Home additions & ADU
Kitchen remodeling
Bathroom remodeling
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Belgard Home Additions & ADU: The Lancaster Owner’s Guide
We build Belgard-compatible home additions and ADUs in Lancaster in the $45,000-$130,000 range for additions and $90,000-$220,000 for a full ADU, and we pull the permits and sign the inspections on every eligible job. Belgard hardscape systems are the finish layer and outdoor living structure on a lot of these builds, and when a piece of that system fails, it usually shows up as a sinking walkway, a wall that leans, or an outdoor kitchen pier pulling away from the patio slab. Owners rarely notice until a trip hazard appears or a rider cracks. Then the question is always the same: can the Belgard component be matched, and what does it cost to put it right? Call (888) 427-1810 for a free estimate.
We are Barrett & Sons Construction, an independent Lancaster contractor. We’re not affiliated with Belgard and we don’t represent them. What we install on your addition or ADU is genuine Belgard product, sourced through licensed distribution, and we match it to the rest of the patio so the repair doesn’t read as a patch. Our technicians have up to 28 years of experience, and every completed job carries our written 90-Day Done Right Promise.
Key Takeaways
- Additions run $45,000-$130,000; ADUs run $90,000-$220,000. Belgard hardscape components are priced into the scope, not tacked on later.
- Belgard paver and wall systems are matched by series and colorway, not by eyeballing the size at the home center.
- High-desert freeze-thaw in Lancaster is the number one destroyer of a hardscape joint, base, or jointing sand over a decade.
- We pull permits and issue written change orders before any scope change moves. No allowance surprises at the end.
Which Belgard Models This Applies To
Belgard isn’t one product. Your addition’s hardscape could be driven by any of several product families: the Dublin Cobble and Urbana Stone paver lines, the Mega-Lafitt and Belair Wall retaining systems, or the Catalina and Weston Stone slab lines used on outdoor kitchens and ADU entries. The paver series isn’t interchangeable. A 60mm Dublin Cobble won’t match a 70mm Mega-Lafitt on a failed edge course, and the colorways under each series are distinct. That’s the first compatibility gotcha: the product name on the bundle tag is what matters, not the color you see installed.
Here’s how to identify what you’ve got. Look at the underside of a loose paver if you can safely lift one, or the bundle slip left by the installer. The stamped markings on the pavers and the bundle tag will tell you the series. If your patio used a Techniseal or SRW jointing sand, that’s another clue about who installed it. When the tag is gone, we measure paver thickness and chat pattern and match against the Belgard catalog. That’s the difference between a repair that disappears and one that reads as a scar.
On the OEM-versus-aftermarket question: the honest answer for Belgard is that quality aftermarket pavers from Techo-Bloc or a comparable line are real products and can be a legitimate substitute when a Belgard series is discontinued. But if you’re matching into an existing Belgard field, an aftermarket paver of the same color name isn’t the same color. The base aggregate and the surface finish differ, and the two age differently. For a repair we try to source the actual Belgard series first. If that series is gone, we tell you that before you spend a dollar.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Belgard Home Additions & ADU Is Failing
Most of what we see in Lancaster ties back to the same three things: base prep, water, and the desert freeze-thaw swing. Here’s what to watch for.
- Sinking or rocking pavers near the ADU door. That’s almost always a base that wasn’t compacted deep enough or a downspout dumping water under the patio. The paver didn’t fail. The base under it did, and no surface fix corrects that.
- A retaining wall leaning out at the top. Belgard wall blocks hold up fine when the footer and drainage are right. When the wall leans, the drainage rock and weep points behind it have clogged, and water is pushing.
- White haze or crumbling joint sand. Our summer sun and winter nights that drop toward freezing will eat cheap jointing sand in a few seasons. Efflorescence is normal for a year; a crumbling joint that reappears every spring means the wrong sand or someone sealed it wet.
- An outdoor kitchen or pergola pier separating from the patio slab. The pier was set on the paving instead of a footing poured below frost line. Cracks travel up the column within two seasons.
- Mismatched color blotches on the paver field. That’s often a repair using the wrong series or colorway, or a lot variance the installer never blended. Blending from multiple bundles is a job, and skipping it is why the patch shows.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
What you’ll actually pay in Lancaster depends on which component failed and how deep the fix goes. Here’s how we bracket it.
| Scope | Installed Range |
|---|---|
| Patch and reset a failed paver section (5-25 sq ft) | $600-$2,200 |
| Rebuild base and reinstall a patio field (up to 300 sq ft) | $3,500-$11,000 |
| Retaining wall rebuild (per course, 3-6 courses) | $1,800-$6,500 |
| Belgard-compatible hardscape tied into a new addition | $45,000-$130,000 |
| Belgard-compatible hardscape tied into an ADU | $90,000-$220,000 |
What drives the range: the base depth (Lancaster lots need 4-6 inches of compacted class II, more if there’s organic soil), how much field has to be pulled to get a blended repair, whether a footing gets poured, and whether the existing wall blocks are still produced. Every line item is quoted in writing, and any scope change gets a written change order before we touch the job. The Belgard material, the joint sand, and the labor are all named on the quote. Our workmanship warranty covers the install itself, and our 90-Day Done Right Promise covers it in writing. Look up the license number yourself before you sign anything.
DIY or Call Us?
Here’s a straight split. You can safely pull a loose paver, stack it somewhere flat, and look for the bundle tag or stamping. You can photograph the failing area. You can check the downspouts and confirm where water runs off the ADU roof.
What you shouldn’t tackle: cutting into a Belgard field, lifting edge pavers with a pry bar over a retaining wall, or digging out a wall footer. Retaining wall and high course work is where DIY goes wrong. A loaded wall that isn’t properly rebuilt can fail inward or outward, and if someone is standing near it, that’s a serious injury. The blocks weigh a lot, the base has to be compacted in layers, and the drainage detail is not visible when you’re done. That’s the part most homeowners skip and the part that kills the repair.
Call us at (888) 427-1810 for a free estimate. We’ll tell you honestly if a repair is worth it or if the real answer is to rebuild the section, and the estimate is free. If you have a written estimate from anyone else, bring it, and we’ll give you a free second opinion on it.
FAQs
A properly installed Belgard system in Lancaster should last 20 to 30 years on the paver surface and longer on wall block, with the caveat that the base and drainage have to be right. The pavers themselves don’t fail first. The joint sand, the base compaction, and the drainage behind a wall do, and those are the items 90% of the “failed hardscape” calls trace back to.
In most cases yes, if the failing component is a specific section, joint, or edge course and the base under the rest of the field is sound. We probe the base and check for water migration first. If the base is the failure, a patch will fail again, and we’ll say so rather than take your money for a repair that won’t hold.
A small patch or reset is a single day, often a half day. A base rebuild on a section of patio is two to four days depending on depth and cure time. A wall rebuild can run three to five days. Larger work tied into an addition or ADU is scheduled as a phase of the project, not as a separate rush job.
We source Belgard product through licensed distribution and match your existing series, thickness, and colorway. We don’t stock parts and we don’t carry pavers on a truck; every order is placed to the job. If your series has been discontinued, we’ll tell you up front and walk you through the realistic alternatives. That includes Techo-Bloc or a comparable paver if it’s a good match, and we cross-reference the rest of the project’s materials – KraftMaid, Cambria, and Silestone on the interior; GAF and CertainTeed on the roof; Andersen and Marvin on the windows – so the hardscape ties into the whole build.
Barrett & Sons Construction Lancaster is owner-operated, we’ve been proud to serve Lancaster and the surrounding communities for over 29 years, and a live person answers the phone 24 hours a day, seven days a week. Our standing offers are on the table: $40 off any repair over $200, a free second opinion on any written estimate, no trip charge inside the county, and a permanent 10% senior and veteran discount. Call (888) 427-1810 to schedule your free estimate.
Written by the team at Barrett & Sons Construction Lancaster, serving Lancaster and nearby areas.