A Barrett company - serving Lancaster, CA

CertainTeed Kitchen Remodeling in Lancaster, CA

Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

CertainTeed Kitchen Remodeling: The Lancaster Owner’s Guide

A CertainTeed-backed kitchen remodel in Lancaster typically runs $14,000 – $45,000 installed, depending on cabinet count, countertop footage and whether we’re moving plumbing or electrical. If a part on your CertainTeed kitchen product has failed – a sagging cabinet hinge, a delaminating countertop edge, a mis-machined door – we match the replacement to your exact model line, quote it in writing, and pull the permit when the job needs one. Barrett & Sons Construction Lancaster is an independent installer, not affiliated with CertainTeed.

Call (888) 427-1810

Most Lancaster owners find out something’s wrong the same way: a cabinet door stops sitting flush, a drawer glides rough, or the countertop seam near the sink starts showing a hairline crack after a hot Antelope Valley summer. In west Lancaster near the Quartz Hill side, the daily swing from 100°F afternoons to 60°F nights works cabinet joints and laminate edges harder than anything back East. By the time a homeowner calls us, the failure is usually months old and the allowance wasn’t on paper to begin with.

Which CertainTeed Models This Applies To

CertainTeed doesn’t make a single “kitchen model” – their kitchen presence runs through cabinet lines and surfacing products sold under specific series names, and the part you need depends entirely on which series and which production year your kitchen carries. Look for the manufacturer label inside a cabinet door or on the back of a drawer box; it lists the series name and a date code. Measure the failed piece before you call anyone: door width and height, hinge cup bore (35mm is the modern standard, older lines ran smaller), and drawer glide length.

Here’s the compatibility gotcha that bites Lancaster owners: CertainTeed cabinet series changed hinge and glide hardware between production runs, so a hinge that fits a 2012 series cabinet won’t seat in a 2017 box even though the door looks identical. OEM parts are the safe match when your series is still supported. Quality aftermarket equivalents – Blum, Grass, Hettich for hinges and glides – often outlast the original and cost less, but only if the bore and plate pattern match. We check the label and measure before we order, every time.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your CertainTeed Kitchen Remodeling Is Failing

Here’s what failure actually looks like on a CertainTeed kitchen in Lancaster’s climate:

  • Doors that won’t stay shut or sit proud of the frame. The hinge plate has loosened from the cabinet side or the hinge itself has wallowed out – common after years of dry heat shrinking the wood around the screws.
  • Drawers that glide rough or bind halfway. The glide rail has worn or the cabinet box has racked slightly from seasonal movement. Usually the glide, sometimes the box.
  • Countertop seams opening near the sink or range. Heat cycling plus moisture from the sink works the seam joint. A hairline in spring can be a visible gap by August.
  • Laminate or edge banding lifting at corners. Adhesive failure from dry Antelope Valley air, most often on the doors nearest the range where heat adds to it.
  • Cabinet doors that have swollen or delaminated at the bottom edge. Moisture wicking up from a slow leak under the sink or a mop that’s been too wet too often. This one usually means the box, not just the door.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Installed pricing for the kitchen work that surrounds a CertainTeed product replacement in Lancaster, quoted line-item in writing:

  • Full kitchen remodel: $14,000 – $45,000
  • Small kitchen remodel: $9,000 – $20,000
  • Cabinet installation: $4,000 – $13,000
  • Countertop installation: $2,000 – $6,500
  • Backsplash installation: $800 – $2,500
  • Kitchen island installation: $3,000 – $10,000

What drives the range: cabinet count and box quality, countertop material and footage, whether we’re moving plumbing or electrical, and whether the old kitchen has to come out first. Parts-and-labor are quoted separately so you can see what the hardware costs and what the install costs. Every price change is a written change order before any work moves – the allowance that isn’t on paper is a surprise waiting for a date. Workmanship is backed by the written 90-Day Done Right Promise.

DIY or Call Us?

You can safely check the model label inside a cabinet door, measure the failed part, and tighten a loose hinge screw or glide mount with a screwdriver. That’s it. Where DIY goes wrong on a CertainTeed kitchen is when the fix requires cutting a new bore, rehanging a door on a racked box, or pulling a countertop seam – you’re one wrong measurement from a door that won’t close and a countertop that has to come off. And if the failure traces to a slow leak under the sink, that’s water damage hiding behind the cabinet back, not a hardware problem.

If the part is matched and quoted, call (888) 427-1810 for a free estimate. We’ll tell you honestly whether it’s a $60 hinge or a cabinet that needs replacing.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 427-1810
Local Service Coverage

Request a Free Estimate in Lancaster

Tell us what you need - Barrett & Sons Construction Lancaster responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch