A Barrett company - serving Lancaster, CA

Cambria Home Additions & ADU in Lancaster, CA

Home additions & ADUHome additions & ADU
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Cambria Home Additions & ADU: The Lancaster Owner’s Guide

We build Cambria-finished home additions and ADUs in Lancaster, and the installed price typically runs $45,000 to $130,000 for an addition or $90,000 to $220,000 for a full ADU. If you already own a Cambria product and a part on it has failed – a panel seam that has opened, a countertop edge that has chipped, a slab that has cracked against an unyielding frame – we match the replacement component to your Cambria line and rebuild it correctly. Lancaster owners usually spot the problem after a summer of temperature swings when a joint that was tight in March has opened by August.

Call (888) 427-1810

Key Takeaways:

  • Cambria is engineered quartz: roughly 93% ground quartz bound with resin. It does not tolerate unsupported spans or direct heat.
  • The Antelope Valley’s swing from 100°F-plus summers to near-freezing winter nights is hard on any stone-to-frame junction.
  • We install and repair Cambria-compatible additions and ADUs across Lancaster. We are independent; we are not affiliated with Cambria.
  • Installed addition pricing in Lancaster starts at $45,000. ADUs start at $90,000. Every scope arrives in writing.

Which Cambria Models This Applies To

Cambria makes quartz surfacing, not building systems, so “models” here means the Cambria product lines that show up inside Lancaster additions and ADUs. The common ones are the slab collections (the whites and marbles like Brittanicca and Ella, plus the darker veined looks) used for kitchen islands, bath vanities and bar tops in an ADU. Cambria slabs come in standard thicknesses of 1cm, 2cm and 3cm, and that thickness governs everything downstream: the edge profile you can safely run, the substrate you need under it, and whether a cantilevered island top needs a steel support. A 1cm slab over a 24-inch overhang will deflect. A 3cm slab on the same overhang, properly supported, will not.

The other half of the compatibility question is the cabinet and substrate it sits on. We install KraftMaid cabinetry in these spaces alongside Cambria, which matters because a quartz top is only as flat as the boxes under it. If your replacement is going onto existing cabinets, we measure for level and shim before we template – Cambria is templated and cut to your actual space, not ordered off a shelf. Nothing here comes from a truck; each slab is fabricated to your job.

Matching an existing install: pull the original fabricator paperwork if you have it. The collection name and thickness are printed there. No paperwork? We identify the look and thickness on site and quote a replacement that reads the same in the room. We don’t dress up an aftermarket look as Cambria – we tell you what it is.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Cambria Home Additions & ADU Is Failing

Quartz fails in slow, visible ways. Here’s what Lancaster owners actually describe to us:

  • A seam that has opened at the join. Two slabs meet at a glued seam, and thermal movement pulls it apart. In Lancaster, a west-facing ADU kitchen that bakes all afternoon is the usual suspect.
  • A crack running from a corner or a cutout. Sink and cooktop cutouts are stress points. If a corner was cut square instead of radiused, the crack starts there and travels.
  • A chipped edge or a dinged corner. Usually impact, not material failure – a dropped pan, a chair back. It’s repairable, but the repair is a finishing job, not a glue job.
  • Discoloration or a dull patch near the range. Resin in quartz scorches. A hot pan set down directly, or a slow cooker left running for a day, leaves a mark that polishing won’t lift.
  • A top that rocks or feels hollow. The slab isn’t the problem – the substrate or cabinet run has shifted. Left alone, the slab cracks over it.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Installed pricing for the work we do in Lancaster, stated as plain ranges so you can budget before you call:

Job Installed Range
Home Addition (Cambria-finished) $45,000 – $130,000
ADU Construction $90,000 – $220,000
Garage Conversion $30,000 – $80,000

For a stone replacement inside an existing space, the range is driven by linear footage of slab, the edge profile, whether a seam has to be re-cut, and whether the substrate needs re-leveling. We give you a line-item quote with the slab, fabrication and install broken out separately, so you can see where the money goes. Additions and ADUs are permitted jobs – we pull the permits and get the inspections signed, which the last contractor may have told you were optional. Every price change arrives as a written change order before work proceeds. The finished work carries our written 90-Day Done Right Promise.

DIY or Call Us?

Here’s the honest split. You can safely check a few things yourself: run a straightedge across the top to see how much it rocks, look at the underside of an overhang for the support bracket, and check that the cabinets under the slab are solid and level. That tells you what’s wrong.

What you should not do yourself is reset a slab, glue a seam, or pull a top to fix a substrate. Quartz slabs are heavy – a 3cm top over a six-foot run is a two-person job with suction cups and a rental A-frame, and a dropped corner is a replacement, not a repair. Never lay a hot pan or a heat gun near Cambria; the resin scorches and the mark doesn’t buff out. If you suspect a structural issue behind the stone, that’s the point to call. We’re independent and not affiliated with Cambria, and we’re happy to give a free second opinion on any written estimate you already have. Call (888) 427-1810.

Frequently Asked Questions

Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 427-1810
Local Service Coverage

Request a Free Estimate in Lancaster

Tell us what you need - Barrett & Sons Construction Lancaster responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch