A Barrett company - serving Lancaster, CA

Boral Driveway & Pavers in Lancaster, CA

Driveway & paversDriveway & pavers
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Boral Driveway & Pavers: The Lancaster Owner’s Guide

We install Boral-compatible driveway and paver work across Lancaster, and a full paver driveway typically runs $7,000 – $18,000 installed, while patios land at $3,500 – $11,000. If your Boral pavers are cracking, sinking, heaving, or losing their joint sand after a Mojave winter, we can look at it and tell you honestly whether it’s a repair or a re-lay. We’re an independent contractor and not affiliated with Boral.

Call (888) 427-1810

Most Lancaster owners figure out something’s wrong the same way: a hairline crack widens over one summer, a corner of the driveway drops an inch after the first hard rain, or the sand between the pavers washes out and stays gone. Boral makes good clay and concrete pavers, but no paver fails on its own – what fails is what’s under it, or how it was locked in place. That distinction is the whole conversation.

Which Boral Models This Applies To

Boral’s hardscape line covers a few families Lancaster homeowners run into: clay brick pavers (their long-standing product), concrete pavers under the Brighton and other architectural lines, and large-format slabs. The compatibility gotcha most people miss is thickness and joint width. Boral clay brick pavers are commonly 2 1/4 inches thick, while many concrete paver lines run 2 3/8 to 2 3/4 inches. If you’re patching or extending an existing Boral run, a paver that’s a fraction thicker or thinner will telegraph at the surface within one season – the new ones sit proud and catch a tire, or sit low and pool water.

To identify what you have, pull one loose paver (or the one already cracked) and measure it edge to edge: length, width, and thickness. Look for a stamp or mold mark on the bottom. Boral pavers often carry a manufacturer imprint, and photos of the bottom plus a tape measure reading get you a match faster than anything else. On OEM-versus-aftermarket: for a spot repair, a matching Boral paver in the same color and dimension is worth chasing because dye lots vary and a mismatched patch stays visible. For a whole new driveway, a quality paver from another line is perfectly fine – the base prep and edge restraint matter far more than the logo on the bottom. We also handle KraftMaid, Cambria, and Silestone on the interior side if a project grows into the house.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Boral Driveway & Pavers Is Failing

  • Cracks that run paver to paver. Often a base that wasn’t compacted in lifts, or a paver laid over a soft spot. Here in the Antelope Valley, expansive clay soil and summer heat cycling punish a shallow base fast.
  • Sunken or heaved sections. Water is getting under the pavers and the subgrade is moving. In Lancaster, a driveway that slopes toward the house is the one to watch after a winter storm.
  • Joint sand washing out. Missing sand lets pavers shift and weeds root. It can be as simple as re-sanding, or as deep as a failed edge restraint letting the field spread.
  • Loose or rocking pavers. The bedding layer has degraded or the base never reached density. A single rocker usually means its neighbors are next.
  • Efflorescence and staining that won’t scrub out. White mineral bloom is common on clay brick in dry climates; persistent staining can point to water trapped under the surface, not just on it.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Paver driveway installation in Lancaster runs $7,000 – $18,000; a paver patio sits at $3,500 – $11,000. A straight driveway replacement – tear out and re-lay – lands at $5,000 – $14,000. If you’re comparing against other surfaces, concrete driveway installation is $4,500 – $12,000 and asphalt paving is $3,500 – $9,000, though neither has pavers’ repair-by-the-piece advantage.

What drives the range: square footage, how much base has to come out and be rebuilt, edge restraint and drainage work, and whether you’re patching into existing Boral pavers or laying fresh. We quote parts and labor as separate line items so you can see where the money goes. Every scope and price change arrives as a written change order before work starts. The work is backed by our written 90-Day Done Right Promise.

DIY or Call Us?

You can safely check a lot of this yourself: measure the pavers, note where cracks and sunken spots are, watch how water drains after a rain, and take photos. Re-sanding joints on a sound driveway is a reasonable weekend job.

Where it goes wrong is base. Rebuilding a failed base means excavating, grading, compacting in proper lifts, and re-setting edge restraint – done shallow, a “fixed” driveway fails again in a season, and on a slope toward the house you can push water where you don’t want it. A paver driveway is heavy work with real injury risk if you’re lifting pallets and slabs solo. If the field is shifting, call us at (888) 427-1810 and we’ll tell you straight whether it’s a repair or a re-lay.

FAQs

How long do Boral pavers last in Lancaster? A properly installed Boral paver driveway should hold up 25 to 30 years or more. The pavers themselves rarely fail; the base, drainage, and joint sand decide the lifespan, and Lancaster’s heat and clay soil make base prep the make-or-break step.

Can it be repaired instead of replaced? Often yes. Cracked or loose pavers can be lifted and replaced, and washed-out joints can be re-sanded. If the whole field is shifting or heaving, that’s a base problem and a repair won’t hold. Call (888) 427-1810 for a free look.

How long does the work take? A spot repair is usually a day. A full driveway replacement typically runs three to six days depending on square footage and how much base has to be rebuilt – we’ll give you a realistic schedule in writing, not one that changes on you at the end.

How do you source the matching Boral paver? We measure and photograph the existing paver, check for the mold mark, and match dimension, thickness, color, and dye lot before ordering. We’re independent from Boral, so we buy the right product for your job – we don’t carry stock and won’t pretend a mismatched paver will blend in.

Call (888) 427-1810 to schedule your free estimate. We answer with a live person around the clock, give you a no-hassle upfront price, pull the permits on every eligible job, and you’re always welcome to take our written estimate and get a free second opinion on any other bid.

Written by the team at Barrett & Sons Construction Lancaster, serving Lancaster and nearby areas.

Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 427-1810
Local Service Coverage

Request a Free Estimate in Lancaster

Tell us what you need - Barrett & Sons Construction Lancaster responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch