A Barrett company - serving Lancaster, CA

Bufftech Roofing in Lancaster, CA

RoofingRoofing
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Bufftech Roofing: The Lancaster Owner’s Guide

If you’re holding a cracked or chalky piece of Bufftech roofing trim, slate, or edge cap, we can match and install the correct replacement for your profile at a typical installed price of $400 to $1,800 for repair work, or $8,000 to $20,000 for a full roof replacement when the entire field has aged out. We source the part, pull the permit where required, and install it. You’ll usually hear from a real person the same business day you call; the work itself gets scheduled, not rushed.

Call (888) 427-1810

Owners in Lancaster tend to find the failure in one of two ways. Either a piece of edge trim has lifted or curled after a windy spring from the Antelope Valley’s gusts, or a slate or shake-style roofing tile has cracked and started letting water track under the field. Bufftech’s roofing line is a synthetic polymer built to look like slate, cedar shake, or standing-seam metal, and it holds up well, but the sun and wind out here are unkind to the seams and flashings around it.

Which Bufftech Models This Applies To

Bufftech makes several roofing profiles – most commonly a synthetic slate, a cedar shake replica, and an edge or trim line that goes with them. The challenge is that production runs differ year to year. A piece from a 2009 run may not color-match a 2016 run even if the model name is the same, so we don’t guess. We ask you to pull a piece of the failed roofing and read the markings on the back, along with a measurement of the exposed face and the thickness, which is usually between 3/8 and 5/8 of an inch depending on the profile.

Where the OEM part is available, we order it. Where it’s been discontinued along with the rest of its run, we match against a quality aftermarket equivalent in the correct profile and color family, then install a mock-up for your sign-off before any full section goes up. We’re an independent contractor, not affiliated with Bufftech – which means we can be honest when the OEM part is the right call and when it isn’t. If you’re also working with cabinets, countertops, or hardscape, you’ve probably run into the same issue with KraftMaid, Cambria, and Silestone: color and finish runs change, and the year matters. Roofing is no different.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Bufftech Roofing Is Failing

  • Chalky, faded surface and color shift. UV from Lancaster’s high-desert sun breaks down the polymer surface over roughly 15 to 20 years, leaving the top face dull and lighter than the original. It’s cosmetic until it isn’t – faded polymer loses flexibility.
  • Curled or lifted edges. The Antelope Valley’s spring wind events catch any seam that’s already weakened. If a corner lifts, water gets behind the piece and starts working at the fasteners underneath.
  • Cracks or chips at the fastener line. Polymer that’s been nailed too tight or driven through at the wrong angle cracks at the hole. That’s an installation issue, not material failure, and it’s common on roofs we’re called out to inspect in Lancaster.
  • Water staining on the sheathing beneath a row. Check the attic decking under the suspect section after a rain. A faint outline under a piece means that piece or its flashing isn’t doing its job.
  • Missing, brittle, or powdery edge trim and caps. The trim is thinner and takes more sun than the field. When it flakes or crumbles at the touch, it’s past the end of useful life even if the field looks fine.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

For Bufftech roofing work in Lancaster, expect $400 to $1,800 for a targeted repair of a failed piece, edge trim run, or small section, and $8,000 to $20,000 for a full roof replacement if the field is beyond patching. The range moves with roof pitch, the number of penetrations and flashings, whether the underlying sheathing is sound, and whether a permit and inspection are required. A repair over $200 can take $40 off with our standing offer, and if you’ve already got a written estimate from another outfit, bring it in for a free second opinion.

Every quote we hand you is line-item: material, labor, and any sheathing or flashing repair we expect to find under the failed section, all in writing before work starts. If we open it up and something changes, you get a written change order before we continue. No surprise invoices at the end. The workmanship on the install is covered by the 90-Day Done Right Promise.

DIY or Call Us?

You can safely check the basics without getting on the roof: read the model markings from a piece you can pull from the ground or from the attic side, measure the exposed face, and look at the sheathing beneath a suspect section for water staining. Anything at height – walking the roof, lifting a piece, reflashing, or working near a chimney or valley – is where we’d stop. A fall from a Lancaster roof at 55+ is a serious injury, and the polymer becomes slick and brittle in the heat.

Beyond the fall risk, the installation details on Bufftech roofing are unforgiving. Fasteners need to be driven in the correct zone with the right tension, and any flashing detail you get wrong at the coping, valley, or penetration is a slow leak that shows up months later. We do this work with crews that carry Barrett & Sons’ name, background-checked, and we pull the permit where eligible and get the inspection signed. Call (888) 427-1810 and we’ll match your part and quote the repair honestly.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 427-1810
Local Service Coverage

Request a Free Estimate in Lancaster

Tell us what you need - Barrett & Sons Construction Lancaster responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch