations first. If yours is flaking or settling, call (888) 427-1810 for a look before it spreads.
Often yes. A few lifted pavers with intact material can be reset with fresh base and sand joint. Whole fields that have settled or shed their finish usually mean a replacement. We tell you which before you commit to either – free second opinion on any estimate you have.
A paver patio or small driveway section is typically a few days; a full driveway replacement with base rebuild runs longer, often a week or more depending on square footage and haul-off. We give you the timeline in writing with the scope.
We match by measured thickness, width, edge profile, and finish photograph, and source through Belgard and Techo-Bloc hardscape lines or a matching Mr-Glass series where one fits. You get to look up the material before it goes down. Call (888) 427-1810 to start.
Other brands we also service: KraftMaid, Cambria, and Silestone.
Call (888) 427-1810 for a free estimate on your Mr-Glass driveway or paver project in Lancaster. We’ll walk the property, tell you exactly what’s failing, and put the scope and price in writing before anything moves.
Written by the team at Barrett & Sons Construction Lancaster, serving Lancaster and nearby areas.