Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
American Standard Kitchen Remodeling: The Lancaster Owner’s Guide
American Standard kitchen remodeling in Lancaster runs $14,000 to $45,000 installed, and the price depends on cabinet layout, countertop material, and how much of the plumbing and electrical has to move. That number is for the whole kitchen, not a single component. Most Lancaster owners don’t start by shopping for a remodel. They start because something failed: a cabinet box swelling under a sink, a hinge that won’t hold, a finish peeling off the doors after years of dry Antelope Valley air. Once one piece goes, the question becomes how much of the kitchen comes with it. We install American Standard-compatible kitchen fit-outs and we price the whole job in writing before work starts. Barrett & Sons Construction Lancaster is an independent service provider and is not affiliated with American Standard.
Which American Standard Models This Applies To
American Standard has been in kitchen and bath fixtures for well over a century, and its kitchen-side catalog is broader than most owners realize. A lot of Lancaster kitchens have an American Standard sink, faucet, or garbage disposal at their center, and many also carry American Standard cabinets and hardware from builder-grade runs. To match anything, find the model number: it’s stamped on the underside of most sinks, printed on a sticker under the faucet base plate, and stamped on the disposal housing near the outlet flange. Pull those numbers before you call anyone. Cabinet runs usually have a series name on a sticker inside the door of the base cabinet.
Here’s the OEM-versus-aftermarket call that matters. For faucet cartridges, sprayer heads, and disposal components, OEM American Standard parts fit the first time and are worth the extra cost when the fixture is under 15 years old. For cabinet hardware – hinges, drawer slides, shelf pins – quality aftermarket is often the smarter money, because hinge standards are fairly universal and the OEM price premium buys you little. Countertops and backsplash material don’t track to a brand at all; they’re a separate decision. Both paths are legitimate. Just know which one you’re on before the order goes in.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your American Standard Kitchen Remodeling Is Failing
These are the symptoms we hear about most in Lancaster homes, and what’s usually causing each one.
- Soft spots in the cabinet floor under the sink. That’s water damage from a long-term faucet or drain leak, and once the particleboard or MDF core gets wet it doesn’t recover. Replacing the faucet without replacing the cabinet box just buries the problem.
- Doors that won’t stay adjusted. Hinges loosen because the mounting screws have stripped the wood or the plate holes have wallowed out. In dry Lancaster air, cabinet wood shrinks in summer and the fit loosens faster than it would near the coast.
- Peeling or chalking finish on doors and drawer fronts. UV exposure through a south-facing kitchen window cooks a lacquered or painted finish over time. Once it starts peeling at the edges, touch-up doesn’t hold.
- Faucet dripping at the spout or base. Worn cartridges and O-rings. This is cheap to fix and worth fixing before it damages the cabinet below it.
- Countertop seam lifting or a backsplash tile letting go. Movement in the substrate, or adhesive that dried out. Small and fixable early; expensive once water gets behind it.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
In Lancaster, here’s what the line items actually run when work is priced in writing, parts and labor separated.
| Scope | Installed price range |
|---|---|
| Full kitchen remodel | $14,000 – $45,000 |
| Small kitchen remodel | $9,000 – $20,000 |
| Cabinet installation | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Backsplash installation | $800 – $2,500 |
| Kitchen island installation | $3,000 – $10,000 |
What drives you toward the top of those ranges: moving plumbing or electrical, adding an island that needs a new floor and a new circuit, or choosing stone over laminate. What keeps you low: keeping the layout and swapping surfaces. We quote in writing with allowances spelled out, and any change during the job comes as a written change order before the work happens. Every eligible job gets permits pulled and inspections signed. Every completed job carries our 90-Day Done Right Promise.
DIY or Call Us?
You can safely check a lot of this yourself: pull the faucet aerator and clean it, tighten cabinet hinges with a screwdriver, check under the sink for moisture with a flashlight, and look at whether the counter is still level. Where DIY goes wrong is anything involving a live water line, a gas line to the range, or new electrical for a disposal or island outlet. A slow leak behind a cabinet wall will rot the frame before you see a drop on the floor. The honest split is this: diagnosis is fine to do yourself. Cutting into walls, moving gas, and rewiring are not. Call (888) 427-1810 and we’ll walk through what you’re seeing and what it likely costs to fix.
FAQs
A well-installed kitchen in Lancaster typically holds up 20 to 30 years for cabinets and 10 to 15 for faucets and disposals, with the dry desert climate shortening the life of wood finishes and rubber seals faster than in coastal markets. If your kitchen is past 20 and showing two or more of the symptoms above, replacement usually beats repeated repair. Call (888) 427-1810 for an exact quote; estimates are free.
Often yes. A dripping American Standard faucet is usually a cartridge and O-ring swap, and that’s a same-visit repair rather than a remodel. Cabinet doors with peeling finish can sometimes be refaced instead of replaced. What can’t be repaired is a water-damaged cabinet box or a countertop substrate that’s already swelled. We’ll tell you which one you’re looking at before anyone writes an estimate.
A full kitchen remodel in Lancaster runs about 4 to 8 weeks once permits are pulled, and a cabinet-only or countertop-only job runs 3 to 10 days. The permit and inspection timeline is the variable, and we handle that for you. Call (888) 427-1810 to see where your project falls.
We source American Standard parts through the manufacturer’s own parts channels and match them to the model number you pull off the fixture, not by guessing from a photo. If a current part has been discontinued, we’ll tell you in writing what the approved equivalent is before you approve it. Call (888) 427-1810 and have your model number handy – it saves a step.
If your American Standard kitchen in Lancaster has a failed piece you can’t ignore anymore, call (888) 427-1810 for a free estimate. We’ll look at what’s actually failing, quote it in writing with every allowance spelled out, pull the permits, and stand behind the work with our 90-Day Done Right Promise. We also install KraftMaid, Cambria, and Silestone when you’re ready to see the full range of materials.
Written by the team at Barrett & Sons Construction Lancaster, serving Lancaster and nearby areas.