Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Dvele Construction in Burbank, CA | Barrett & Sons Construction Lancaster
Barrett & Sons Construction Lancaster provides independent Dvele service across Burbank, from ADU builds and home additions to full kitchen remodels and roof replacement. What makes our Dvele work different here is simple: we understand the panelized wall and floor cassettes, the factory-set MEP chases, and the finish tolerances Dvele’s modular system ships with, and we work on Burbank’s tight ranch lots without any affiliation to the factory. Call (888) 427-1810 for a free estimate.
Why Burbank Residents Choose Us for Dvele Service
Dvele homes are built to a factory spec, and most contractors in Burbank have never opened one up. We have. As an Dvele service provider working independently, we’ve spent time learning how Dvele’s off-site-built shell moves, where it seals, and where it doesn’t. That familiarity matters on a modular home. The cassette joints, the continuous exterior insulation, the triple-glazed window units, the solar-and-battery-ready roof and electrical package – these are engineered assemblies, not standard stick-frame work.
We source OEM-compatible parts to spec. Where a component is proprietary, we match the original. Where it’s standard (roofing, gutters, fixtures, cabinetry), quality aftermarket is honest and often the better long-term value, and we’ll say so. Our technicians have up to 28 years of experience, and we schedule promptly across the Burbank service area, covering ZIP codes 91510, 91521, 91522, and 91523. Every price change arrives as a written change order before work moves, and every completed job carries the written 90-Day Done Right Promise.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Dvele Construction Problems We Solve in Burbank
These are the recurring issues we see on Dvele homes in Burbank, tied directly to the local climate and building stock.
- Stucco and paint breakdown on low-slope roof transitions. San Fernando Valley sun and heat hit Dvele’s flat, low-slope modular roof transitions hard, and factory seam flashings collect debris and degrade faster than the assembly was designed for. We re-flash to spec and confirm the roofing assembly is watertight.
- Condensation at cassette-to-cassette joints. When later penetrations happen – mini-split lines, solar conduit – the factory gasket and tape seals get disturbed, and thermal bridging shows up as interior drywall staining on the north wall. We trace the break in the seal and restore the joint detail.
- Settlement and racking at the marriage line. Dvele modules join at a marriage line, and on Burbank’s shallow slab or pier-and-beam sites that joint moves. You get cracked drywall corners and door frames that jam near the joint, often after a hot summer.
- Roof and gutter performance in Santa Ana wind and ember events. The engineered roof-to-wall connection and vent detailing on a modular shell need verified defensible-space clearance on foothill-edge lots near the Verdugo Mountains. Wind-driven debris tests every vent boot.
- MEP chase access on remodels. Adding a kitchen or bath on a Dvele plan runs into the factory-routed plumbing and electrical chases, which don’t line up with a conventional remodel’s rough-in. We plan chases before demo, not after.
Dvele Service in Burbank: What Local Conditions Mean for Your Equipment
Burbank is landlocked and fully built out. There are no new subdivision lots, so nearly every Dvele project here is an addition, an ADU, or a gut remodel on a 1940s – 50s ranch lot in the 91504 and 91506 tracts. Those lots carry a shallow slab or pier-and-beam foundation and original wiring that predates any modular system, and a Dvele shell has to be reconciled with all of it.
Start with the foundation, because a factory-engineered cassette system assumes a stable base. On Burbank’s postwar slabs and pier-and-beam sites, that base shifts with the soil and heat cycles, and the module marriage line takes the difference. The same lots sit close to active sound stages, where film-permit and residential noise windows push concrete pours and demo into narrow morning blocks. Burbank is a company town for the entertainment industry, and crews near the lots often can’t run loud equipment during shoot days. Plan the schedule around that, and the job runs clean.
Dvele Models & Products We Service in Burbank
We service Dvele’s factory-built single-family modular home with its panelized wall and floor cassette system, Dvele ADU and accessory dwelling unit modules, the high-performance envelope package with continuous exterior insulation and triple-glazed windows, and the solar-and-battery-ready roof and electrical package. On a Dvele home in Burbank’s postwar tracts, the recurring call is a hairline crack and a sticking door at the module marriage line, usually after a hot summer. A qualified local pro typically opens the drywall at the joint, checks the structural connector and gasket, verifies the foundation is stable, then re-seals and re-finishes the joint to the factory detail rather than just patching the paint. We don’t stock Dvele parts locally; we source to spec or a documented equivalent for each job.
See the difference
Before
After
Before
After
Before
AfterDvele Service Pricing in Burbank
What drives cost on a Dvele job in Burbank is the assembly, not the room. Opening a cassette joint, re-flashing a low-slope transition, or planning around factory MEP chases all take more care than opening stick frame. Here are the ranges we work from:
| Service | Typical Range |
|---|---|
| ADU Construction | $90,000 – $220,000 |
| Home Addition | $45,000 – $130,000 |
| Full Kitchen Remodeling | $14,000 – $45,000 |
| Roof Replacement & Installation | $8,000 – $20,000 |
| Roof Repair | $400 – $1,800 |
| Standing Seam Metal Roof | $15,000 – $40,000 |
A free estimate includes a walk-through of the affected assembly, a written scope, and line-item allowances. Every price change arrives as a written change order before work touches the job. Call (888) 427-1810 for an exact quote; estimates are free.
Serving Burbank, CA – Our Local Coverage Area
We serve Burbank and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Dvele Construction in Burbank
No. We are an independent builder with no affiliation to Dvele. We’ve learned Dvele’s panelized wall and floor cassettes, factory-set MEP chases, and finish tolerances through field experience, and we work on Dvele homes in Burbank as an independent provider. Call (888) 427-1810 to talk through your project.
Yes. Dvele’s factory-routed plumbing and electrical chases follow the original plan, so a kitchen remodel has to be planned around them, not cut through them. We check chase locations before demo so the new rough-in lines up. Call (888) 427-1810 for a free estimate on your Burbank kitchen.
We match original spec or a documented equivalent on structural connectors, gaskets, sealants, and window and door units. Substituting cheap sealants at module joints is how the leaks start. For standard components like roofing and fixtures, quality aftermarket is honest, and we’ll tell you when a repair is the right call versus opening the assembly.
A marriage-line repair usually takes one to two days, roof re-flashing a few days, and an ADU build runs a full schedule. Burbank’s residential noise windows and film-permit adjacency can push concrete pours and demo into morning blocks, and we plan for that. Call (888) 427-1810 to get a timeline for your job.
Roof repair runs $400 – $1,800, roof replacement $8,000 – $20,000, a full kitchen remodel $14,000 – $45,000, and ADU construction $90,000 – $220,000. Cost depends on which assembly needs opening and how the foundation reconciles with the shell. Call (888) 427-1810 for an exact quote; estimates are free.
Service Areas Near Burbank
We also work on Dvele homes in Glendale, La Crescenta-Montrose, San Fernando, Santa Clarita, and Stevenson Ranch. The same modular shell, the same valley heat, and the same tight-lot ranch reality apply across the east San Fernando Valley, so the field experience carries over.
Book Your Dvele Service in Burbank Today
Whether it’s a marriage-line crack, a leaking roof seam, or an ADU you’re planning on a 91504 ranch lot, we’ll scope it in writing and price it before work moves. Call (888) 427-1810 to schedule your free estimate in Burbank.
Written by the team at Barrett & Sons Construction Lancaster.