A Barrett company - serving Lancaster, CA

ActiveYards Driveway & Pavers in Lancaster, CA

Driveway & paversDriveway & pavers
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

ActiveYards Driveway & Pavers: The Lancaster Owner’s Guide

Barrett & Sons Construction Lancaster installs ActiveYards-compatible driveway and paver systems across Lancaster, with hardscape installation typically running $7,000 – $18,000 for a paver driveway, $3,500 – $11,000 for a paver patio, and $250 – $700 for driveway sealing. Pavers, edge restraints, and drainage components can often be repaired or replaced without tearing out the whole drive, and our crew members have up to 28 years of experience matching parts to the ActiveYards series you already have. We are an independent service provider and are not affiliated with ActiveYards.

Call (888) 427-1810

Most Lancaster owners don’t discover a paver failure all at once. It starts with a low spot holding water after a winter rain, a corner paver that rocks when the car rolls over it, or a joint line that opens up and lets sand wash out. By the time a paver actually cracks or sinks, the bedding layer or edge restraint underneath has usually been moving for a season or two already.

Key Takeaways

  • Paver driveway installation in Lancaster runs $7,000 – $18,000 installed; smaller repairs and part swaps cost far less.
  • ActiveYards uses several paver thicknesses and joint widths, so the part must match your series – not just the color.
  • Our crew members have up to 28 years of experience, and every price change arrives in writing before work starts.
  • We publish our name, address, and license number so you can verify us before you sign anything.

Which ActiveYards Models This Applies To

ActiveYards hardscape products come in more than one format, and the part you need depends on which one you have. The lineup includes traditional pavers, larger-format slabs, retaining wall block, and edge restraints, and each format carries its own thickness and joint tolerance. A 2 3/8-inch paver and a thickened 3 1/8-inch version look identical from the street but don’t swap cleanly – the coping course, edge restraint height, and bedding depth all change with the thicker unit. That’s the compatibility gotcha most homeowners hit first.

To identify your part, start at the damaged paver or edge piece. Look along the exposed face of the paver for a stamped mark, then measure the actual thickness with a tape – don’t trust the box label from a project that may have been done years ago. Measure the joint width between units too, since joint sand and poly sand are matched to the gap. If the run is a retaining wall, check the back of a loose cap for a molded series mark.

On the OEM vs aftermarket decision: for color-matched face pavers, an OEM ActiveYards unit is usually the right call so the new piece matches the existing patio’s fade and texture. For edge restraints, joint sand, and drainage grates, a quality aftermarket equivalent sized to your paver thickness works fine and keeps the budget honest. We order the part to your series, not a “close enough” color – the sun on a Lancaster driveway fades pavers unevenly, and a near-match shows within a month.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your ActiveYards Driveway & Pavers Is Failing

These are the symptoms we see most on Lancaster hardscapes, and each one points to a specific cause underneath:

  • Pavers rocking or springing under foot. The bedding sand has washed out or the base wasn’t compacted to depth. Rocking means the paver is unsupported and will crack next.
  • Low spots holding water after rain. Settlement in the base or a blocked drainage line. Standing water in Lancaster’s freeze-thaw winter cycle widens joints and speeds the failure.
  • Joint sand washing out along the driveway edge. A failing edge restraint – the plastic or aluminum curb that holds the run together. When it lifts, the whole perimeter spreads.
  • Hairline cracks spreading from a corner. Usually weight overload on a thin paver or a base that flexed. A single cracked paver is easy to swap; a cluster points to a base problem.
  • Sunken section near the garage apron or a downspout. Water funneling into one spot eroded the base. Left alone, the sink hole grows each rainy season.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

For Lancaster, the honest installed ranges look like this:

Work Installed Range
Full paver driveway installation $7,000 – $18,000
Paver patio installation $3,500 – $11,000
Driveway sealing $250 – $700
Driveway replacement $5,000 – $14,000

What pushes you toward the top of a range: total square footage, the depth of base excavation, whether an edge restraint needs full replacement, drainage correction, and the paver series you’re matching. Parts and labor are listed separately on the quote so you can see what the paver costs and what the install costs. Every completed job is backed by our written 90-Day Done Right Promise – if it’s not right, we come back and make it right on one call, and any price change on the job arrives as a written change order before work moves.

DIY or Call Us?

You can safely check a few things yourself: measure the paver thickness, note where water pools, and see whether the edge restraint is loose or lifted. Replacing a single face paver or topping off joint sand on a small patio is within reach for a handy homeowner with the right paver and a plate compactor.

What goes wrong with DIY is the base. A paver that was swapped without fixing the washed-out bedding or a lifted edge restraint will rock again within a season, and resetting an entire run on an un-compacted base is a job for equipment and experience, not a Saturday. We’d rather you call us for the base work and keep the simple swaps for yourself. Call (888) 427-1810 and we’ll walk through whether it’s a ten-minute fix or a full tear-out.

FAQs

How long do ActiveYards pavers last in Lancaster? A properly installed ActiveYards paver driveway typically lasts 25 to 30 years or more, with the base and edge restraint usually deciding the lifespan before the paver itself fails. Lancaster’s summer heat and winter freezes stress the joints, so yearly sealing helps – it runs $250 – $700. Call (888) 427-1810 for an exact quote; estimates are free.

Can a failing paver be repaired instead of replaced? Yes. A single cracked or sunken paver, joint sand top-off, and edge restraint repair are all fixable without tearing out the drive. Repair makes sense when the base is intact; if a whole section is settling, a partial rebuild is the honest answer. Call (888) 427-1810 and we’ll tell you which one you’re looking at.

How long does the swap take? A single-paver replacement is often done in an afternoon; resetting a bedded run or replacing an edge restraint on part of a driveway typically takes one to three days. Full driveway installation runs longer depending on square footage and base work. Call (888) 427-1810 to schedule a free on-site estimate.

How do you source the ActiveYards part? We identify your series from the paver stamp and thickness measurement, then order the matching unit through active hardscape suppliers so the color and dimensions line up. If an OEM piece is no longer made in your finish, we’ll say so and quote a quality aftermarket match in writing before any work begins. Call (888) 427-1810 for a free estimate.

Whether you still carry some KraftMaid cabinets from a kitchen project, Cambria or Silestone counters, or an ActiveYards hardscape that’s had a rough season in Lancaster, our crew members have up to 28 years of experience and handle every trade we touch. We pull permits and get inspections signed on every eligible job, and every price change comes in writing before it touches the work. Call (888) 427-1810 for a free estimate – a live person answers around the clock.

Written by the team at Barrett & Sons Construction Lancaster, serving Lancaster and nearby areas.

Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 427-1810
Local Service Coverage

Request a Free Estimate in Lancaster

Tell us what you need - Barrett & Sons Construction Lancaster responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch