Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CWS Driveway & Pavers: The Lancaster Owner’s Guide
We install and service CWS-compatible driveway and paver systems across Lancaster, and a paver driveway here typically runs $7,000 to $18,000 installed depending on square footage, base prep, and whether we’re replacing or starting fresh. A concrete driveway runs $4,500 to $12,000, so we can quote both and let you compare on paper before you decide. We’re an independent provider and not affiliated with CWS.
Owners usually discover a failing driveway the same way: a low spot holds water after a rain, or an angled crack opens up across a slab. On pavers, sand shifting and weed growth along the joints signal the base is giving way underneath. In Lancaster’s high-desert climate, the daily swing between hot afternoons and cool nights works on every joint and seam, so what looks like a cosmetic crack is often the first sign of a deeper problem.
Key Takeaways
- Paver driveway installation in Lancaster: $7,000 – $18,000. Concrete: $4,500 – $12,000. Replacement: $5,000 – $14,000.
- Premature failure in Lancaster’s climate usually traces to base depth and compaction, not the pavers themselves.
- We pull permits where required and back every job with our written 90-Day Done Right Promise.
- Call (888) 427-1810 for a free estimate.
Which CWS Models This Applies To
Driveway and paver systems under the CWS line vary by series, and the right spec depends on how your home is laid out and how your driveway drains. The usual products in this category are interlocking concrete pavers, permeable paver systems, and concrete slab sections. Identifying the right match comes down to a few labels and measurements. Check the manufacturer stamp or edge marking on a loose paver; most CWS pavers carry a brand mark, series name, and dimension on the side or underside. If you can’t find a mark, measure the face dimensions and joint width. Standard pavers are usually in the 60mm to 80mm thickness range for driveways, while thinner units are meant for patios and walkways. Matching the exact CWS series matters because base depth, joint sand, and edge restraint are spec’d to that unit.
On the OEM-versus-aftermarket question: for CWS pavers where a specific color, profile, or series is no longer in production, a quality aftermarket paver of the same dimensions and thickness will perform the same if the base and edging are correct. We’re upfront about when an exact CWS match isn’t available so you can decide before we order anything. We don’t keep stock or carry parts on a truck; we source what your driveway actually needs.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your CWS Driveway or Paver System Is Failing
- Spiderweb cracks or angled cracks across a slab. These usually come from settling soil underneath or a base that wasn’t compacted deeply enough. In Lancaster, expansive soils and fast drainage after dry spells let that base shift.
- Pavers rocking or sinking in one area. A single rocking paver often means the bedding sand eroded locally. Several rocking together point to a deeper base or drainage problem.
- Sand washing out of the joints. Joint sand should stay put. When it rinses away with each rain, edge restraints are likely failing or the grading is pushing water across the pavers instead of off them.
- Weeds in the joints and along the edges. Persistent weed growth means the joints have opened up, usually from settlement or missing joint sand, which lets the subgrade move.
- Puddling or standing water after a storm. Water pooling on the surface means the slope has flattened out or the base has settled. Standing water speeds up damage to pavers and concrete alike, and that’s a drainage fix, not a cosmetic one.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s what driveway work runs in Lancaster, installed:
| Service | Installed Price Range |
|---|---|
| Paver Driveway Installation | $7,000 – $18,000 |
| Concrete Driveway Installation | $4,500 – $12,000 |
| Asphalt Driveway Paving | $3,500 – $9,000 |
| Driveway Replacement | $5,000 – $14,000 |
| Driveway Sealing | $250 – $700 |
| Paver Patio Installation | $3,500 – $11,000 |
What moves the number up or down: square footage, how much old material has to be removed and hauled, base depth, grading, drainage corrections, and whether permits or HOA approvals apply. We quote the parts and labor as separate line items so you can see where the money goes. Every price change comes to you as a written change order before the work moves forward. All of it is backed by our written 90-Day Done Right Promise.
DIY or Call Us?
A few things you can safely check yourself. Walk the driveway and note every rocking or cracked unit. Look at how water flows after a rain and whether it drains away from the house. Pull a loose paver and look for the manufacturer stamp. Dig a small test hole at the edge to see how deep the base gravel goes. Those checks help you understand what you’re facing.
Where DIY goes wrong on driveways is the base. It’s the part no one sees and the reason most driveways fail early. Base depth, compaction, and edge restraint are what hold the whole surface together, and getting them right is slow, physical work. Replacing a whole driveway or correcting grade is not a homeowner job. We’re happy to look at your situation and tell you honestly whether it’s a repair or a replacement. Call (888) 427-1810 to schedule your free estimate.
FAQs
A properly installed paver driveway should give you decades of service. In Lancaster’s climate, the pavers themselves wear well; the base and edge restraints are what determine lifespan. Get those right and the surface holds. Call (888) 427-1810 for an exact quote on your driveway.
Often yes. Localized damage can sometimes be lifted, re-based, and reset, and a failing single section doesn’t always mean a full replacement. If the base has settled across the whole drive, replacement is usually the better money. Our free second opinion on any written estimate can help you compare.
A repair job is typically a day or two, while a full driveway replacement usually runs a week or more depending on size, removal, and base work. We’ll give you a realistic timeline in writing before we start.
We match your existing CWS paver by series, dimensions, and thickness, then order from the manufacturer or a quality aftermarket equivalent when an exact match isn’t available. We’re not affiliated with CWS and don’t carry parts on a truck; we source what your driveway needs.
Some driveway work in Lancaster requires a permit, and we pull permits and get inspections signed on every eligible job. We’ll tell you what applies to your address before work begins.
When a driveway or paver system starts to fail, you want a clear answer on what’s wrong and what it costs, not a sales pitch. We’ve been doing this since 1998, we put our name on every job, and we’ll look you in the eye and tell you the truth. Barrett & Sons Construction Lancaster serves Lancaster and the nearby communities across the Antelope Valley, and every job is backed by our 90-Day Done Right Promise. Ask around, or look up the license yourself.
Call (888) 427-1810 today to schedule your free estimate. We also service KraftMaid, Cambria, and Silestone materials on the kitchen and bath side when a driveway project turns into a bigger update.
Written by the team at Barrett & Sons Construction Lancaster, serving Lancaster and nearby areas.