Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Master Halco Construction in Burbank, CA | Barrett & Sons Construction Lancaster
We provide independent Master Halco service across Burbank: chain link, ornamental steel, and vinyl fence systems sourced directly from Master Halco and installed to manufacturer spec. We’re not affiliated with Master Halco and hold no authorization, partnership, or warranty endorsement from them, which is exactly what lets us spec the right line for your lot instead of whatever a dealer is pushing this month. The difference here in Burbank is post placement. Nearly every fence run lands on a shared line between two mid-century homes, and there’s no open ground to absorb a mistake. Call (888) 427-1810 for a free estimate.
Why Burbank Residents Choose Us for Master Halco Service
Burbank homeowners call us for two reasons: the material and the line. We work with real Master Halco galvanized chain link (residential 2-inch mesh, 11-gauge framework), Majestic-style welded picket panels, vinyl Privacy and Picket systems, and the gates and post-and-rail fittings that go with them. No mystery brands off a van.
Original fittings matter as much as the panels. Master Halco pipe, tension bands, and rail ends are built to a specific gauge and coating, and swapping in aftermarket parts from a different system loosens fabric and sags gates. We match OEM-compatible components whenever the existing frame is sound.
Response is the other half. Every job in Burbank gets a written scope before we touch a post, and every price change comes to you as a written change order before work moves a step further. Our crew members carry up to 28 years of experience and the Barrett & Sons name, and they’re background-checked and uniformed on every visit. You can look up my name, address, and license number yourself before you sign anything.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Master Halco Construction Problems We Solve in Burbank
- Sun-baked zinc coating on chain link. The east Valley’s dry heat and hard UV chalk galvanized fabric and caps years earlier than coastal LA jobs do. Pipe caps and tension bands start surface-rusting while the fabric still holds. We catch it at the fitting stage and replace the coated hardware before rust walks down the runs.
- Racked and sagging panels after Santa Ana gusts. Under-set posts and light-gauge top rail on Master Halco panels lean and buckle when ember-season wind slams a fully exposed backyard. On a tight Burbank lot, a run with shallow footings has nowhere to flex, so it goes sideways.
- Chain link sharing a footing with an old garage slab. Contractors auger and pour on Burbank’s shallow slab and pier-and-beam edges without checking the existing line. Posts end up crowding the slab edge and heave or lean within a couple of seasons. We pull the line and check what’s underground first.
- Mismatched aftermarket fittings. Tension bars and rail ends from a different gauge leave fabric loose and gates sagging on Master Halco pipe. The gauge and coating don’t match the original system, so nothing seats the way it should.
- Shrinking valley soil under decades-old posts. Dry Burbank soil pulls away from original concrete footings, and the whole line leans. Sometimes a re-set and re-tension fixes it. Sometimes it’s a replace in heavier gauge. Patching a racked run of rusted 11-gauge on failing footings just moves the failure two seasons out.
Master Halco Service in Burbank: What Local Conditions Mean for Your Equipment
Burbank is a landlocked, fully built-out grid, which means nearly every Master Halco fence or gate run lands on a shared property line between a 1940s ranch home and its neighbor. There is no open lot here to absorb a mistake. Post placement, survey verification, and setback calls matter more than the material itself. On a typical tight-lot Burbank property, a homeowner notices the chain link along the side yard leaning and the fabric sagging after a windy spring, usually because posts were set shallow decades ago and the dry valley soil has since shrunk away from the concrete. A qualified local installer pulls the line, checks the shared-property-line setback, re-sets posts to proper depth with fresh concrete, and either re-tensions the existing Master Halco fabric with correct bands and rail ends or replaces the run in a heavier gauge. The loud work gets timed around Burbank’s residential noise hours so demo and augering stay inside the allowed window. That’s the part that catches out-of-town crews: no neighboring city combines studio-adjacent film-permit logistics with a residential grid this tight, so the schedule is just as much a materials decision as the gauge is.
Master Halco Models & Products We Service in Burbank
We work on the full Master Halco residential range: galvanized chain link in 2-inch mesh with 11-gauge framework, ornamental steel in Majestic-style welded picket panels, vinyl Privacy and Picket systems, and chain link gates with post-and-rail fittings. We don’t claim parts on a truck or a local stockpile, because we don’t keep one. Every fitting gets sourced to the job. On a repair, that means OEM-compatible tension bands, rail ends, and post caps in the correct coating to match the existing frame. On a full replacement, it means quality aftermarket fabric sized to the new framework. That’s the honest split: the frame decides the parts, and the parts decide whether the fence holds. For the full picture across brands and trades, see our Master Halco service page.
See the difference
Before
After
Before
After
Before
AfterMaster Halco Service Pricing in Burbank
Here’s what these jobs run in Burbank. Vinyl fence installation lands between $3,500 and $9,000. Aluminum fence installation runs $4,000 to $10,000 depending on height, panel count, and gate hardware. Garage conversion, when a homeowner is reworking the back of the lot around a new fence or ADU pad, runs $30,000 to $80,000. Post depth, shared-line survey work, wind exposure, and whether we’re re-tensioning an existing Master Halco frame or replacing the run drive the number.
A free estimate includes a line to the property line, a gauge and coating check on any existing framework, and a written scope with allowances spelled out. Free second opinion on any written estimate you already have. No trip charge inside the county. Permanent 10% senior and veteran discount. Call (888) 427-1810 for an exact quote – estimates are free.
| Service | Typical Burbank Range |
|---|---|
| Vinyl Fence Installation | $3,500 – $9,000 |
| Aluminum Fence Installation | $4,000 – $10,000 |
| Garage Conversion | $30,000 – $80,000 |
Serving Burbank, CA – Our Local Coverage Area
We serve Burbank and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Master Halco Construction in Burbank
Yes, in most cases. If the framework is sound, a leaning post or torn fabric section is a repair: we re-set the post to proper depth, swap in the right tension bands and rail ends, and re-tension the fabric. We only recommend a full replace when the run is racked, rusted through 11-gauge, and sitting on failing footings. Call (888) 427-1810 and we’ll look at it before you commit to anything.
Yes. Burbank enforces strict residential noise hours, and on blocks near the studios a shoot day can shut down loud equipment entirely. That pushes demo, augering, and concrete pours into narrow morning windows, so we plan the schedule around the allowed hours rather than fighting them. Call (888) 427-1810 to talk through timing for your block.
They can, if the posts aren’t set deep enough. Vinyl panels are light and catch a lot of wind, so shallow footings and light top rail rack and sag when ember-season gusts hit an exposed backyard. We set posts to proper depth for the exposure and spec heavier framework where the yard is wide open. Call (888) 427-1810 for a free estimate.
Pull the survey first. On Burbank’s landlocked lots, a fence almost always shares a line with a neighbor’s 1940s ranch home, and there’s no open ground to absorb a mistake. We read the survey, verify setback, and set posts from that line, not from the old fence’s lean. Call (888) 427-1810 and we’ll walk it with you.
It depends on exposure and how much privacy you want. Ornamental steel in Majestic-style welded picket panels handles wind and heat far better and lasts longer under Burbank sun. Vinyl Privacy gives you a solid screen but needs deeper posts where wind loads are high. We’ll tell you straight which one fits your lot. Call (888) 427-1810 for a free estimate.
Service Areas Near Burbank
We serve homeowners across the Burbank service area and out to neighboring towns like Glendale, La Crescenta-Montrose, San Fernando, Santa Clarita, and Castaic, plus Lancaster and Quartz Hill. Wherever you are on that stretch of the Valley, the crew shows up with the same written scope.
Book Your Master Halco Service in Burbank Today
Call (888) 427-1810 for a free estimate on your Master Halco fence or gate. Every eligible job gets permits pulled and inspections signed, every price change in writing, and the 90-Day Done Right Promise on the contract – if it’s not done right, give me one call and I’ll come back.
Written by the team at Barrett & Sons Construction Lancaster.