A Barrett company - serving Lancaster, CA

Barrette Home Additions & ADU in Lancaster, CA

Home additions & ADUHome additions & ADU
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Barrette Home Additions & ADU: The Lancaster Owner’s Guide

We build and finish Barrette home additions and ADUs here in Lancaster, with installed projects typically landing between $45,000 and $130,000 depending on square footage, foundation work, and how much of the interior you finish out. If you have a Barrette addition shell, framing package, or ADU kit sitting on your lot and something has gone wrong with it, we can match the right part to your model and tell you honestly what a fix will cost. For most owners, trouble shows up the same way: a wall that reads out of square, a header or connector that’s loosened, a moisture stain creeping along a sole plate after a monsoon-season rain, or a door that stopped closing true because the addition settled a fraction of an inch.

Call (888) 427-1810

Which Barrette Models This Applies To

Barrette doesn’t stamp a single “addition” part number on everything it ships. What you actually have is a package pulled from their structural lines: connectors, framing hardware, and engineered components, each with its own series and load rating. The fastest way to identify the right replacement is to find the original paperwork or the stamp on the part itself. Look for the manufacturer mark, the gauge (most structural connectors run 16- to 12-gauge), and a model code on the hardware. On Barrette fasteners and connectors that code is usually stamped right into the metal, not printed on a sticker that the Antelope Valley sun has baked off.

One compatibility gotcha most homeowners miss: Barrette’s connector hardware is specified to a load rating, and a “looks the same” part from a bin at the box store often isn’t. A 16-gauge joist hanger and a 12-gauge hanger can look identical side by side but carry very different capacities, and using the lighter one on a loaded beam is where DIY jobs fail inspection. When you’re choosing between OEM and aftermarket, the safe rule is this: match the stamp exactly, or don’t substitute. On exposed fasteners and hangers, the coastal and desert-grade coatings Barrette specifies matter too, because standard galvanizing doesn’t hold up the same way out here. We’re an independent service provider, not affiliated with Barrette, but we’ve handled enough of their components to know which substitutions pass and which get flagged.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Barrette Home Additions & ADU Is Failing

  • Hairline cracks at ceiling or drywall corners. This usually means the addition is moving relative to the main house, often from a connector that’s loosened or a footing that’s shifting. Small cracks that grow over months are the ones to watch.
  • Doors and windows that stick or won’t latch. When a door suddenly drags on one corner, the framing has settled or twisted. It’s rarely the door’s fault; the structure under it moved.
  • Water staining along the sole plate or under a wall. Lancaster’s quick, heavy summer rain events find bad flashing and gaps fast. A stain that reappears after each storm means water is still getting in.
  • Rust or corrosion on visible connectors and fasteners. Standard hardware can’t take decades of dry heat and UV. Corroded straps or hangers have lost holding power and need replacing, not painting.
  • A slope or dip in the floor you can feel underfoot. A soft or springy section in an addition floor often points to a joist, hanger, or subfloor issue. Left alone, it gets worse and gets expensive.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

For Barrette home addition and ADU work in Lancaster, plan on $45,000 to $130,000 for a full installed project, and expect smaller structural repairs and part replacements to run well under that. What drives the high end is square footage, foundation and footing work, and interior finish level. A modest structural repair – matching a connector, correcting a settled joist, re-flashing a leak – is a fraction of a full build. Parts and labor are quoted separately and in writing, so you see what the hardware costs versus the labor to install it. Every eligible job gets permits pulled and inspections signed, and the finished work carries our written 90-Day Done Right Promise: if it isn’t right, Tom comes back and makes it right. Our crew members have up to 28 years of experience, and we hold a 10% senior and veteran discount that applies here.

DIY or Call Us?

Some things you can check yourself safely: look for the model stamp on a loose connector, take photos of a crack or a water stain, measure a door gap, note whether a floor feels soft. That information helps us quote accurately over the phone. What you shouldn’t tackle alone is structural work – re-hanging a loaded beam, replacing a joist hanger under load, or correcting a settled footing. These carry real risk of a structural failure or a failed inspection, and a wrong connector can be worse than the one that broke. This isn’t a scare tactic; it’s just that the load on an addition is heavy and unforgiving. When a fix touches the structure, that’s the point to bring in hands that will pull the permit and sign the inspection. We answer the phone with a live person 24 hours a day, so call (888) 427-1810 and describe what you’re seeing.

FAQs

How long should Barrette connectors and framing hardware last? Quality structural hardware should last the life of the structure, but in Lancaster’s heat, dry air, and UV, exposed standard-galvanized parts can corrode in a decade or two. Matching the right coating to the exposure is what gets you a full lifespan. Call (888) 427-1810 for an exact quote – estimates are free.

Can it be repaired instead of replaced? Often, yes. A loosened connector, a single corroded hanger, or a localized flashing leak can frequently be corrected without tearing into the whole addition. Whether repair beats replacement depends on how much the structure has moved. We’ll tell you straight which one makes sense. Call (888) 427-1810 – the estimate is free.

How long does the swap take? A single part or connector replacement is typically a short job, usually wrapped up in a day or two once the right part is in hand. Larger structural corrections take longer depending on the permit and inspection schedule. Call (888) 427-1810 and we’ll give you a realistic timeline.

How do you source the correct Barrette part? We match by the model stamp, gauge, and load rating on your existing part, and confirm the substitution against what your addition actually needs – not just what looks close on a shelf. When you also need cabinetry or counters in the finished space, we work with KraftMaid, Cambria, and Silestone as well. Call (888) 427-1810 to start with a free estimate.

Barrett & Sons Construction Lancaster is your neighbor-operated choice for Barrette home additions and ADU work in Lancaster, and we tell you the price, the scope, and the change orders in writing before anything moves. Founded in 1998 and owner-operated by Tom Barrett, we pull permits, sign inspections, and back every completed job with our written 90-Day Done Right Promise. Call (888) 427-1810 for a free estimate – a live person answers, day or night. There’s no trip charge inside the county, and we’ll happily give a free second opinion on any written estimate you already have.

Written by the team at Barrett & Sons Construction Lancaster, serving Lancaster and nearby areas.

Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 427-1810
Local Service Coverage

Request a Free Estimate in Lancaster

Tell us what you need - Barrett & Sons Construction Lancaster responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch