A Barrett company - serving Lancaster, CA

Unilock Construction in Glendale, CA

Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Unilock Construction in Glendale, CA | Barrett & Sons Construction Lancaster

We provide independent Unilock construction service across Glendale, including paver driveways, patios, and segmental retaining walls built on hillside and flatland lots alike. The one thing that sets our Unilock work apart here: in Glendale’s hillside ZIPs, a retaining wall or sloped driveway is a drainage and slope-stability decision before it’s ever a finish selection. We treat it that way. Call (888) 427-1810 for a free estimate.

Call (888) 427-1810

Key Takeaways

  • We handle Unilock’s full hardscape system: pavers, retaining wall blocks, and permeable jointing.
  • We’re an independent installer network – not a Unilock-authorized or factory-certified dealer, and we say so plainly.
  • Glendale hillside lots often need drainage and engineering settled before a permit is issued.
  • Every eligible job gets permits pulled and inspections signed.

Why Glendale Residents Choose Us for Unilock Service

We know Unilock’s product family line by line – Brussels Block, Beacon Hill, Town Hall, U-Cara – because we’ve installed and repaired them long enough to know how each one behaves once it’s in the ground. That matters in Glendale. A Brussels Block paver driveway that’s perfect on a flat Lancaster lot can fail fast when the same units go on a slope above the 134 freeway. The block isn’t the problem. The base and drainage behind it are.

We source Unilock’s own pavers, wall units, and compatible joint sand and edge restraints to match color and dimension on every repair. No mystery blocks off a van. And our crew members carry up to 28 years of experience, so when a wall is bulging after winter rains, we know the difference between a spot repair that holds and a patch that moves again next season.

If you’re comparing installers, ask whether they’ll settle the drainage detail in writing before work starts. We do. Every scope, every allowance, every change order arrives on paper before a single unit goes down.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Common Unilock Construction Problems We Solve in Glendale

  • Hillside driveway pavers shifting and losing bedding sand. In the 91207 and 91208 hills, runoff concentrates hard at the slope transition. Where no underdrain was built, Brussels Block units lose their bedding and start to walk. We open the detail, correct the base, and rebuild only what moved.
  • Retaining-wall courses bulging or leaning. U-Cara and Brussels wall courses lean when winter rain saturates unmanaged clay-and-silt backfill against the face. Glendale’s seasonal rains find every weak drainage joint. The fix is correcting the backfill and drainage, not swapping blocks.
  • Efflorescence and surface staining. Glendale’s hard irrigation water plus dust from the dry Verdugo hillside brush leaves white bloom on Town Hall and Brussels pavers. It’s cosmetic, but it reads as age. We clean and re-sand with the right joint material.
  • Joint sand washout at aprons and slope toes. Fire-defensible-space clearance work and grading around a home often disturb installed edges, and the sand goes with them. We reset edge restraints and re-sand to spec.
  • Failed base under a paver patio. Patios on older Glendale lots sometimes sit over compacted fill that was never prepped for hardscape. When units settle unevenly, the honest fix is a rebuilt base section.

Unilock Service in Glendale: What Local Conditions Mean for Your Equipment

Here’s the local reality that shapes every Unilock job in Glendale: in the hillside ZIPs, a segmental retaining wall above a certain height isn’t just a hardscape purchase. It can pull in a geotechnical report and an engineered wall design under Glendale’s hillside ordinances before a permit is issued. That means the wall-block spec and the drainage detail have to be settled up front – not after the blocks are delivered. A flatland city a few miles away doesn’t carry that weight. A homeowner above the 134 in 91206 or up toward the San Rafael hills does. So the conversation starts with slope, soil, and drainage, and only then moves to whether U-Cara or Beacon Hill is the right wall system. Get that order wrong and you’re rebuilding a wall that passed inspection but couldn’t handle a wet January.

Unilock Models & Products We Service in Glendale

We work with the Unilock lines that show up most on Glendale properties:

  • Brussels Block – tumbled, dimensional paver for driveways and walkways.
  • Beacon Hill – flagstone-look retaining wall block.
  • Town Hall – traditional clay-brick paver, a good match for older Spanish Colonial and Craftsman frontages downtown.
  • U-Cara – segmental retaining wall system for taller, engineered walls on hillside lots.

On parts, we stay with Unilock’s own units and compatible joint sand and edge restraints for color and dimensional match. Mixing aftermarket blocks into an existing Unilock wall shows immediately. We don’t claim to stock Unilock parts locally – we specify what the job needs and source it for that job.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Unilock Service Pricing in Glendale

What you’ll pay depends on slope, drainage correction, and how much of the existing base is sound. Here are the ranges we work from:

Service Typical Range
Paver Driveway Installation $7,000 – $18,000
Paver Patio Installation $3,500 – $11,000
Driveway Replacement $5,000 – $14,000

Hillside work runs higher when a geotechnical report or engineered wall design is in play, because the drainage detail and base prep get more involved. A free estimate walks the lot, checks the existing base and drainage, and puts scope and allowance in writing. Call (888) 427-1810 for an exact quote – estimates are free, and we offer a free second opinion on any written estimate you already have.

Serving Glendale, CA – Our Local Coverage Area

We serve Glendale and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

FAQs – Unilock Construction in Glendale

Service Areas Near Glendale

Beyond Glendale, we work Unilock hardscape projects in Burbank, La Crescenta-Montrose, Santa Clarita, San Fernando, and Lancaster. If you’re near the foothills or the Antelope Valley, we can look at your lot. Our crews cover the Glendale service area and the towns around it.

Book Your Unilock Service in Glendale Today

Hillside driveway leaning or a wall shedding sand after winter rains? Call (888) 427-1810 for a free estimate. We’re an independent installer network working with Unilock’s full hardscape system, and we’ll settle scope and drainage in writing before work starts. A live person answers, day or night.

Written by the team at Barrett & Sons Construction Lancaster.

Need Construction help in Glendale? Licensed & insured · free written estimates
Call (888) 427-1810
Local Service Coverage

Request a Free Estimate in Glendale

Tell us what you need - Barrett & Sons Construction Lancaster responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch