A Barrett company - serving Lancaster, CA

Tamko Driveway & Pavers in Lancaster, CA

Driveway & paversDriveway & pavers
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Tamko Driveway & Pavers: The Lancaster Owner’s Guide

We install Tamko-compatible driveway and paver systems across Lancaster, and a full paver driveway typically runs $7,000 – $18,000 installed, while repair and re-lay work on a failing section usually lands between $400 and $1,800 depending on how much has to come up. We’re an independent contractor and not affiliated with Tamko, but we know the product line and we can usually get a Tamko paver match ordered and installed within one to two weeks of the estimate, not the same day. Lancaster owners usually find out something’s wrong the same way: a paver heaves out of line near the driveway apron after a summer, or the color starts fading unevenly and they realize the block they bought five years ago to patch a corner no longer matches the row next to it.

Call (888) 427-1810

What makes this page different from a product brochure is that it’s written for the moment the system has already let you down. You’re not shopping. You’re trying to figure out whether the crack is cosmetic, whether the color mismatch can be fixed, and whether the installer who put it in did something wrong in the first place. Those are the questions we hear every week in Lancaster, and they deserve straight answers, not a sales pitch.

Which Tamko Models This Applies To

Tamko’s paver and hardscape line has shifted names and series over the years, and Lancaster’s housing stock carries a mix of them. The ones we see most are the older Heritage and Estate 60mm and 80mm paver series, plus Tamko’s textured cap and edge restraint components that installers used to finish the perimeter. If you’re not sure what you have, look at the pallet band, the invoice from the original install, or the imprint on the bottom face of a lifted paver. Measure the paver’s face width and thickness (most residential runs are 60mm, with 80mm on driveways that see heavier loads) and note the surface texture, because the colorant and finish are the part that ages fastest and the piece that’s hardest to match once a series is discontinued.

The genuine-vs-aftermarket decision on Tamko is not really about brand loyalty. It’s about whether a matching series is still in production. If it is, an OEM match is the right call for a repair where the replacement pavers will sit next to the existing ones. If the series has been retired, a quality aftermarket paver in a close tone, or better, a full re-lay of the affected row, will look cleaner than a mismatched OEM leftover found online. A tricky detail: paver thickness has to match within a few millimeters across a tied-in joint, so the existing base course has to be checked before any new piece goes down. We also service KraftMaid, Cambria, and Silestone on the kitchen side, and the same rule applies there: match the spec, not just the label.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Tamko Driveway & Pavers Is Failing

Pavers don’t fail the way a roof does. They fail slowly, and the first sign is usually a small thing that gets ignored for a season or two.

  • Heaving or rocking pavers near the apron or a downspout. This is almost always water finding a soft spot in the base, not the paver itself. Lancaster’s hard summer ground and sudden winter rain push and pull the sub-base, so a paver that was flat in April can rock by October.
  • Uneven color fading across one side of the driveway. The south-facing run takes the brunt of the Antelope Valley sun and fades first. If the whole surface looks chalky or washed out, the sealer (or the lack of it) is the culprit, and it’s usually restorable without replacing pavers.
  • Sand washing out of the joints. Polymeric sand fails in the same cycle, and once it’s gone, water goes straight into the base. This is the single most common call we get from Lancaster owners, and it’s a real repair, not a cosmetic concern.
  • Cracked or chipped cap blocks and edge restraints. The restraint is what holds the whole field in place. When it fails at the driveway edge, the pavers spread, and that spreading shows up as a widening joint an inch from the curb.
  • Visible settlement at the garage apron or street cut. This is usually an installer error, a missed compacted base or a thin concrete collar. It’s the one symptom that changes the scope, because fixing it means lifting pavers, re-doing the base, and re-setting.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Here’s what the work actually runs in Lancaster, with the numbers you’ll see on a written estimate instead of a phone quote:

Job Installed range in Lancaster
Full paver driveway (Tamko-compatible) $7,000 – $18,000
Paver repair / re-lay of a failed section $400 – $1,800
Polymeric sand re-joint and re-seal $250 – $700
Concrete driveway (comparison) $4,500 – $12,000

What drives the range: square footage, whether the base has to be excavated and re-compacted, whether a matching Tamko series is still available, and how much edge restraint and cap work is needed. Every estimate we write itemizes pavers, sand, base material, edge restraint, labor, and disposal, and any change in scope comes to you as a written change order before we touch the driveway. Work is backed by our 90-Day Done Right Promise, written on every contract.

DIY or Call Us?

You can safely do a few things yourself. Lift a loose paver and look at whether the base under it is firm or soft. Check that the downspouts point away from the driveway, not onto it. Sweep sand into joints that have gone hollow, and re-seal a small area if you’ve done it before. That’s about where it stops for most homeowners.

Where it goes wrong: base repair, edge restraint replacement, and re-setting a field of pavers. A paver driveway that looks flat can weigh tens of thousands of pounds, and lifting it wrong can move the surrounding field or crack the adjacent slab. Cutting pavers with a dry saw puts silica dust in the air, and a 60mm paver won’t bend to a bad sub-base no matter how hard you try. If the whole driveway is spreading at the edges or the apron has settled, call us at (888) 427-1810 and we’ll come look at it. A free estimate costs you nothing, and a second opinion on someone else’s written bid is free too.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 427-1810
Local Service Coverage

Request a Free Estimate in Lancaster

Tell us what you need - Barrett & Sons Construction Lancaster responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch