Home additions & ADU
Kitchen remodeling
Bathroom remodeling
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Boral Home Additions & ADU: The Lancaster Owner’s Guide
A Boral-compatible home addition or ADU install in Lancaster typically runs $45,000 – $130,000 for an addition and $90,000 – $220,000 for a full ADU, with garage conversions at $30,000 – $80,000. These are planned, permitted builds – not same-day work. There’s no rush on a project this size, and anyone who tells you otherwise is selling something.
Most Lancaster owners don’t discover a failing structure until it’s mid-build. We get called when a framing inspection fails, when a Boral-clad wall shows moisture intrusion a year in, or when a prior builder disappeared with a deposit and left unpermitted framing in a backyard. The pattern is almost always the same: no permit pulled, no scope in writing, no one accountable at the end. That’s where we come in – with the owner on site, every price change as a written change order before work moves ahead, and the permit inspector signing off on what we build.
One note up front: Barrett & Sons Construction Lancaster is an independent contractor. We’re not affiliated with Boral, and we don’t claim any special access they don’t give every builder. We install to spec, source through standard channels, and stand behind the work with our own 90-Day Done Right Promise.
Which Boral Models This Applies To
Boral material shows up in Lancaster projects two ways: exterior cladding (Boral TruExterior trim and siding, Boral Versetta Stone veneer panels) and Boral plaster and trim profiles inside. On the exterior, TruExterior is the one we see most – it’s dimensionally stable and holds up in our high-desert swing between 100-degree summers and winter nights that dip to the mid-20s. Versetta Stone shows up on accent walls and column wraps on ADU fronts, where owners want the look of stone without the real-stone weight.
Identifying what you’ve got is the first job. Look at the back of any panel or the underside of trim for a stamp. Versetta Stone carries a mold mark and a series code. TruExterior trim ships with a piece number stamped on the hidden edge – mark it with a Sharpie and take a photo before you call anyone. Interior Boral plaster profiles are matched by bead type and depth, not model name, so a photo and a measurement are worth more than a part number that wears off in the field.
On the OEM question: for Boral cladding and trim, there is no aftermarket equivalent we trust. Substituting a generic fiber-cement for TruExterior changes the thermal expansion spec, and that’s exactly what causes the buckling and caulk-line cracking Lancaster builders fight in summer sun. Firm up the OEM part, and the fix holds.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Boral Home Additions & ADU Is Failing
Here’s what we hear from Lancaster homeowners when they call, and what’s usually underneath it:
- Caulk lines cracking or opening along panel joints every summer. UV-driven expansion and a wrong-compatibility sealant – the TruExterior moves, the caulk doesn’t, and the joint fails. A few years of that and water gets behind the exterior.
- Trim swelling, cupping, or peeling at the bottom edges. Ground-level splash-back from sprinklers combined with a missing flashing detail. The Boral trim often isn’t the problem – the water path behind it is.
- Visible white mold or dark streaks on the ADU wall face. Typically a failing WRB (weather-resistant barrier) or reversed panel lap. Skip the bleach and find the leak.
- Draft or daylight visible at a wall-to-roof joint on the addition. A framing or flashing error from the original build. Cosmetic patch won’t fix it.
- Creaking or a soft spot underfoot in the new floor. Undersized joists or a subfloor connection that’s failed. This one needs eyes on the framing, not a parts swap.
If two or more of those are showing on a Boral-trimmed Lancaster addition, the job is likely more than a part. Call us for a walk-through before doing anything else.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Barrett & Sons Construction Lancaster quotes every Boral-clad job as a written line-item estimate. Current Lancaster ranges:
| Job | Installed Range (Lancaster) |
|---|---|
| Panel or trim section replacement (Boral TruExterior / Versetta Stone) | $400 – $1,800 |
| Flashing & WRB repair, one wall face | $1,200 – $3,800 |
| Garage conversion to ADU | $30,000 – $80,000 |
| Home addition (Boral-clad exterior) | $45,000 – $130,000 |
| Full ADU, Boral exterior | $90,000 – $220,000 |
The range on a full build is driven by square footage, foundation work on Lancaster’s caliche-heavy soil, permit and inspection costs, and the finish level inside. Every scope, allowance, and price change arrives in writing before work happens – no end-of-job surprise invoices. We pull permits and pass inspections on every eligible project, and the work carries our 90-Day Done Right Promise. One call and Tom will be back if something’s not right.
DIY or Call Us?
A homeowner can safely check a few things: photograph the Boral stamp, measure panel and trim sections, walk the wall for soft spots, look for daylight at joints from inside, and note where water is showing. That’s documentation, not repair.
Where DIY goes wrong on a Boral-clad addition is in the weather barrier. Patching over a failing WRB without tearing back and re-flashing creates a hidden cavity where moisture sits – and in Lancaster’s monsoon-season splash-back, that cavity rots a wall in two or three years. Roof-to-wall flashing on an addition is the same story. This is not a job to learn on.
Also worth knowing: any work that touches the building envelope or adds habitable space needs a permit. Skip it and the next buyer’s inspector finds it. Call (888) 427-1810 for a free walk-through – the estimate costs nothing, and so does our second opinion on any written estimate you’ve gotten elsewhere.
FAQs
How long does a Boral exterior on a Lancaster home addition last? Boral TruExterior trim typically holds 30-plus years in Lancaster’s climate when it’s flashioned and sealed correctly at install. The failure you see at year five or six is almost never the material – it’s the sealant, the flashing, or the WRB behind it. Call (888) 427-1810 for an assessment.
Can a failing Boral wall or trim be repaired instead of replaced? Often yes. A cracked caulk joint, a popped trim section, or one failed panel can be repaired for a few hundred to a couple thousand dollars – much less than a full cladding replacement. If the WRB behind is compromised, that’s when the scope grows. Call (888) 427-1810 – estimates are free.
How long does a Boral panel or trim swap take? A single trim section or panel runs a day or two once the right Boral piece arrives. A wall face with flashing and WRB repair is typically three to five days. Full additions or ADU builds run weeks to months depending on scope and permit timing. Call (888) 427-1810 to talk through the job.
How does Barrett & Sons Construction Lancaster source Boral parts? We order through standard Boral distribution – no shortcuts, no warehouse stock claims, no parts on a truck. When Boral has a longer lead time, we tell you the honest date, not the hoped-for one. That’s how the job stays predictable from the first estimate to the last inspection. Call (888) 427-1810 to start a free estimate.
Barrett & Sons Construction Lancaster also installs KraftMaid and Cambria, and we handle Silestone for owners who want quartz in the new ADU kitchen. Every price change is a written change order. Every permit is pulled. Every job carries the 90-Day Done Right Promise – and our crew members are background-checked and carry the Barrett name on every visit.
Call (888) 427-1810 for a free estimate. A live person picks up, 24 hours a day, seven days a week. Standing offers include $40 off any repair over $200, a free second opinion on any written estimate, no trip charge inside the county, and a permanent 10% senior and veteran discount.
Written by the team at Barrett & Sons Construction Lancaster, serving Lancaster and nearby areas.