A Barrett company - serving Lancaster, CA
E

ES Windows Roofing in Lancaster, CA

RoofingRoofing
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

ES Windows Roofing: The Lancaster Owner’s Guide

ES-branded windows and roofing components are typically replaced as a complete assembly, and in Lancaster that runs $8,000-$20,000 for a full roof replacement, or $400-$1,800 for a targeted repair around a failed window-flashing or skylight interface. Most Lancaster owners discover the problem the same way: a brown ring on the ceiling after the first winter rain, or a window frame that rattles when the wind kicks up across the Antelope Valley. The roofline and the window opening share a water-and-air boundary, and that boundary is usually where the failure starts.

Call (888) 427-1810

Which ES Windows Models This Applies To

ES Windows built and supplied window and door assemblies for a long stretch of California residential construction, and the series lines most often seen in Lancaster homes are the vinyl single-hung and fixed-picture units from the mid-1990s through the mid-2000s. The trick to matching a part is reading the etch mark on the glass corner or the interior label on the frame. That label gives you the series code and the date stamp, and the date stamp matters more than most people realize: ES changed its head-flashing profile twice in that run, so a replacement flashing boot pulled for a 1998 unit will not seat correctly on a 2004 frame.

On the roofing side, what “ES Windows roofing” usually means is the flashing kit, the head-and-sill pan, and the sealant package that ties the window opening into the roof deck. Those parts are plain sheet metal and membrane in many cases, and a quality aftermarket equivalent from a local sheet metal shop is fine. The one piece worth holding out for the OEM profile is the sill pan; the aftermarket pans that are stamped “universal” for Lancaster installs often come up short on the interior return, which is exactly where the water gets in.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your ES Windows Roofing Is Failing

  • Water stain on the ceiling below a roof-window or skylight. The flashing boot has cracked or the sealant has let go. UV exposure in the high desert breaks down sealant faster than coastal climates, so a joint that looks fine in March can be open by July.
  • A window that rattles or whistles in the wind. The weatherstripping or the head flashing is loose. In Lancaster, the spring gusts off the foothills put real pressure on that joint, and a small gap gets bigger every season.
  • Condensation between the panes. The seal on the insulated glass unit has failed. That is a glass replacement, not a flashing job, and it needs to be sorted before the wood frame behind it starts to decay.
  • Peeling paint or soft wood at the window head. Water has been getting past the flashing for a while and soaking the framing. Soft wood means the repair has moved from a parts swap to a carpentry job.
  • Staining on the interior drywall at the window corner. The sill pan is undersized or the weep holes are plugged. Water that can’t drain out goes in.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Here is what the work runs in Lancaster, installed, with labor and materials spelled out before we start.

Job Installed range
Roof repair around a failed window flashing or skylight $400-$1,800
Roof replacement (full) $8,000-$20,000
Window replacement $4,500-$15,000
Impact window installation $8,000-$25,000
Tile roof repair $600-$2,500

The low end is a single flashing boot and a tube of sealant with a small patch of shingle around the opening. The high end is a full tear-off where the old flashing was the least of the problems. What moves the number: how much decking needs replacing, whether the window frame is sound, and whether we’re matching tile that’s still made or sourcing a discontinued profile. Every scope, allowance, and change order arrives in writing before a nail moves. Barrett & Sons Construction Lancaster backs the work with the written 90-Day Done Right Promise: if it’s not right, one call brings us back.

DIY or Call Us?

You can safely check the flashing with binoculars from the ground, run a hose against the window head for five minutes and watch for water inside, and confirm the label on the frame. What you should not do is climb out onto the roof, pry up shingles, or open up a head flashing on your own. A fall from a Lancaster roof is a hospital trip, and re-seating a flashing boot wrong lets the water find a new path in. Our technician crews have up to 28 years of experience on exactly this kind of joint. Background-checked, uniformed crew members, permits pulled on eligible work, and a live person answers the phone around the clock. Call (888) 427-1810 for a free estimate.

FAQs

How long does ES Windows roofing last? The flashing and sealants on a roof-window interface are the shortest-lived part of the assembly, and in Lancaster’s UV-and-heat climate expect 12-20 years before they need attention. Roofing around it lasts longer if the joint is maintained.

Can it be repaired instead of replaced? Often, yes. A single failed flashing boot or a resealed pan is a repair, and that runs $400-$1,800 in Lancaster. Call (888) 427-1810 for an exact quote – estimates are free.

How long does the swap take? A flashing repair is typically a one-day job. A window or roof-section replacement is scheduled work, not same-day, and we’ll give you the timeline in the written scope. Call (888) 427-1810.

How do you source the part? We read the series code and date stamp off the frame, then match it to the correct OEM profile or a quality aftermarket equivalent from a local supplier. Barrett & Sons Construction Lancaster is an independent contractor and not affiliated with ES Windows. We don’t stock parts on a truck; we source the right one for your model.

We also install premium brands across the trades we touch: KraftMaid, Cambria, and Silestone on interiors, GAF and CertainTeed on roofs, Andersen and Marvin on windows. Proudly serving local communities for over 29 years. Calls answered by a live person, 24 hours a day, 7 days a week. Current standing offers: $40 Off Any Repair Over $200, Free Second Opinion on Any Written Estimate, No Trip Charge Inside the County, and a permanent 10% Senior & Veteran discount.

Call (888) 427-1810 for a free estimate.

Written by the team at Barrett & Sons Construction Lancaster, serving Lancaster and nearby areas.

Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 427-1810
Local Service Coverage

Request a Free Estimate in Lancaster

Tell us what you need - Barrett & Sons Construction Lancaster responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch