A Barrett company - serving Lancaster, CA
K

Kohler Driveway & Pavers in Lancaster, CA

Driveway & paversDriveway & pavers
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Kohler Driveway & Pavers: The Lancaster Owner’s Guide

We install and service Kohler hardscape systems for Lancaster homeowners, and if your paver drive or patio has a failing element, expect an installed paver driveway to run $7,000-$18,000 and a paver patio $3,500-$11,000, depending on square footage, base prep, and the pattern you choose. Kohler’s hardscape line leans toward structured, modular pavers with tight tolerances and proprietary edge restraint, so when a part fails, the fix is usually a matched component, not a random paver from the yard. Owners in Lancaster typically notice it the same way: a rocker underfoot after a hot week, joints washing out after a winter rain, or an edge piece lifting where the driveway meets the street. We’re an independent contractor and not affiliated with Kohler.

Call (888) 427-1810

Which Kohler Models This Applies To

Kohler’s paver systems don’t use the model-number scheme you’d see on a toilet or faucet. Instead, identification runs off the product family and the printed spec sheet tucked into the pallet wrap, plus the pattern name and the exact face dimensions. That matters, because a nominal “6×9” paver from one Kohler series won’t match the joint line of another, and Lancaster’s freeze-thaw swings across the high desert will open a bad match into a visible fault line within a season. Pull a loose paver and measure the true face length and width with a tape, not the nominal size. Photograph the pallet label if any of it is still legible. For edge restraint, base fabric, and polymeric joint sand, the Kohler spec sheet is the reference, not the aisle at the big box. On OEM versus aftermarket: OEM restraint and sand match the system and hold the warranty line; quality aftermarket base aggregate is fine and often cheaper. We also service KraftMaid, Cambria, and Silestone on the interior side of the same homes.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Kohler Driveway & Pavers Is Failing

  • Rocker pavers after a hot spell. Lancaster summer heat expands the slab and the joint sand compresses, leaving pavers loose on their bedding. A rocker means the bedding layer is gone, not that the paver is defective.
  • Joint sand washing out at every rain. Polymeric sand that was swept in dry, rather than installed wet, slumps and drains. Once it’s gone, the pavers grind against each other and chip the corners.
  • Edge restraint lifting where the drive meets the apron. Vehicle weight over a shallow edge restraint curls it up. That’s a base failure showing at the edge, and it spreads inward with every turning tire.
  • Efflorescence blooming across the surface. White chalky film that returns after every cleaning signals moisture trapped under the pavers, usually from a base that holds water instead of draining it.
  • Settlement dips in the wheel path. Two shallow ruts where the car parks means the subbase was under-compacted. It worsens through the wet months and doesn’t recover on its own.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

In Lancaster, expect $7,000-$18,000 for a paver driveway installation, $3,500-$11,000 for a paver patio, $5,000-$14,000 for a full driveway replacement, and $250-$700 for sealing an existing surface. If your concrete is what’s failing and you’re switching to pavers, that driveway replacement number is your reference; if you already have pavers and want a concrete look, concrete driveway installation runs $4,500-$12,000. The range is driven by square footage, how much base has to be excavated and rebuilt, edge restraint length, drainage corrections, and whether the old surface has to be hauled off. We break the quote into parts, labor, and base prep as a written line-item, so you can see what a Kohler-matched paver actually costs versus the base work underneath. Every price change comes as a written change order before we touch the job, and the 90-Day Done Right Promise is written on the contract.

DIY or Call Us?

You can safely do a few things yourself: walk the drive and mark the rockers with chalk, photograph the pallet label, measure a loose paver, and rinse off efflorescence to see if it returns. That’s diagnosis, and it helps us quote accurately. What goes wrong is the repair. Re-setting a paver means pulling the restraint, re-compacting the bedding, and matching the joint sand to the system, and on a drive, a shallow fix that looks fine in July will rut by the first real rain. Base correction under a driveway edge is genuinely heavy work, and a bad edge repair is worse than calling us. Call (888) 427-1810 and we’ll come out, tell you whether it’s a paver swap or a base rebuild, and quote it in writing.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 427-1810
Local Service Coverage

Request a Free Estimate in Lancaster

Tell us what you need - Barrett & Sons Construction Lancaster responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch