A Barrett company - serving Lancaster, CA

Jerith Driveway & Pavers in Lancaster, CA

Driveway & paversDriveway & pavers
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Jerith Driveway & Pavers: The Lancaster Owner’s Guide

Jerith-compatible driveway and paver work in Lancaster generally runs $250 for resealing a small section up to $18,000 for a full paver driveway, and most repair visits are scheduled within a few days rather than same-day. We’re an independent contractor and not affiliated with Jerith, so we’ll tell you straight whether a replacement part still exists or whether the smarter money goes into new pavers. Owners usually find the problem the same way: a paver lifts at the apron after a windstorm, mortar joints crack along the driveway edge, or a cracked paver starts collecting water that never drains.

Call (888) 427-1810

Key Takeaways

  • Jerith driveway and paver components are matched by profile and series, not by eyeballing a photo.
  • Lancaster’s freeze-thaw swings and summer heat break down mortar and sealant faster than most coastal markets.
  • We’re independent from Jerith. Every price change comes to you in writing before we touch the driveway.
  • Permits get pulled and inspections signed on every eligible job. Paving over a bad base is the mistake we won’t make.

Which Jerith Models This Applies To

Jerith’s paver and border product lines break down by profile name and nominal thickness, and the fit is the whole game. A paver that sits an eighth of an inch too tall at the apron catches tires and rocks in the channel; a border piece that’s too thin won’t hold the joint line under a Lancaster summer sun. Before anyone quotes you, we read the label on the pallet tag or on the packing slip the original installer left behind. If the label is long gone, we measure the piece itself: length, width, thickness, and the chamfer profile at the edge. Those four numbers are almost always enough to match the series.

On the OEM-versus-aftermarket question, here’s how we decide. If Jerith still makes the profile, the OEM piece keeps the joint lines and the color batch. When a series has been retired, a quality aftermarket equivalent from a name like Belgard or Techo-Bloc will often work, but only if the thickness and the color family match closely enough that the patch doesn’t read as a scar. We tell you which path we’re taking and why before any order goes out. Nothing shows up as a surprise invoice at the end because nothing gets ordered without a written change order in your hand first. A pallet of pavers that doesn’t match is worse than no pallet at all, and you shouldn’t be the one eating that cost.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Jerith Driveway & Pavers Is Failing

  • A paver lifts or rocks at the apron. Usually a base failure, not the paver itself. Water got under the edge and froze, then thawed, and the sand bed underneath washed out.
  • Mortar joints crack in a straight line. That pattern means a joint material that was never rated for Lancaster’s temperature swing, or a joint that was laid too wide and dried unevenly. Both are fixable without tearing up the whole driveway.
  • Efflorescence, a white chalky haze, keeps returning. Salt and minerals are rising through the paver from moisture trapped in the base. A surface wash won’t stop it; the drainage has to be sorted out.
  • The sealant has gone cloudy or chalky. Lancaster’s summer UV cooks a cheap sealer in two to three seasons. Once it chalks, it has to be stripped before a new coat will bond, not just painted over.
  • A paver chips or cracks along a border. Heavy border pieces take the tire load. When one breaks, the pieces next to it start walking, and the driveway edge begins to spread.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Here’s what Jerith-compatible driveway and paver work runs in Lancaster, installed, with parts and labor broken out separately on your written estimate. You’ll see the price for the material line and the price for the labor line, not one blended number that hides the cost.

Scope Installed Price Range
Driveway sealing (Jerith paver section) $250 – $700
Paver repair or border reset (spot work) Quoted per job
Paver driveway installation $7,000 – $18,000
Paver patio installation $3,500 – $11,000
Concrete driveway installation (for comparison) $4,500 – $12,000
Full driveway replacement $5,000 – $14,000

The range moves on three things: how much base prep the ground needs, whether the match is OEM or a good aftermarket equivalent, and how much old material has to come out. What we won’t do is quote a spot patch and then bill you for a full tear-out. The 90-Day Done Right Promise is written on every contract. If a joint opens or a paver lifts inside the window, one call brings us back, no charge. A live person answers the phone around the clock.

DIY or Call Us?

You can safely do a few things yourself. A paver that rocks is one you can lift by hand and look at: check whether the sand under it is gone or the base is a soft spot. That tells you a lot. You can also hose off a cloudy section of sealant, wait for it to dry, and see whether the haze is surface dirt or a sealer that’s actually failed. And you can measure a border piece and write down the length, width, and thickness before you call anyone.

Where DIY goes wrong is the base. A paver that’s reset into a bad base will rock again by the next rainy season, and mortar joints done by anyone without the right joint material will re-crack in a hurry. Then a real repair costs more than it would have on the first visit, because now there’s failed work to undo. Paving is flat work, not high-risk work, but the time and the base are the parts that bite. Call (888) 427-1810 and we’ll come out, look at what you’ve got, and tell you honestly whether a repair will hold or not.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 427-1810
Local Service Coverage

Request a Free Estimate in Lancaster

Tell us what you need - Barrett & Sons Construction Lancaster responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch