Home additions & ADU
Kitchen remodeling
Bathroom remodeling
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Home Additions & ADU: The Lancaster Owner’s Guide
We build CGI-compatible home additions and ADUs in Lancaster, and a finished addition typically runs $45,000 – $130,000 depending on size, foundation work, and finish level. An ADU starts at $90,000 and can reach $220,000 if you’re adding a full second dwelling with its own kitchen and bath. Here’s the part most homeowners learn the hard way: the failure doesn’t show up in the framing. It shows up in the details. A hairline crack that keeps reappearing above a new doorway. A patio slab that’s dropped a half inch from the addition wall. Stucco that’s chalky and cracking after two summers of wind. Those are the signals that something in the shell, the foundation, or the tie-in wasn’t done to Lancaster’s conditions.
Which CGI Models This Applies To
CGI makes several lines of modular and panelized addition systems, and the one you have determines how the whole thing comes together. The most common we see in the Antelope Valley are the panelized wall systems and the modular room-addition kits. The first thing to check is the label on the panel edge or the stamped plate near the plate-line connection. That plate carries a model code and a series designation. Take a photo of it before you call anyone.
If the label is gone, measure the panel thickness and the stud spacing. Panelized systems typically use 2×4 or 2×6 studs at 16 or 24 inches on center. The spacing tells you which series you’re working with, and it matters because the connection hardware is matched to it.
The OEM-versus-aftermarket call for CGI is real. Original connection plates and brackets are engineered for the system’s load path. Aftermarket equivalents can work, but only if the gauge and hole pattern match exactly. A bracket that’s a quarter-inch off will torque the frame and show up as cracks six months later. We source OEM where the part is structural and quality aftermarket where it isn’t.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your CGI Home Additions & ADU Is Failing
Lancaster’s climate is hard on additions. The temperature swing between a July afternoon and a January night runs wide, and that expansion and contraction works every joint in the structure. Here’s what we see when something’s going wrong:
- Recurring hairline cracks above doorways or windows. This usually means the header connection has loosened or the panel joint is moving. It’s the frame telling you it’s not tied down the way it should be.
- Stucco that’s chalky, cracking, or separating at the panel seams. Lancaster’s wind and sun dry out stucco faster than coastal climates. When it pulls away at a panel joint, moisture gets in and the problem accelerates.
- A floor that’s out of level near the exterior wall. In the Antelope Valley, expansive clay soils move with the moisture cycle. If the addition’s footing wasn’t sized for that soil, you’ll feel a slope.
- Doors and windows that stick in summer and free in winter. This is the frame moving more than it should. A properly braced CGI system has some movement, but a door that won’t close for three months means something’s loose.
- Water staining at the tie-in between the addition and the original house. The flashing detail where the new roof meets the old wall is the most common failure point. If it’s staining, the flashing is wrong or was never finished.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For CGI home additions and ADUs in Lancaster, the numbers break down into three buckets: foundation and framing, the shell and finish, and the tie-in work. A smaller room addition in the $45,000 – $75,000 range is usually a straightforward tie-in with standard finishes. A full ADU in the $90,000 – $130,000 range includes a kitchenette, bath, and separate entrance. The upper end, up to $220,000, covers a larger footprint, upgraded systems, or difficult site work.
What drives the range: soil conditions and footing depth, roof pitch and tie-in complexity, whether you’re extending utilities, and finish level. We quote parts and labor separately so you can see what you’re paying for. Every price change comes as a written change order before the work happens. The work is backed by our 90-Day Done Right Promise, written on the contract.
DIY or Call Us?
You can safely check a few things yourself. Photograph the panel label. Note where the cracks are and whether they’ve widened since last year. Check the flashing at the roof tie-in with binoculars from the ground, not from a ladder. What you shouldn’t do is open a wall to “see what’s going on,” re-anchor a connection plate, or re-flash a roof tie-in. Those aren’t just repairs; they’re structural decisions, and a wrong call can compromise the load path. One honest paragraph: this is not a place to guess. Call (888) 427-1810 and we’ll tell you what we see.
FAQs
How long does a CGI addition last in Lancaster? A properly built and maintained CGI addition should last decades, but the shell and flashing need attention every 8 to 12 years in this climate. The frame doesn’t fail; the weather seals and stucco do.
Can I repair the part instead of replacing it? Sometimes. A flashing repair or a stucco patch is often enough. A cracked panel joint or a loose connection plate usually means replacement, not a patch.
How long does the swap take? A full addition replacement is a weeks-long project, not a day. A targeted repair to flashing or a connection can be done in a day or two.
How do you source the part? We match the model code from your panel label to the correct CGI series and order OEM where the part is structural. Call (888) 427-1810 for an exact quote. Estimates are free.
We’re Barrett & Sons Construction Lancaster, and we’re an independent builder, not affiliated with CGI. We’ve been doing this work since 1998, and our crew members have up to 28 years of experience. If you’ve got a CGI addition that’s showing its age, or you’re planning one, call (888) 427-1810 for a free estimate. We’ll bring a second opinion on any written estimate you’ve already got, and there’s no trip charge inside the county.
Written by the team at Barrett & Sons Construction Lancaster, serving Lancaster and nearby areas.