Home additions & ADU
Kitchen remodeling
Bathroom remodeling
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Silestone Home Additions & ADU: The Lancaster Owner’s Guide
We build Silestone-compatible home additions and ADU work in Lancaster, and installed projects here run $45,000 – $130,000 for a home addition and $90,000 – $220,000 for a full ADU from the ground up. Nobody builds an addition in a day, so we don’t promise that – we quote in writing, pull the permits, and schedule real dates. Owners usually find trouble the same way: a slab edge that has started to craze near a new opening, a countertop run that no longer sits level after framing settles, or a seam that opens because the room behind it moved. By the time the surface looks wrong, the structure behind it has been moving for a while.
Key Takeaways
- Silestone is engineered quartz, and it only performs as well as the framing and substrate under it.
- Lancaster’s desert swings – hot days, cold nights, single-digit humidity – stress both new construction and the quartz installed in it.
- Every scope, allowance, and price change reaches you in writing before work starts.
- Permits pulled and inspections signed on every eligible job, because Lancaster County inspects what it permits.
Which Silestone Models This Applies To
This page covers Silestone quartz surfaces within an addition or ADU project, not a standalone slab swap. Cosentino sells Silestone in several families and finishes, and the practical compatibility details are the slab thickness (most residential work lands at 2 cm or 3 cm) and the edge profile, because an ADU with a kitchenette and a bathroom vanity usually wants two different edges cut from the same slab. If you already own a Silestone surface and need it matched or extended for a new room, we need the exact color name from the original paperwork or a photo of the sticker on the underside of the slab. Color names change and dye lots drift, and a mismatch discovered after the cabinets are set is an expensive discovery.
On sourcing: Cosentino fabricates through authorized fabricators, and the good ones hold the calibration and the tooling for quartz specifically. An aftermarket or generic quartz may look close in a showroom but read differently in Lancaster daylight. If you’re comparing bids, ask which fabricator cuts the slab and confirm the Silestone color by name in the written quote. We’re an independent builder and not affiliated with Silestone; we’re telling you what we know from installing it. We also handle KraftMaid, Cambria, and Kohler when a project brings those brands into the same room.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Silestone Home Additions & ADU Is Failing
Quartz itself rarely fails on its own. What fails is everything holding it, or the joint where two pieces meet.
- A visible seam that has opened or gone dark. Seams fail when the substrate below shifts or when the original adhesive was applied too thin. In Lancaster, a room that gets direct west sun all afternoon expands and contracts enough to work that seam loose over two or three summers.
- Hairline cracks radiating from a sink cutout or cooktop opening. These come from point loads and from insufficient support around a large cutout. Quartz is strong in compression and unforgiving at a crisp inside corner.
- A countertop that rocks or shows a shadow gap against the cabinet. That’s framing movement, a settled floor, or cabinets not shimmed to the slab. The quartz is telling you the room moved.
- Crazing or a dull cloudy patch on a polished face. Usually heat damage from a hot pan or a chemical cleaner that dulled the resin. Silestone is non-porous and stain-resistant, but it is not heat-proof.
- Water staining along the wall where the counter meets the backsplash. Caulk failure, not quartz failure, but it lets moisture into the substrate and can delaminate a plywood build-up.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Prices below are installed ranges for Lancaster and the surrounding Antelope Valley towns, and they cover the surface work within a larger project. If you need a standalone repair, the $40 Off Any Repair Over $200 offer applies.
- Countertop installation within an addition or ADU: $2,000 – $6,500
- Kitchen island installation: $3,000 – $10,000
- Backsplash installation: $800 – $2,500
- Bathroom vanity installation: $800 – $3,000
- Home addition, full project: $45,000 – $130,000
- ADU construction, full project: $90,000 – $220,000
- Garage conversion, if that’s your route to an ADU: $30,000 – $80,000
The range moves with slab size, edge profile, number of cutouts, whether new cabinets are going in, and how much framing correction the room needs before a slab can sit flat. Our commercials have three parts: scope in writing, allowances in writing, change orders in writing. Every completed job carries the written 90-Day Done Right Promise.
DIY or Call Us?
You can safely check a few things yourself: run a level across the countertop to see where it rocks, look at the seam with a flashlight at a low angle, and photograph any crack with a tape measure alongside it. What you should not do is pull a slab, cut quartz, or try to reset a countertop on your own. Quartz slabs in 2 cm and 3 cm run heavy, a dropped slab is a real injury, and cutting quartz dry releases silica dust that damages lungs. Wet-cutting and proper respiratory protection are the standard, not an option. There’s also a permit question on any addition work, and this is where homeowners get caught. The permit inspector works for you, not for us, and that’s why we like him. If something in your Lancaster project looks wrong, call (888) 427-1810 and we’ll take a look.
FAQs
A well-supported Silestone surface routinely lasts 15 to 25 years or more, and the quartz itself is usually not the first thing to go. The seam adhesive, the caulk line, and the substrate below tend to fail first. In Lancaster, the afternoon heat on a west-facing wall is the biggest factor in how quickly a seam or an edge joint gives out.
Sometimes, yes. A small chip or a hairline crack can often be filled and color-matched by a fabricator, and a seam can be re-adhered. A crack that runs through a cutout, or one that has spread past a few inches, usually means replacement. Call (888) 427-1810 for an exact quote – estimates are free, and the free second opinion on any written estimate you already have applies too.
A countertop measured, fabricated, and installed usually takes one to three weeks, because the slab is cut and polished before it arrives. A full home addition is months, not days, and an ADU runs longer. We’ll put real dates in the written scope so you know what you’re planning around.
We source through authorized Silestone fabricators and confirm the color by name in the written quote before anything is cut. We don’t carry parts on a truck and we don’t claim to stock Silestone locally – the slab is ordered to your exact dimensions and your exact color.
We also service KraftMaid, Cambria, and Kohler when a Lancaster project brings them in. Barrett & Sons has been owner-operated since 1998, every eligible job gets its permits pulled and inspections signed, extra work gets a written change order before it happens, and every finished project is backed by our 90-Day Done Right Promise. A live person answers the phone around the clock, and the senior and veteran discount is permanent. Call (888) 427-1810 to schedule your free estimate, or ask about the no trip charge inside the county.
Written by the team at Barrett & Sons Construction Lancaster, serving Lancaster and nearby areas.