A Barrett company - serving Lancaster, CA
M

Mr-Glass Construction Service in Lancaster, CA

Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Why Lancaster Homeowners Choose Mr-Glass Construction

We provide independent Mr-Glass construction service in Lancaster: frameless shower enclosures, sliding and Neo-Angle units, and custom tempered glass and mirrors, installed and repaired by crews who work with these products regularly. What makes our Mr-Glass work different is the measurement tolerance and hardware knowledge a specialty installer brings. We are an independent service provider. Barrett & Sons Construction Lancaster is not affiliated with or authorized by Mr-Glass, and we don’t imply otherwise. What we do is match the right enclosure to your actual bathroom layout instead of forcing a single catalog SKU. Call (888) 427-1810 for a free estimate.

Call (888) 427-1810

Why Trust Barrett & Sons Construction Lancaster for Your Mr-Glass Construction?

Our technicians have up to 28 years of experience, and much of that time has been spent on glass and bath enclosure work where a millimeter decides whether a door swings clean or drags on the curb. We know the Mr-Glass frameless hinged doors, the bypass sliding units, and the Neo-Angle corner enclosures, and we know which hinge sets, seals, and bottom sweeps fit each one. When an OEM part is available, we order it. When a proprietary part has been discontinued, we source exact-fit stainless hardware that holds up in Lancaster’s climate.

Warranty-safe service means we don’t do anything to your panel that the manufacturer’s specs wouldn’t allow. We don’t drill a tempered panel outside its engineered tolerance. We don’t shim a hinge into drywall anchors where the wall needs blocking. If a Mr-Glass panel is chipped at a hinge or edge, we say so plainly rather than sealing over it and hoping.

Every scope arrives in writing, every change order is signed before work moves, and permits are pulled and inspections signed on every eligible job. That matters on tub-to-shower conversions, where drain relocation and waterproofing are inspected. The permit inspector works for you, not for us.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Common Mr-Glass Construction Problems We Fix in Lancaster

  • Frameless hinged doors that sag and drag. The usual cause is undersized hinges or hinges anchored into drywall instead of proper blocking. Over several years of daily use, the hinge wears and the panel drops just enough to catch the curb. On Lancaster’s expansive clay soils, a slab that shifts a few millimeters can throw a previously square opening out of alignment, which makes an already-tired hinge fail faster.
  • Water leaking at the curb and wall junction. This shows up when the enclosure sits on an out-of-level pan or one that wasn’t waterproofed properly before tile went down. The glass and seals are often fine; the water is finding the gap at the wall and curb. We check the pan before we blame the enclosure.
  • Glass-edge chipping and seal failure. Tempered panels that were cut or drilled to the wrong tolerance will chip at the edge, and once a tempered edge chips, the panel can shatter without warning. This is why we measure to the opening, not to the old door.
  • Hazed glass from mineral and soap buildup. Lancaster water runs hard, and the Antelope Valley’s dry, dusty air means dust settles on wet glass and bonds with soap film. Bottom sweeps and squeegees wear out first, and once they stop wiping, the haze sets faster.
  • Hardened sweeps and worn seals. The clear vinyl sweep along the bottom of a Mr-Glass bypass door is the first part to go. When it hardens, water escapes under the door and the track corrodes. It’s a small part with a big effect on how long the enclosure lasts.

Mr-Glass Parts & Our Repair-vs-Replace Approach

We use Mr-Glass OEM or exact-fit hinge sets, seals, and sweeps where we can get them. Where a proprietary part is discontinued, quality aftermarket stainless hardware is a sound substitute and often outlasts the original. We don’t claim local stock; parts are ordered per job once we’ve measured. That’s the honest way to run it.

Repair versus replace comes down to the glass. Worn hinges, a hardened sweep, a failed seal, a slightly out-of-level curb: those are repair jobs, and they’re worth doing. A tempered panel chipped at a hinge or along an edge is a replacement. It can’t be safely repaired, and sealing over a chip is a bet nobody should take.

A common Mr-Glass call is a frameless hinged shower door that’s started dragging and leaking at the bottom after several years of use. The usual cause is worn hinges or a bottom sweep that’s hardened, sometimes combined with a slightly out-of-level curb. A qualified local pro typically checks the glass for edge chips, replaces the hinge and seal hardware, re-levels and re-seals the enclosure, and recommends full replacement only if the tempered panel is damaged. Call (888) 427-1810 for a free estimate on your Mr-Glass enclosure.

Our Mr-Glass Service Process – Step by Step

  1. 1
    Diagnosis. We look at the glass first: edge chips, hinge wear, sweep condition, and whether the curb is level. We check the pan and wall junction for the source of any leak, because water at the base rarely comes from where it looks.
  2. 2
    Repair or install, in writing. You get a written scope with the exact hardware and panel dimensions before anything is ordered. If a change comes up mid-job, it arrives as a written change order before work proceeds.
  3. 3
    Test. On a new or repaired enclosure, we run water at the shower head and check the curb, wall junction, and door sweep. A door that swings clean and a floor that stays dry are the only acceptable results.
  4. 4
    Warranty and follow-up. Every completed job is backed by our written 90-Day Done Right Promise. If something’s not right, one call brings us back. We’re local and we answer our own phone.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Mr-Glass Products We Service & Install in Lancaster

We work with the full Mr-Glass enclosure range: frameless hinged shower doors, sliding and bypass enclosures, Neo-Angle corner units, and custom-cut tempered glass panels and mirrors. On the installation side, that includes walk-in showers built around a frameless Mr-Glass panel, tub-to-shower conversions where the old tub deck comes out and the enclosure has to fit a new opening exactly, and mirror and glass panel work.

Lancaster’s high-desert sun and dust are hard on glass and hardware. UV fades seals, wind-driven dust bonds to wet surfaces, and hard water leaves mineral film. Choosing the right glass thickness and hardware for the exposure is part of the job, not an upsell.

We Also Service These Brands

We’re multi-brand, not single-brand dependent. Alongside Mr-Glass enclosures, Barrett & Sons Construction Lancaster installs KraftMaid cabinetry, Cambria and Silestone countertops, and Kohler fixtures. That means one crew can take a Lancaster bathroom from demo through a finished Mr-Glass frameless shower, new vanity, and counter without handing you off between trades.

FAQs – Mr-Glass Construction Service in Lancaster

Is Barrett & Sons Construction Lancaster authorized by Mr-Glass? No. We are an independent Mr-Glass service provider and not affiliated with or authorized by the manufacturer. We work with Mr-Glass products because we know them well, and we’re free to recommend the right enclosure for your layout rather than a single SKU.

Do you use genuine Mr-Glass/OEM parts? Yes, where they’re available. We order Mr-Glass OEM or exact-fit hinge sets, seals, and sweeps for each job. When a proprietary part has been discontinued, we use quality aftermarket stainless hardware that meets or exceeds the original.

How long does Mr-Glass service take? A hardware repair like a hinge or sweep replacement is typically a short visit. A full enclosure installation or tub-to-shower conversion runs longer because of waterproofing, tile, and cure time. You’ll get a written timeline with your scope before work starts.

What Mr-Glass models/series do you cover? We cover frameless hinged shower doors, sliding and bypass enclosures, Neo-Angle corner units, and custom-cut tempered glass panels and mirrors. If you have a model number, bring it; if not, we measure the opening.

Will service void my Mr-Glass warranty? Proper service shouldn’t. We follow manufacturer specs on drilling, hinge anchoring, and panel handling. If a part is under warranty, we tell you before we touch it.

Can hard-water haze on Mr-Glass panels be removed, or does the glass need replacing? Mild haze from soap and minerals usually comes off with the right cleaner and a fresh sweep, so the panel stays. Deep etching that’s clouded the glass surface can’t be polished out, and replacement is the honest answer. Call (888) 427-1810 for an exact quote; estimates are free.

How much does Mr-Glass construction cost in Lancaster? Typical ranges are below. These depend on glass thickness, hardware, and whether the pan or curb needs work. Call (888) 427-1810 for an exact quote; estimates are free.

Mr-Glass Service Typical Range in Lancaster
Walk-In Shower Installation $4,500 – $12,000
Tub-to-Shower Conversion $3,500 – $10,000
Shower Replacement $3,000 – $8,500
Small Bathroom Remodel $5,000 – $12,000

Book Your Mr-Glass Service in Lancaster, CA

If you’ve got a Mr-Glass enclosure that’s leaking, dragging, or hazing, or you’re planning a new frameless shower in Lancaster, call (888) 427-1810. We’ll come out, look at the glass and the pan, and give you a written estimate with the hardware and dimensions spelled out. Permits pulled where they’re required, and our 90-Day Done Right Promise on every completed job. Estimates are free.

Written by the team at Barrett & Sons Construction Lancaster.

Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 427-1810
Local Service Coverage

Request a Free Estimate in Lancaster

Tell us what you need - Barrett & Sons Construction Lancaster responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch