Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Windows & Doors: The Lancaster Owner’s Guide
We install and repair CGI-compatible windows and doors for Lancaster homeowners, with full window replacement typically running $4,500 – $15,000 and impact-rated units $8,000 – $25,000 installed. Single-component fixes like a failed lock, hinge, roller, or weatherstripping often land far below that, and we can usually get a crew out within a day or two for a repair call. Most owners discover the problem the same way: a window that won’t latch going into a windy Lancaster evening, a patio door that drags on the track, or a seal that fogs between the panes after a summer of triple-digit heat.
Which CGI Models This Applies To
CGI makes a wide range of vinyl and aluminum products sold through builder and retail channels across the Antelope Valley, and the part you need depends on which line you have. Before you order anything, find the manufacturer’s label in the window frame’s top or side channel (also on the door slab edge or the operator housing for patio doors). That label carries the model and series number, the glass package code, and the original install date. Take a photo of it. If the label is gone, measure the visible glass width and height, the frame depth, and the sash thickness to the sixteenth of an inch, because CGI parts are not interchangeable across series lines and a part that fits one model will not fit another.
On the OEM-versus-aftermarket question: CGI-branded replacement parts are the cleanest match, but for common wear items like sash locks, tilt latches, rollers, and screen corners, quality aftermarket parts from established hardware makers fit correctly and cost less. For anything structural (a sash, an IG unit, a door slab), stay with OEM-spec. We’re an independent contractor and not affiliated with CGI, so we’ll tell you honestly which route makes sense for your window rather than pushing a brand.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your CGI Windows & Doors Is Failing
- Fogging or condensation between the panes. The insulated glass seal has failed, letting moisture into the air space. In Lancaster’s heat-and-cold swings this usually happens 8 – 15 years in, and the glass unit needs replacing, not just the frame.
- A window that won’t latch or lock. The sash lock, keeper, or tilt latch has worn or the sash has shifted out of square. A worn lock is a quick swap; a shifted sash points to a bigger alignment problem.
- Dragging or sticking patio door. The rollers are flat-spotted or the track is packed with grit and dust, common after a windy season. New rollers and a cleaned track restore smooth travel in most cases.
- Drafts or whistling around the frame. Failed weatherstripping, a worn sweep, or a shrinking gasket is letting Antelope Valley wind straight through. This is a seal problem, not always a whole-window problem.
- Water staining or soft wood at the sill. The exterior sealant or flashing has failed and moisture is getting behind the frame. Catch this early and it’s a reseal; ignore it and it becomes a frame or rough-opening repair.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s how the numbers break down for Lancaster, using standard market pricing:
| Job | Installed Range |
|---|---|
| Window replacement (per project) | $4,500 – $15,000 |
| Impact-rated window installation | $8,000 – $25,000 |
| Single-part repair (lock, roller, seal, sweep) | Quoted line-item, priced at the part plus labor |
What drives the range: how many openings, the glass package (standard versus impact-rated or Low-E), frame material, and whether the rough opening needs work. We quote parts and labor as separate line items so you can see exactly where the money goes. Every price change is a written change order before work starts, and the finished job is covered by our written 90-Day Done Right Promise.
DIY or Call Us?
Some of this you can safely check yourself: confirm the model label, clean and lubricate a patio door track, test whether a lock is simply loose or actually broken, and look for daylight around a closed sash. Where homeowners get into trouble is prying a sealed glass unit out of a sash, forcing a shifted sash back into square, or trying to re-flash a leaking frame from the outside, all of which can crack glass, void the window’s warranty, or let water in where it didn’t before.
Windows and doors aren’t a high-voltage or high-tension job, but a dropped sash or a mis-flashed frame is an expensive mistake. If you’re not sure which category your issue falls into, call (888) 427-1810 and we’ll tell you straight whether it’s a twenty-minute fix or a real repair.
FAQs
Expect 20 – 30 years for the window itself, but the insulated glass seal is the first thing to go, often at 8 – 15 years in our heat. Hardware like locks and rollers typically lasts 10 – 15 years before it starts sticking or failing.
Often yes. A fogged glass unit, a worn lock, a flat-spotted roller, or failed weatherstripping can usually be repaired without touching the whole window. If the frame itself is cracked or rotted at the sill, replacement is the honest answer.
A single hardware or seal repair is typically an hour or two. A full window replacement for a few openings is usually a one-day job, and larger projects run longer depending on how many openings and whether the rough opening needs work.
We start with the manufacturer label on your frame to pull the exact model and series, then match the part to spec. If the label is missing, we measure the glass, frame, and sash to confirm the fit before ordering. Call (888) 427-1810 for a free estimate and we’ll sort out exactly what your window needs.
If your CGI windows or doors are giving you trouble in Lancaster, don’t guess at the part. Call Barrett & Sons Construction Lancaster at (888) 427-1810 for a free estimate, with upfront pricing, written change orders, and our 90-Day Done Right Promise behind every job. We also service KraftMaid, Cambria, and Silestone products across the trades we handle. Our crew members have up to 28 years of experience, and a live person answers the phone around the clock.
Written by the team at Barrett & Sons Construction Lancaster, serving Lancaster and nearby areas.