Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Wellborn Driveway & Pavers: The Lancaster Owner’s Guide
The short answer: If your Wellborn driveway or paver system is failing, we install Wellborn-compatible driveway and paver work right here in Lancaster, CA. Whether that’s fixing a settled edge or re-laying a whole failed run, paver driveway installation in Lancaster runs $7,000 – $18,000 installed, with driveway sealing to protect the joints at $250 – $700. We’re an independent contractor, not affiliated with Wellborn, so we’re free to tell you straight whether you need genuine Wellborn components or a quality equivalent that fits the same job.
Most owners don’t wake up knowing they have a “part” problem. They notice the symptom first. A paver at the driveway apron tips when the car rolls over it. A joint sand washes out every time it rains and the weeds move in. One corner of the driveway settles below the grade and holds a puddle for a week. That’s usually when the call comes in. It’s the pattern of failure, not a single broken piece, that tells us where the base failed and what it’ll take to set it right.
Key Takeaways
- Wellborn-compatible paver and driveway work in Lancaster: $7,000 – $18,000 installed for a full paver driveway.
- Most paver “failures” trace back to base, drainage, or edge restraint, not the surface pavers themselves.
- Sealing runs $250 – $700 and stretches the service life of a sound driveway.
- We’re independent from Wellborn and give you an honest OEM-vs-equivalent call in writing.
- Every eligible job is permitted and inspected, and every price change is a written change order.
Which Wellborn Models This Applies To
Wellborn’s planting-stone lines and hardscape pieces show up across a wide range of yard products, and the compatibility question most Lancaster homeowners run into is the joint-and-thickness mismatch, not the brand name. When you’re replacing or extending a run, the new paver has to match the existing piece on thickness, joint width, and edge profile, or the whole field sits uneven and the restraint won’t seat. Print pavers, plank-style pavers, and large-format slabs each have different bedding requirements, and a slab that’s a quarter-inch thicker than its neighbor will telegraph through the surface as a trip hazard within a season.
Here’s how to identify what you actually have. Check under the lip of the driveway apron or pull a loose paver at the edge and measure the thickness and footprint. Look at the back of a break for a stamped manufacturer mark. Note the color and texture so a genuine Wellborn replacement matches the run, because dye lots drift over the years even within a single line.
The genuine-vs-equivalent decision is the one worth slowing down for. Genuine Wellborn pieces keep the field consistent and the color matched. A quality equivalent can be the smarter, cheaper move when a full re-lay is happening anyway and color-matching the old run stops mattering. We put the recommendation for your specific driveway in writing before we order, so there’s no guessing at pickup day.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Wellborn Driveway & Pavers Is Failing
The symptoms below are how a failing install announces itself. Each one points to a cause, and the cause is what we actually fix.
- Pavers rocking or tipping underfoot. The bedding sand under that paver has washed out or the base below it settled. Cars rolling over an unbedded paver start breaking edges.
- Joint sand washing out with every rain. That’s a drainage or restraint problem, not a paver problem. The water is escaping through the joints instead of shedding off the grade.
- Uneven settling along the driveway apron. The transition at the street takes the most load and absorbs the most runoff. Apache and other Lancaster neighborhoods on expansive desert soil see this early when the base wasn’t built to depth.
- Edge pavers sliding outward. The edge restraint has failed or was never pinned. Once the edge gives, the field loosens from the outside in.
- Weeds and moss creeping through joints. A sign the joint sand is gone and water is pooling. Moss in a Lancaster driveway usually means shade plus trapped moisture, a fixable drainage issue.
Every one of these comes back to base, drainage, or restraint. New pavers laid over a bad base fail the same way in a season. That’s why we look under the grade before we quote the surface.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s what the work runs in Lancaster, so you can price it before you commit. These ranges cover labor, materials, base prep, and haul-off.
| Service | Installed Range |
|---|---|
| Paver driveway installation | $7,000 – $18,000 |
| Concrete driveway installation | $4,500 – $12,000 |
| Driveway replacement | $5,000 – $14,000 |
| Driveway sealing | $250 – $700 |
| Paver patio installation | $3,500 – $11,000 |
What drives the range: driveway square footage, how deep we excavate to reach solid base, whether the old surface needs full removal, drainage corrections, and whether you go genuine Wellborn or equivalent. The quote is line-itemized. Parts and labor are shown separately so you can see what the material costs. If the base turns out worse than inspection showed, you get a written change order before anyone moves on it. No allowance surprises at the end. The finished work carries our written 90-Day Done Right Promise.
DIY or Call Us?
There’s real value in knowing your own driveway, and a few things you can safely check. Walk the run and mark the pavers that rock. Rake back a little joint sand to see how much has washed out. Look at the edge restraint for pavers pushing outward. Lift one loose paver and measure thickness and footprint so you know the size to match. That’s useful information.
Where DIY goes wrong: re-bedding and re-setting pavers looks simple and goes sideways fast once the base is soft underneath. Getting base compaction and depth right for Lancaster’s soil is the whole game, and a hand-tamped paver over loose dirt settles again within a season. Edge restraint has to be pinned right, and the grading that sheds water has to be worked before the surface goes down. Skip that and you’ve paid for the same failure twice. If you want it set right and backed, call us at (888) 427-1810 for a free estimate.
FAQs
A properly built paver driveway in Lancaster’s climate should hold 25 to 30 years or more, with resealing every 3 to 5 years to protect the joints. The surface pavers are rarely the weak link. Service life comes down to base depth, drainage, and edge restraint, which is where we focus the build so the driveway stays put through our hot summers and monsoon runoff.
Often yes. A limited area of settling, a failed edge, or washed-out joints can be repaired by lifting the affected pavers, correcting the base and restraint, and resetting them. If the failure is widespread or the base is gone across the whole run, replacement is usually the better money. We tell you which one it is in writing, and if a repair will do, we say so. Call (888) 427-1810 and we’ll look before we quote.
A targeted repair is usually a short job, done in a day or two depending on how much base work is needed. A full paver driveway installation in Lancaster typically runs several working days, more if there’s substantial removal and grading. We give you the schedule in writing with the quote so you know what to plan around, and permits are pulled and inspections signed where the job needs them.
We measure your existing pavers and match thickness, footprint, joint width, and color, whether that means genuine Wellborn components or a quality equivalent that fits the same run. We can’t carry parts on a truck and don’t claim to, because every driveway is measured for its own job. The sourcing decision is written out for you before we order, so you approve the material, the cost, and the color match first.
When the driveway starts talking, it’s the base and the details that get it right, and that’s the work we do. Barrett & Sons Construction has been owner-operated from the start, we pull the permits, and every price change is on paper before it happens. Whether you’re matching a Wellborn run or protecting a Belgard or Techo-Bloc hardscape, we install brands you can look up. We also work with KraftMaid, Cambria, and Silestone on the interior side, but today it’s your driveway. Call (888) 427-1810 for a free estimate, and ask about the 10% Senior & Veteran discount, $40 off any repair over $200, and free second opinion on any written estimate.
Written by the team at Barrett & Sons Construction Lancaster, serving Lancaster and nearby areas.