Bathroom remodeling
Kitchen remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Boxabl Bathroom Remodeling: The Lancaster Owner’s Guide
We remodel Boxabl bathrooms for Lancaster owners, and a full bathroom remodel typically runs $9,000 – $28,000 installed, with smaller refreshes landing nearer $5,000 – $12,000. Barrett & Sons Construction pulls the permits, signs the inspections, and puts every scope and allowance in writing before work starts. Most owners don’t call us because a part “broke” – they call because the factory shower pan is flexing, the vanity is separating from the wall, or the stock fixtures in a small Boxabl unit finally wear past the point where a patch makes sense.
Which Boxabl Models This Applies To
Boxabl’s Casita line, including the Generation 1 and 2 units most Lancaster buyers own, uses a single wet-wall bathroom built around a molded shower pan, a compact vanity, and factory plumbing rough-ins set at fixed dimensions. The trick is that Boxabl has revised bathroom dimensions across builds, so the shower pan and vanity specs from one production run don’t automatically match another. Before anyone orders a replacement, we measure the actual pan opening, the rough-in spacing, and the wall thickness on your unit – not the spec sheet from a brochure.
Every Boxabl bathroom component has a data plate or sticker, usually inside the vanity cabinet or behind the access panel on the wet wall. That label tells us the build series and lets us match parts correctly instead of guessing.
On the OEM-versus-aftermarket question: factory Boxabl bathroom parts are designed to fit the exact opening, but the aftermarket pool for these units is small and uneven. For the shower pan and vanity, a factory-fit part or a custom-fabricated equivalent is usually the safer choice. For faucets, trim, and lighting, a quality aftermarket brand – and we carry well-known names like KraftMaid, Cambria, and Silestone for cabinetry and countertops – outlasts the stock pieces and looks better doing it.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Boxabl Bathroom Remodeling Is Failing
- The shower pan flexes or rocks underfoot. That soft spot means the foam or fiberglass pan has lost its support, usually from a cracked underlayment. Left alone, it turns into a hidden leak that shows up on the floor months later.
- Caulk lines crack and re-crack after each re-caulk. A Boxabl unit on a permanent foundation in Lancaster’s heat cycles through constant expansion and contraction. Repeated caulk failure points to a joint that’s actually moving.
- The vanity pulls away from the wall. Lightweight factory cabinets can separate when the anchor points loosen. This is a mounting problem, not a cosmetic one.
- Water stains or soft drywall below the shower. This is the big one. A failed pan seal or a shower valve leak that drips behind the wall shows up as a stain or soft spot on the other side.
- The stock faucet or shower valve drips or won’t hold temperature. Common after years of hard water. A rebuild kit fixes some, but a valve past its service life is worth replacing before it fails completely.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
In Lancaster, a full Boxabl bathroom remodel runs $9,000 – $28,000. A small bathroom remodel lands at $5,000 – $12,000. Individual pieces break out this way: a walk-in shower installation is $4,500 – $12,000, a tub-to-shower conversion is $3,500 – $10,000, a shower replacement is $3,000 – $8,500, and a vanity installation is $800 – $3,000.
The range depends on what’s behind the wall. A straight shower pan swap sits near the low end; a full remodel with new tile, a rebuilt valve, and a custom vanity climbs toward the top. Every scope, allowance, and price change arrives as a written change order before the work happens. That means no surprise invoice at the end. Our crew members bring up to 28 years of experience, permits are pulled and inspections signed on every eligible job, and the work is backed by our written 90-Day Done Right Promise.
DIY or Call Us?
You can safely check a few things yourself. Look for soft spots in the shower floor, cracks in the caulk, stains on the wall behind the shower, and drips at the faucet. Write down what you find and take photos. That’s useful for any contractor.
Where DIY goes wrong on a Boxabl bathroom is the plumbing and the wall work. Shower valves, supply lines, and drain connections are unforgiving, and a small leak behind a wall can rot framing before you notice it. Chasing a leak that started at a failed shower pan seal is rarely a weekend job. If you’re not comfortable shutting the water off and opening the wall, this is the point to call. Call (888) 427-1810 for a free estimate – a live person answers around the clock, and we’ll tell you honestly whether you’re looking at a repair or a remodel.
FAQs
Most Boxabl bathroom components hold up 10 – 15 years with normal use, and the shower pan is usually the first thing to go. In Lancaster’s dry heat, caulk and seals degrade faster than in cooler climates, so sealing every few years stretches the life of the whole bathroom. If your unit is past that window and showing more than one failure, a remodel usually costs less than chasing repairs one at a time. Call (888) 427-1810 for an exact quote – estimates are free.
Often yes, and we’ll tell you when a repair is the right call. A dripping faucet, a loosened vanity, or cracked caulk is usually a simple fix. A cracked shower pan or a valve that’s failed internally usually isn’t – patching those often costs more over a few years than replacing them once. We’ll give you both numbers and let you decide. Call us for a free second opinion on any written estimate you’ve already received.
A single fixture swap, like a vanity or faucet, is usually done in a day. A full Boxabl bathroom remodel in Lancaster takes about one to three weeks, depending on tile, plumbing changes, and inspection timing. Permits and inspections are built into that schedule, not tacked on at the end. Call (888) 427-1810 and we’ll give you a realistic timeline during the estimate.
We identify your Boxabl build series from the data plate, measure the actual opening, then match to a factory-fit component or a quality aftermarket equivalent. We’re an independent contractor and not affiliated with Boxabl, so we’re not limited to one supplier and we tell you honestly what fits. You get the brand and part number in writing before we order. Call (888) 427-1810 to get started.
Written by the team at Barrett & Sons Construction Lancaster, serving Lancaster and nearby areas.