A Barrett company - serving Lancaster, CA

Barrette Windows & Doors in Lancaster, CA

Windows & doorsWindows & doors
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Barrette Windows & Doors: The Lancaster Owner’s Guide

We install and replace Barrette windows and doors across Lancaster, and a full window replacement here typically runs $4,500 – $15,000 for a home, with impact-rated units in the $8,000 – $25,000 range. If you’re chasing a single failed component instead, that’s a much smaller job, and we’ll tell you straight which one you’re facing. The thing about Barrette is that it’s a brand of the Ply Gem family, and plenty of Lancaster owners with Barrette product have no idea who made it until something fails. The symptom usually shows up quietly: a window that won’t lock the way it used to, a door that drags against the jamb in July and clears in December, or fog between the panes that never goes away after a rain.

Call (888) 427-1810

Which Barrette Models This Applies To

Barrette makes both windows and doors, and the part that fails depends entirely on which product line you own. The giveaway is a small etched label or a manufacturer sticker in the window frame’s top or side channel, or on the hinge edge of a door slab. Pull that label, photograph it, and match the series number before you buy anything. Barrette’s windows overlap with the Ply Gem family of vinyl lines, and the hardware, sash balances, and screen frames are not interchangeable between product families. A balance from one series won’t slide into a sash channel sized for another. On the door side, Barrette storm and entry doors use their own hinge configurations, thresholds, and sweep sizes, and an off-brand sweep that “looks close” often leaks at the bottom corner within one season.

Here’s the OEM question for Barrette in particular: Barrette-branded parts are not stocked at the big-box stores, and a special-order OEM replacement can run two to three times the cost of a quality aftermarket equivalent. For things like sash balances, screen frames, sweeps, and weatherstrip, aftermarket parts that match the series and size work just as well and arrive faster. For a broken door lock, a proprietary hinge, or a full sash, OEM is usually the right call because the tolerances are tighter than they look.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Barrette Windows & Doors Is Failing

  • Fog or condensation between the panes. The insulated glass seal has failed and moisture is trapped inside the unit. No amount of wiping fixes this, because the breach is inside the sealed unit, not on the surface.
  • A sash that drifts down or slams shut. The counterbalance has lost tension or broken. On a double-hung window this is the most common failure, and it usually shows up years before the glass does.
  • A door that drags, sticks, or won’t latch in summer. In Lancaster’s dry heat, vinyl and wood-composite door slabs and jambs expand and contract hard between seasons. A drag in July that clears by fall is often a hinge or threshold issue, not a slab warp.
  • Daylight or a draft around the frame or threshold. Worn weatherstrip, a cracked sweep, or failed sealant lets hot Antelope Valley air and dust straight in. This one costs you on the power bill before you ever notice it by eye.
  • A screen that pops out of its channel or sags at the frame. The spline has shrunk or the frame corner has loosened. Cheap to fix, but it’s a sign the screen has been in the sun long enough that the other hardware may be aging too.

Replacement Cost & What’s Included

For a single part swap, most Lancaster jobs land well under a full window replacement. Glass unit replacement in an existing frame, sash balance replacement, screen rebuilds, door sweeps, and hinge work are the common small-ticket items, and we’ll quote them as line items so you see parts and labor separately. When the failure is actually the whole unit, a standard window replacement in Lancaster runs $4,500 – $15,000 depending on count and size, and impact-rated windows run $8,000 – $25,000. What drives the range: how many units, whether the frame is sound enough to keep, whether you’re going to impact glass, and access.

Every quote includes the part cost, the labor, and disposal, in writing, with no surprise line at the end. If the scope changes once we’re in the frame, you get a written change order before we touch anything else. The work carries our 90-Day Done Right Promise, so if something we installed fails or isn’t right, one call brings us back.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

DIY or Call Us?

What you can safely do yourself: check the label, confirm the series number, measure the sash or door slab in three places, photograph the failed part, and confirm whether a window still seals and locks. That’s all homework, and it makes the repair cheaper because we know exactly what to bring.

Where DIY goes wrong on windows and doors: yanking a sash balance out of a charged channel under tension, prying a glued-in insulated glass unit, or rehanging a heavy entry door slab alone. Those are the jobs that turn a small repair into a frame replacement. If your Barrette door or window is above a staircase, on a second story, or it’s a large entry door, don’t try to move it solo.

Call us at (888) 427-1810 with the label photo and a measurement, and we’ll tell you over the phone whether it’s a part swap or a bigger job.

FAQs

Contact

If your Barrette window or door has a failed part, don’t wait for it to cost you more. We’ll pull the label, match the part, and give you a written line-item quote with parts and labor shown separately. We’re proud to serve Lancaster and the surrounding Antelope Valley communities, and every eligible job includes permits pulled and inspections signed, backed by the 90-Day Done Right Promise. Standing offers apply too: $40 Off Any Repair Over $200, a Free Second Opinion on Any Written Estimate, and No Trip Charge inside the county. Call (888) 427-1810 for a free estimate.

Written by the team at Barrett & Sons Construction Lancaster, serving Lancaster and nearby areas.

Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 427-1810
Local Service Coverage

Request a Free Estimate in Lancaster

Tell us what you need - Barrett & Sons Construction Lancaster responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch