Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Ameristar Fence Installation: The Lancaster Owner’s Guide
Ameristar aluminum fence installation in Lancaster typically runs $3,500 to $9,000 installed for a residential yard, depending on linear feet, grade changes, and whether you’re replacing a rusted steel fence with a fresh Ameristar line. An Ameristar system is aluminum, powder-coated, and built to hold up where vinyl sags and wood rots, which is exactly why so many Lancaster lots still run it.
Owners usually call us after they notice a leaning post at the corner, a gate that drags the ground, or panels that shift when the wind picks up out of the Antelope Valley in spring. Sometimes the powder coat has chalked and peeled after years of UV. We’re an independent installer, not affiliated with Ameristar, but we know the product line well and we’ll size the right system to your property. Call (888) 427-1810 for a free estimate.
Which Ameristar Models This Applies To
Ameristar builds aluminum fence in a few product families, and the most common residential tier is the Tuf-Guard series, followed by the heavier Rock Island and the ornamental Cascade and Bayview lines for a more decorative look. The part that matters most to match is the post and panel spacing: residential grades generally run 4-foot, 5-foot, or 6-foot heights, with pickets on roughly 3-3/4 inch on-center spacing in the standard grades. If you’re replacing or adding panels, measure the actual gap between posts after installation, not before – racked sections on a slope will read differently.
To identify your exact system, look at the top rail shape (flat versus a raised channel), the picket cap style, and whether the posts are riveted or screwed to the rails. The original sticker on a post may still be readable if it’s on the inside face.
The OEM-versus-aftermarket call on Ameristar is simple: match the manufacturer grade when you’re adding to an existing run so the powder coat color and profile line up. For a full replacement, a quality aluminum equivalent in the same color family will look identical from the street and can save money, but you’ll want to confirm the post spacing matches so the rails and pickets interlock. We’ll tell you which route makes sense for your fence, not just which one sells.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Ameristar Fence Installation Is Failing
An aluminum fence doesn’t rot, but the installation around it can fail. Here’s what Lancaster owners actually see:
- Posts leaning after a wet winter. Aluminum posts set in concrete pull loose when the concrete wasn’t deep enough for the soil. Here in Lancaster the ground can go from baked-hard to saturated fast, and a shallow footing loses grip.
- Gates that drag or won’t latch. That’s almost always a hinge or post settling out of plumb, not the gate frame itself. The gate is fine; the anchor point moved.
- Panels that rattle or shift in the wind. Loose rail brackets or missing picket retainers let the whole section flex. On an Ameristar system this usually means the self-tapping screws have backed out.
- Chalky, faded, or peeling powder coat. Years of high-desert UV and blowing dust wear the finish. Light chalking is cosmetic; peeling to bare metal means the coating failed and the aluminum is starting to oxidize.
- Rust at the welds or hardware. The aluminum body won’t rust, but cheap steel hinges, latches, and screws will. Rust streaks at the joints point to hardware that was never stainless.
If you’re seeing two or more of these, the fence is telling you the footings or hardware need attention before a panel drops.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
In Lancaster, a full Ameristar aluminum fence installation runs $3,500 to $9,000, and a handful of factors move that number:
| What drives the price | Rough range |
|---|---|
| Linear feet and fence height | Most of the total |
| Slope and grade changes (racking) | Adds labor and custom panels |
| Gate or gates | Adds to base |
| Old fence removal and haul-off | Adds to base |
| Extended runs or commercial grade | Toward the top of the range |
What’s included is the part that matters: posts set in properly sized footings, panels and gates mounted plumb, hardware in stainless where it counts, and the site cleaned up. We put the scope and every allowance in writing before we start, so nothing new shows up on the invoice at the end. If a change is needed mid-job, it comes to you as a written change order first.
Every eligible job gets permits pulled and inspections signed, and the finished work carries our written 90-Day Done Right Promise. If something’s off after we leave, one call brings us back. The same standard applies to the other brands we install on this property – KraftMaid, Cambria, and Silestone in the house, and the fence outside.
DIY or Call Us?
Some things you can check yourself. Walk the line and push on each post – if one rocks, the footing is loose. Check the gate hinges and latch for rust and play. Look at the picket retainers and rail screws to see if any have backed out. Those checks cost nothing and tell you how bad it is.
Where DIY goes wrong with an aluminum fence is the footings. Digging the right depth, mixing concrete, setting a post plumb, and getting the grade right so the panels rack without binding is harder than it looks, and a post that’s a half-inch off plumb will torque the whole run. You also can’t easily correct a bad footing without tearing out the section.
If you want it done once and done right, call us at (888) 427-1810 for a free estimate. We’ll tell you honestly whether your existing run can be repaired or needs replacing.
FAQs
An Ameristar aluminum fence typically lasts 20 to 30 years in Lancaster’s climate. The aluminum body won’t rust, and the powder coat holds up against UV and dust, though the finish can chalk after 10 to 15 years. Stainless hardware extends the life of hinges and latches significantly. Call (888) 427-1810 for a free estimate on your fence.
Often yes. Leaning posts can be re-set in new footings, and gates can be re-hung or have their hardware swapped. If only a section or two has failed, we can match the panels and repair it. We’ll tell you up front whether repair or replacement is the better call. Estimates are free – call (888) 427-1810.
A typical residential run in Lancaster takes one to three days, depending on linear feet, slope, and how many gates are involved. A straightforward level yard can sometimes finish in a single day. Set-in-concrete footings need cure time, which affects scheduling. Call (888) 427-1810 to schedule your free estimate.
We order Ameristar components to match your existing grade and color, and we confirm the post spacing and rail profile before the order goes in so the new pieces interlock with your run. You get the part number and the price in writing before we commit. Call (888) 427-1810 for an exact quote – estimates are free.
Ready to price your Ameristar fence in Lancaster? Call Barrett & Sons Construction Lancaster at (888) 427-1810 for a free estimate. We’re an owner-operated, independent installer, every eligible job gets permits pulled and inspections signed, every price change comes to you in writing before work starts, and the finished work is backed by our written 90-Day Done Right Promise. A live person answers the phone 24 hours a day, so call whenever it’s convenient and we’ll set up a time to walk your property.
Written by the team at Barrett & Sons Construction Lancaster, serving Lancaster and nearby areas.