Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Barrette Kitchen Remodeling: The Lancaster Owner’s Guide
Barrette kitchen remodeling in Lancaster, CA runs $14,000 – $45,000 installed, depends on whether you’re matching a discontinued Barrette cabinet box or replacing it outright, and we quote everything in writing before any work is scheduled. Barrette made cabinet and millwork lines that turn up in a lot of Lancaster homes built in the 1990s and 2000s, and when a door fails or a box sags, homeowners usually find out the same way: a drawer front that won’t sit flush anymore, a hinge that rips out of the stile, or a cabinet box that has started to separate at the corner. Our technicians have up to 28 years of experience matching that hardware and can tell you fast whether it’s a repair, a match, or a replacement.
Which Barrette Kitchen Remodeling Models This Applies To
Barrette cabinets don’t carry one universal model number on the face. The identification lives inside the cabinet: pull a drawer and check the back of the drawer box, the inside of the cabinet side panel, or the sticker behind the door hinge for a series name or production code. Measure the box depth, the stile and rail width, and the door overlay before you order anything. Barrette used more than one hinge pattern across its lines, and an older face-frame box with a 3/8-inch overlay won’t accept hardware built for a full-overlay European hinge. That mismatch is the most common reason a “drop-in” Barrette replacement part doesn’t fit.
On the OEM-versus-aftermarket question, here’s our straight answer: if a Barrette door or drawer front is still available, match it exactly. If it isn’t, a quality aftermarket door in the same species and profile will look right and cost less, but you need the finish to match the rest of the kitchen, not just the sample chip. Lancaster’s dry desert heat and low humidity age a finish differently than the coast does, so a door that matches on paper can read two shades off after a season. We handle that matching for homeowners because getting it wrong is expensive.
Barrett & Sons Construction Lancaster is an independent service provider and is not affiliated with Barrette.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Barrette Kitchen Remodeling Is Failing
- Hinge screws pulling out of the stile. Cabinet wood in a Lancaster kitchen dries and shrinks over years of low humidity, opening the screw holes. Once the screws won’t hold, the door sags and starts to bind.
- A door that won’t stay closed or won’t sit flush. Usually a failed hinge or a warped door, not a latch problem. Barrette doors built on particleboard cores can swell at the bottom edge if they’ve seen a slow leak under the sink.
- Drawer boxes separating at the joint. The glue line fails before the wood does. A loaded drawer starts to rack, and the front pulls away from the side.
- Cracks along a cabinet seam or at a corner. Heat cycling in a Lancaster kitchen, especially near an oven, stresses the joint. A hairline crack today becomes a loose box next year.
- Finish checking or peeling on a face frame. Sun through a west-facing window is hard on older finishes. Once the topcoat fails, moisture gets into the wood underneath.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s what kitchen work in Lancaster actually costs, based on the job you’re facing:
| Work | Installed Price Range |
|---|---|
| Kitchen remodel (full) | $14,000 – $45,000 |
| Small kitchen remodel | $9,000 – $20,000 |
| Cabinet installation | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Backsplash installation | $800 – $2,500 |
| Kitchen island installation | $3,000 – $10,000 |
The range moves with cabinet size and count, door profile, whether the countertop and backsplash come out because the boxes change, and whether any plumbing or electrical has to move. What’s included in every Barrett & Sons job is the same: the labor, the materials we specify, permits pulled where the work requires it, and the written 90-Day Done Right Promise on the completed work. If a scope change comes up mid-job, you get a written change order before anyone touches it. No invoice at the end with surprises on it.
DIY or Call Us?
Some things you can safely check yourself. Measure your cabinet depth and overlay, snap a photo of the sticker inside the cabinet, and confirm which door fails and how. Tightening a loose hinge screw with a longer screw is fine if the hole still has wood to bite. What goes wrong for homeowners is guessing at the match, ordering a door that doesn’t fit the hinge pattern, or trying to repair a swollen or separated box without addressing what caused it. If the failure traces to water under the sink or heat near a range, replacing the part alone just postpones the same call in two years. Call us at (888) 427-1810 and we’ll tell you honestly which side of that line you’re on.
FAQs
Expect 15 to 25 years for a door or drawer box in a Lancaster kitchen, and less if the cabinets sit near a west-facing window or a heat source. The desert climate here is the main factor. Low humidity and high summer heat dry the wood and stress the joints, so hinges and glue lines fail earlier than they would in a coastal climate. Call (888) 427-1810 for a free estimate if yours are past that window.
Often yes, if the box is sound and only one door, hinge, or drawer is failing. We can match a replacement door or drawer front to the existing finish in many cases, or repair the box and reuse the rest. If the boxes are swollen, separated, or the finish is failing across the whole run, replacement is usually cheaper over time than patching piece by piece. Call (888) 427-1810 and we’ll give you an honest answer on which makes more sense.
A single door or drawer replacement is typically a same-day job, while a full kitchen cabinet replacement runs one to three weeks depending on the size of the kitchen and whether countertops and backsplash are involved. We quote the schedule up front and pull permits for any work that requires inspections. Call (888) 427-1810 to schedule your free estimate.
We start by identifying the series and hinge pattern from the cabinet itself, then check whether a matching OEM part is still in circulation before recommending an aftermarket equivalent with a close finish match. We don’t carry stock parts on a truck and we won’t promise a drop-in without verifying the pattern first. Call (888) 427-1810 for a free estimate and we’ll walk you through what’s actually available.
Barrett & Sons Construction Lancaster has been locally owned since 1998, and Tom Barrett and his sons are on-site most days. We install KraftMaid, Cambria, and Silestone when the right answer is a new kitchen rather than a repair. Our standing offers include $40 Off Any Repair Over $200, a Free Second Opinion on Any Written Estimate, No Trip Charge Inside the County, and a permanent 10% Senior & Veteran discount. Calls are answered by a live person 24/7. Call (888) 427-1810 for your free estimate.
Written by the team at Barrett & Sons Construction Lancaster, serving Lancaster and nearby areas.