Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Ameristar Kitchen Remodeling: The Lancaster Owner’s Guide
If your Ameristar kitchen is showing its age, a full kitchen remodel in Lancaster typically runs $14,000 – $45,000 installed, depending on cabinet layout, countertop material, and whether the floor plan changes. Smaller Ameristar kitchen refreshes (new cabinets and countertops, same footprint) land between $9,000 and $20,000. Cabinet installation alone runs $4,000 – $13,000; countertop installation $2,000 – $6,500; a new backsplash $800 – $2,500. We’re an independent contractor, not affiliated with Ameristar, and we install Ameristar-compatible cabinets, counters, and fixtures in Lancaster homes every month.
Most Ameristar owners in Lancaster discover they’ve hit the end of the road the same way: the cabinet doors won’t stay shut anymore, the countertop has a hairline crack near the sink that keeps spreading, or the drawer glides have worn out and the whole run feels loose. The finish on 1990s and early-2000s Ameristar cabinet lines chalks and peels in the Antelope Valley sun, especially on south-facing walls where afternoon UV does the most damage.
Key Takeaways
- Full Ameristar kitchen remodel in Lancaster: $14,000 – $45,000 installed
- Cabinet-only replacement: $4,000 – $13,000
- Permits pulled and inspections signed on every eligible job
- Every price change arrives as a written change order before work starts
- 90-Day Done Right Promise on every remodeling job
Which Ameristar Models This Applies To
Ameristar built a lot of kitchen cabinetry through the 1980s, 1990s, and early 2000s, and the parts we source for Lancaster remodels are matched by the model and series number stamped on the cabinet door or printed on a label inside the sink base cabinet door. If that label is gone, we measure the box opening, door overlay, and hinge pattern directly.
The compatibility gotcha: Ameristar used at least three different hinge boring patterns across its production runs – 35mm cup with 45mm or 48mm door-pilot spacing depending on the series. Ordering a replacement door or hinge without matching the boring pattern means a door that won’t sit flush. We verify door thickness (typically 3/4-inch), overlay (full or partial), and hinge cup depth before ordering anything.
For counters, Ameristar kitchen lines often routed backsplash tile directly to the underside of upper cabinets, which means a new counter with a taller backsplash won’t fit without trimming. We measure that clearance before quoting a countertop swap.
OEM vs. quality aftermarket for Ameristar cabinets is a real decision. OEM Ameristar doors in discontinued finishes often can’t be sourced; a well-matched aftermarket door from a brand like KraftMaid or a local mill house frequently costs less and lasts longer, since today’s finishes hold up better to Lancaster’s UV and dry air than the originals did. Where the original Ameristar finish is still available, we’ll tell you honestly whether it’s worth matching or replacing the whole run.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Ameristar Kitchen Remodeling Is Failing
- Doors won’t close flush or stay shut. Worn hinge cups, stripped screw holes in the cabinet box, or a hinge that’s been retightened one too many times. If you can see daylight through a closed door gap, the hinge plate has given up.
- Drawer glides stick, squeak, or pull out crooked. The nylon rollers and tracks on older Ameristar boxes wear into plastic-on-plastic grinding. Once a glide fails, the whole drawer run twists and puts stress on the box corners.
- Countertop hairline cracks near the sink, cooktop, or seams. Thermal cycling from Lancaster’s 40-degree-plus summer temperature swings and the dry air stress laminate and solid-surface seams. A crack that grows in a month is a sign of underlying movement, not just surface wear.
- Cabinet finish peeling, chalking, or lifting on sun-facing walls. UV from Lancaster’s high-altitude sun degrades the original lacquer or varnish on 1990s Ameristar doors faster than in coastal climates. If the finish feels chalky, it’s past the point of touch-up.
- Water stains or soft wood under the sink and around the dishwasher. Slow leaks from the supply line or dishwasher seal wash into the cabinet base and rot the particleboard from below. By the time the stain shows, the base often needs replacement, not just a new cabinet floor.
Replacement Cost & What’s Included
For a Lancaster Ameristar kitchen remodel, the installed price ranges below are typical, market-calibrated, and include demo, haul-away, installation, and finish work:
| Scope | Installed Price Range |
|---|---|
| Full kitchen remodel | $14,000 – $45,000 |
| Small kitchen remodel | $9,000 – $20,000 |
| Cabinet installation | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Backsplash installation | $800 – $2,500 |
| Kitchen island installation | $3,000 – $10,000 |
What drives the range: cabinet door style and material, countertop material (laminate on the low end, Cambria or Silestone quartz at the top), whether the island moves or the layout changes, and whether plumbing or electrical needs relocating. Every scope line and allowance is written on the contract before we start; if a change comes up mid-job, a written change order goes out before a single nail moves. We pull permits and sign inspections on every eligible Lancaster job.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
What you can safely check yourself: whether the hinge cup is cracked, whether a drawer glide is missing a roller, whether a countertop crack is growing (mark the end with tape and check in a week), and whether there’s active water under the sink (dry everything, watch for a bead of water at the supply fitting).
Where DIY goes wrong: swapping cabinet boxes that need to be plumb and level to the wall, reconnecting a sink and dishwasher that require code-compliant plumbing, and touching anything electrical if the remodel includes under-cabinet lighting or moving a cooktop circuit. We don’t give step-by-step instructions for that work – a licensed electrician handles panel and wiring, and an incorrect sink plumbing connection can flood a cabinet in a week.
If you’re unsure whether your Ameristar kitchen needs a door swap or a full remodel, call us at (888) 427-1810 for a free estimate. We’ll tell you honestly which one makes sense.
FAQs
Cabinet boxes typically last 25 – 35 years, but doors, hinges, glides, and countertop surfaces usually fail first, often by year 20. In Lancaster the dry air and high UV accelerate door finish failure and countertop seam movement, so we routinely see 1990s Ameristar kitchens that need new doors and counters long before the boxes are shot. Call (888) 427-1810 to schedule a free estimate.
Often yes – a single hinge, drawer glide, or door can be replaced without touching the rest of the kitchen. If the cabinet box is solid, we’ll repair rather than replace, and we’ll tell you up front which is the better value. If the finish or counter surface is failing across the whole run, a partial repair just delays the bigger job. Call (888) 427-1810 for a free second opinion on any written estimate you already have.
A cabinet-only replacement is usually 2 – 4 days on site; a full kitchen remodel with counters, backsplash, and island runs 2 – 4 weeks depending on material lead times and inspection scheduling. Permits and inspection windows on Lancaster jobs can add a few days. We give you a written schedule before work starts, and any timeline change comes in writing.
We identify the cabinet by model and series label or by direct measurement, then source from the original manufacturer where the part is still produced or from a matched aftermarket line (KraftMaid, Cambria, Silestone, and mill-house doors and counters). We don’t carry parts on a truck or in stock – every part is matched to your specific Ameristar model before it’s ordered, so it fits the first time.
Contact Barrett & Sons Construction Lancaster
If your Ameristar kitchen has reached the point where a repair is throwing good money after bad, or you’re just trying to figure out whether the doors and counters can be swapped without tearing out the whole room, call us at (888) 427-1810 for a free estimate. We’re an independent contractor, not affiliated with Ameristar, and we’ve been serving Lancaster and the surrounding Antelope Valley since 1998 – owner-operated, permits pulled and inspections signed, every price change in writing, and a 90-Day Done Right Promise written on every contract. Whether you’re in Quartz Hill, Palmdale, or right here in Lancaster, someone answers the phone 24 hours a day, 7 days a week.
Written by the team at Barrett & Sons Construction Lancaster, serving Lancaster and nearby areas.