A Barrett company - serving Lancaster, CA

Boral Roofing in Lancaster, CA

RoofingRoofing
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Boral Roofing: The Lancaster Owner’s Guide

We install and repair Boral clay and concrete tile roofing across Lancaster and the Antelope Valley. A full Boral roof replacement here typically runs $8,000 – $20,000, individual tile and underlayment repairs run $400 – $1,800, and our technicians have up to 28 years of experience reading what failed and why. When Boral tile goes bad in Lancaster, owners usually spot it three ways: a tile in the front yard after a wind event, a dark stain spreading across the ceiling in the hallway, or a neighbor pointing at a balding spot on the roof you can’t see from the ground. Our estimates are free and written line-item, so you know what’s parts and what’s labor before anyone climbs up.

Call (888) 427-1810

We’re an independent service provider. We’re not affiliated with Boral, and we don’t stock Boral parts or carry them on a truck. What we do is match the right tile, underlayment and flashing to what’s actually on your roof, pull the permit when the job calls for one, and back the work with our written 90-Day Done Right Promise.

Key Takeaways

  • Boral makes clay and concrete roof tile plus trim and accessory pieces; Lancaster’s heat, wind and sun are hard on all of it.
  • Installed replacement for a Boral roof in Lancaster: $8,000 – $20,000; single repairs: $400 – $1,800.
  • The most common Lancaster failure isn’t the tile. It’s the underlayment underneath it, cooked out by 100°F summers.
  • We pull the permit and get the inspection signed on every eligible job.
Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Which Boral Models This Applies To

Boral’s tile line is broad, and the differences matter when you’re matching a repair. The two big families are clay tile and concrete tile. On the clay side, Boral’s flat, barrel and S-profile lines are the ones you’ll see on Lancaster roofs. On the concrete side, Boral’s flat concrete tile, its low-profile profiles and its trim and accessory pieces (hip and ridge tiles, field trim, gable ends) each have their own dimensions, and getting the size wrong by half an inch means a tile that rocks, chips or leaks at the overlap.

How to identify what’s on your roof without guessing:

  • Look at the underside of a loose tile or a scrap piece. Boral pieces usually carry a stamp or molded mark on the backside, and a photo of that stamp is worth more than any description.
  • Measure the tile’s exposed width and length. Two tiles that look identical from ten feet away can differ a quarter-inch, and that quarter-inch is the whole job.
  • Note the color and texture. Boral has discontinued and reformulated many colorways over the years; a match isn’t always possible, and we tell you that up front.

On the OEM-versus-aftermarket question: for a small repair where the tile is hidden from street view, a quality aftermarket match from a manufacturer that makes the same profile is a reasonable call and saves money. For anything visible from the front of the house, or for a large section, matching the actual Boral profile is worth the search. We don’t have a parts warehouse and can’t promise we have your tile sitting on a shelf. What we do is source it through our material suppliers and show you the sample before it goes up so there are no surprises on the roof.

Signs Your Boral Roofing Is Failing

Boral tile is a long-lived product, but Lancaster is not a forgiving climate. Here’s what we actually see, and what’s usually behind it.

  • Broken or slipped tiles. Antelope Valley wind events lift and crack tile, especially at hips and ridges where the fastening is weakest. If you find pieces in the flowerbed after a windstorm, the fastening or the trim piece is the culprit, not the field tile.
  • Dark ceiling stains after a rain. In Lancaster this almost always traces to the underlayment, not the tile. Concrete tile over failed underlayment is one of the most common leaks we repair here, and no amount of tile replacement fixes it.
  • Granule loss and chalky streaks. Lancaster’s sun bleaches and wears the surface of concrete tile faster than coastal climates. Chalky runoff on the walls and gutters is a sign of surface wear.
  • Lifted or cracked flashing. Flashing around vents, valleys and skylights is where water gets in. Wind and thermal cycling here work on it every season.
  • Sagging or soft spots under the tile. A soft deck or sagging sheathing points to long-term moisture, which is a bigger job than a tile repair. We look for this in Lancaster because the heat hides it until it’s serious.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Here are the Lancaster numbers we quote, and what’s behind them.

Work Typical Installed Range in Lancaster
Roof repair (tile, flashing, small leak) $400 – $1,800
Tile roof repair $600 – $2,500
Full roof replacement $8,000 – $20,000

The range is driven by how much tile is being replaced, whether the underlayment is getting redone, how much flashing and trim is involved, and how accessible the roof is. Permits and inspection add to the bill on jobs that need them, and we pull them, because the permit inspector works for you, not for us. We give you a written line-item quote showing parts and labor separately, and if the scope changes once we’re on the roof, you get a written change order before anything moves. Every completed job carries our written 90-Day Done Right Promise: if it’s not right, one call brings us back.

DIY or Call Us?

There’s plenty you can safely check yourself. Walk the yard after wind and look for broken or slipped tiles, note any ceiling stains after rain, and photograph the backside stamp of a loose tile so we can identify the model. What goes wrong on DIY roof tile work in Lancaster is stepping on the roof, walking on brittle concrete tile, and cracking three tiles to replace one. Working on a pitched roof is genuinely dangerous, and tile is slippery even when dry. We’d rather you stay off it. Call (888) 427-1810 and we’ll look at it with you, free of charge, and tell you honestly whether it’s a repair, a re-underlayment, or a replacement. While we’re out, we can talk through KraftMaid, Cambria and Silestone if the kitchen’s on your list too.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 427-1810
Local Service Coverage

Request a Free Estimate in Lancaster

Tell us what you need - Barrett & Sons Construction Lancaster responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch