A Barrett company - serving Lancaster, CA

IKO Windows & Doors in Lancaster, CA

Windows & doorsWindows & doors
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

IKO Windows & Doors: The Lancaster Owner’s Guide

We install and replace IKO windows and doors across Lancaster, and most full window replacement jobs run $4,500 – $15,000 depending on count and glazing, while impact-rated units land at $8,000 – $25,000. A single failed sash, hinge, or weatherstrip repair is a smaller job. Owners usually find the failure the same way: a window that won’t latch in July, a door that drags on the threshold after a hot week, condensation fogging between panes, or a draft they can feel across the living room in January. Barrett & Sons Construction Lancaster is an independent installer and is not affiliated with IKO.

Call (888) 427-1810

Which IKO Models This Applies To

IKO is best known in Lancaster for its roofing underlayments and shingles, so the first thing we do on a “my IKO window” call is confirm what the homeowner actually has. Some owners are looking at a window or door label that reads IKO on a component sticker, and some are matching a part to a distributor’s line card. Before we quote anything, we read the glass spacer label and the manufacturer’s data plate on the jamb, if one survives. Those carry the series, the date of manufacture, and the glass package, which is what lets us match a replacement sash or operator correctly instead of guessing from a photo.

The practical compatibility rule: match by series and by measured opening, never by sight. Two IKO-labeled units from different production runs can share a look and carry different sash balances or hinge offsets. We measure the rough opening, the visible glass, the frame depth, and the hinge side. OEM parts give an exact fit but can carry a lead time. A quality aftermarket sash or hardware set often installs the same day and holds up just as long, and we’ll tell you which way makes sense for your unit rather than defaulting to the expensive one.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your IKO Windows & Doors Is Failing

  • Condensation or fog between the panes. The sealed glass unit has lost its seal, and no amount of wiping will fix it. In Lancaster’s dry summer heat and cool desert nights, that daily swing stresses seals faster than a mild coastal climate would.
  • A door that drags or won’t latch. The hinge screws have worked loose, or the frame has shifted with the seasonal ground movement we see across the Antelope Valley. Left alone, the misalignment wears the weatherstrip and the lock strike.
  • Drafts or visible daylight at the frame. The weatherstrip has flattened or pulled away. This is usually the cheapest failure to fix and the biggest one to ignore, because it shows up on your energy bill before it shows up as a visible gap.
  • Difficulty opening or a sash that won’t stay up. The balance or operator has failed. A window stuck open is a security problem in a way a stuck window isn’t.
  • Water staining on the interior sill or drywall. The flashing or the seal at the frame has failed, and water is getting behind the unit. This one needs a look before the next rain, because the damage spreads into the wall.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Here’s what window and door work runs in Lancaster, installed, with the line items written out before we start.

Job Installed Range
Window replacement (full unit) $4,500 – $15,000
Impact window installation $8,000 – $25,000

The range is driven by count, glass package, frame material, and whether the trim and flashing need rework. Every quote is line-item: parts, labor, disposal, and any trim allowance, all in writing. Any price change arrives as a written change order before the work proceeds. Every eligible job gets permits pulled and inspections signed, and the completed work is backed by our 90-Day Done Right Promise: if it’s not done right, we come back and make it right.

DIY or Call Us?

You can safely check a few things yourself. Look for fog between the panes, feel for drafts around the frame, and try every latch and lock. Tighten a loose hinge screw and see whether the door lines up. If it does, you may have solved it.

Where DIY goes wrong is the glass and the frame. Replacing a sealed unit or resetting a window in the opening means handling heavy glass, getting the flashing right, and knowing when the frame itself has shifted. A window that leaks because the flashing was wrong is a bigger repair than the one you started with. If the sill is wet or the frame is out of square, that’s the point to call. Reach us at (888) 427-1810 and we’ll tell you honestly whether it’s a repair or a replacement.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 427-1810
Local Service Coverage

Request a Free Estimate in Lancaster

Tell us what you need - Barrett & Sons Construction Lancaster responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch