Bathroom remodeling
Kitchen remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
IKO Bathroom Remodeling: The Lancaster Owner’s Guide
IKO bathroom remodeling in Lancaster runs $9,000 to $28,000 installed, depending on the scope: a tub-to-shower conversion sits at the low end, a full gut with new tile, vanity and plumbing rough-in climbs toward the top. IKO is most familiar here as a roofing and waterproofing brand, so this guide is about their waterproofing membranes, underlayments and shower-system components used in bathroom work. Barrett & Sons Construction Lancaster is an independent service provider, not affiliated with IKO. We install and replace IKO-compatible materials and repair what’s failed. Most Lancaster owners find out something is wrong when a ceiling below the bathroom shows a stain, grout around the shower floor keeps cracking open, or the shower pan feels spongy underfoot after a decade of hard water and desert heat cycling.
Which IKO Models This Applies To
IKO’s bathroom-relevant line is their waterproofing family: self-adhered and loose-laid sheet membranes, liquid-applied coatings, and the primers and sealants that go with them. Match the product to the assembly, not the other way around. A sheet membrane made for a bonded mortar bed behaves differently from a liquid coating over cement board, and mixing them without checking compatibility is where callbacks start. Every pail, roll and tube carries a product code and a batch number on the label; photograph both before anything gets torn out, because the code tells you the exact spec and the manufacturer’s published limitations. In Lancaster’s climate, the bigger factor is thermal movement – a slab-on-grade bathroom here swings with summer attic heat and cool winter nights, and membrane systems rated for that movement hold up far better than older cut-rate sheet goods. On OEM versus aftermarket: for IKO-branded membranes, stick with genuine IKO or a recognized equivalent tested to the same standard, because a bargain membrane saves a few hundred dollars and can cost you the whole shower floor two winters later.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your IKO Bathroom Remodeling Is Failing
- Water staining on the ceiling below. The membrane has a breach or the pan wasn’t sloped correctly, letting water pool and find a path down. In Lancaster, we see this most in 1990s-era bathrooms where the original pan never had a pre-slope.
- Grout lines cracking and reopening after regrouting. Grout cracking is a symptom, not the problem. Movement underneath – a flexing substrate, a failed membrane bond, or tile set over greenboard – keeps reopening the same lines no matter how many times you fix them.
- A spongy or soft shower floor. Water has reached the substrate and the wood or cement board has started to break down. This one doesn’t improve with time and usually means a full pan rebuild.
- Musty smell that returns after cleaning. Moisture is trapped behind tile or under the floor with nowhere to dry out. Airflow and ventilation help, but a persistent smell after deep cleaning points to a membrane failure you can’t reach.
- Peeling or lifting membrane at seams and corners. Primer wasn’t applied correctly, the surface was dusty, or the membrane was installed over a damp substrate. Seams and inside corners are where these systems fail first.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
In Lancaster, a full bathroom remodel with a rebuilt waterproofed shower runs $9,000 to $28,000. A small bathroom remodel lands at $5,000 to $12,000. A shower replacement by itself is $3,000 to $8,500, a walk-in shower installation $4,500 to $12,000, and a tub-to-shower conversion $3,500 to $10,000. A vanity installation, if that’s the only piece moving, is $800 to $3,000. What pushes you toward the top of the range: tile selection, moving plumbing, adding a second shower valve, or discovering rotted framing once the old pan comes out. Every scope, allowance and price change arrives as a written change order before work starts, so the number you sign is the number you pay. Permits get pulled and inspections signed on eligible jobs, and the work carries the written 90-Day Done Right Promise.
DIY or Call Us?
You can safely check a few things yourself: look for soft spots by pressing firmly across the shower floor, inspect the caulk and grout lines at seams and corners, check for staining on the ceiling below, and photograph the product labels before anything gets removed. Where it goes wrong is the rebuild itself. Waterproofing a shower is unforgiving work – one skipped primer coat, one seam that doesn’t bond, one missed pre-slope, and you’re tearing out a finished tile job in a year. This isn’t electrical or high-tension work, so the risk is money and time, not injury, but the cost of a do-over is real. Call (888) 427-1810 for a free estimate and we’ll tell you honestly whether you’re looking at a repair or a rebuild.
FAQs
A properly installed IKO waterproofing assembly should hold up 20 to 30 years indoors, though Lancaster’s heat cycling and hard water shorten that if the pan wasn’t sloped or the grout isn’t maintained. Most failures we see trace back to installation, not the material itself. Call (888) 427-1810 for an inspection and an exact quote – estimates are free.
Sometimes. A localized seam failure at a corner can often be repaired in place if the tile and substrate underneath are still sound. Once water has reached the substrate or the pan is soft, a full rebuild is the honest answer. We’ll tell you which one you’re facing before any work starts. Call (888) 427-1810 for a free second opinion on any written estimate.
A shower replacement typically runs one to two weeks; a full bathroom remodel runs three to five weeks depending on scope, inspections and tile selection. Lancaster inspections schedule on their own timeline and we build that into the estimate. Call (888) 427-1810 to schedule your free estimate.
We specify the IKO product code from your existing label or the assembly spec, then source genuine IKO materials through our supplier channels – matched to the exact product, not a substitute. Nothing sits in our possession ahead of time; materials get ordered per job and arrive with the spec sheet. Ask about our seniors and veterans discount while you’re at it. Call (888) 427-1810 for a written, line-item quote.
Written by the team at Barrett & Sons Construction Lancaster, serving Lancaster and nearby areas.