Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Fast, Reliable Fence Installation Across Glendale
If you’re pricing a new fence on a Glendale lot and want a straight answer on cost and permits before anyone shows up, call (888) 427-1810. We’re Barrett & Sons Construction, and our crews install wood, vinyl, chain link, aluminum and iron fencing across Glendale, from the bungalows near downtown to the hillside parcels above the 134. Fence work in this city is not flatland work. A lot in 91208 that looks simple on a plat map can hide a grade, a setback question and a drainage problem under the same run of posts, and that changes both the price and the plan. We scope every one of those before a quote goes out.
Why Barrett & Sons Construction Lancaster Is Glendale’s Preferred Fence Installation Company
We’ve been doing this since 1998, owner-operated the whole way, and our crews have up to 28 years of experience between them. Glendale homeowners tend to come to us after a bigger outfit quoted one number on the phone and handed over a different invoice at the door. We don’t work that way. Every scope, every allowance and every price change lands on paper in a written change order before a single post goes in the ground. The permit inspector works for you, not for us, and that’s exactly why we like him; we pull permits and get inspections signed on every eligible job in Glendale.
Our reputation in Glendale is built on the boring stuff: showing up when we said, putting the line where the survey says, and answering the phone with a live person 24 hours a day, seven days a week. Not a voicemail box, not a call center three states away. Tom Barrett publishes his name, his address and his license number, so you can look it up before you sign anything. If something’s wrong after the job, one call brings Tom back under our written 90-Day Done Right Promise. And when we quote a Glendale fence, we quote it in writing with line items you can read.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Our Fence Installation Services in Glendale
Most fences in Glendale fall into four families, and each one behaves differently on a slope, in the fire-severity zones up the Verdugo hills, and against a 1920s property line that may not match the county records. Here’s how we handle each. If what you’re after is a specific style or a repair rather than a full run, our Fence Installation team covers every type we install.
Wood Fence
Wood is still the most common fence in Glendale, and for good reason: it fits the Spanish Colonial and Craftsman houses near downtown in 91201 and 91203, and it takes stain to match whatever’s already on the property. The catch on a hillside lot is that wood is unforgiving of a footing that’s too shallow. We size footings for the grade, not for flat ground, and set posts in properly cured concrete so the downhill run doesn’t lean after the first winter rain.

Chain Link Fence
Chain link makes sense for larger Glendale parcels, side yards off the 134, and anything with a rear lot line crews have to reach. The material cost is the lowest of anything we install, and it holds up well to the dust and dry brush above the city. If your parcel runs long and open, chain link often gets you a full perimeter for a fraction of what wood or vinyl would cost.

Vinyl Fence
Vinyl is the low-maintenance choice, and it’s popular in Glendale partly because it won’t need repainting year after year. It’s also a good match where fire-severity rules push homeowners away from combustible material tight to the structure. Vinyl fence installation in Glendale runs $3,500 to $9,000 for a typical residential run, and the panels handle sun and seasonal rain better than wood if the footings are right.

Aluminum Fence
Aluminum gives you the look of wrought iron without the rust, and it’s what we install most often where a Glendale homeowner wants a clean front-yard boundary or a pool enclosure. Aluminum fence installation in Glendale runs $4,000 to $10,000 for a standard run, and it holds color well in full sun. Gates match the panel style, so the whole line reads as one design.
Trusted Brands We Service in Glendale
We don’t carry parts on a truck or stock brands in a warehouse, so we’re not tied to whatever’s sitting in inventory. That means you get the material you actually asked for, and we can source premium brands like Boral, PGT, CGI and CWS when the job calls for it. Fast turnaround depends on getting the scope right first, so we size the footings, resolve the alignment and confirm access before any order goes out. What you get in writing is what shows up on site.
See the difference
Before
After
Before
After
Before
AfterCommon Fence Installation Problems We See in Glendale Homes
The failures we see in Glendale aren’t random. They cluster around a handful of causes, and most of them come down to what wasn’t checked before the first post went in.
- Posts footed for flat ground. On an unretained hillside grade in the 91206 or 91207 ZIPs, a post set too shallow in fill soil will lean or heave after seasonal winter rain. The fix is footing depth set to the engineered requirement, not to a standard flat-lot depth.
- A fence line placed without a survey check. On large or open Glendale parcels, a run set without confirming property and setback alignment can force a full redo after a survey. We resolve the line before we quote, not after.
- Fire-severity-zone rules ignored. Above Glendale, the dry, brush-covered Verdugo and San Rafael hills sit in high fire-severity zones. Wood fencing built tight to the structure, or combustible material stacked against defensible space, can fail review and need to come down.
- Material and equipment access left unscoped. Crews can’t reach a rear lot line on a big or sloped parcel if no one planned for the haul. That stalls the job mid-install, and the price of an easy run climbs fast.
Pricing for Fence Installation in Glendale, CA
A typical fence installation in Glendale runs $3,500 to $9,000 for a residential job, with the range set largely by material, run length and how much site work the lot demands. A flat side yard near downtown quotes much lower than a hillside lot in 91208 that needs deeper footings, a graded line and a drainage path. Here’s how the two main material families price out.
| Fence Type | Typical Glendale Price |
|---|---|
| Vinyl Fence Installation | $3,500 – $9,000 |
| Aluminum Fence Installation | $4,000 – $10,000 |
Wood, chain link and iron fence runs price on the same logic, and we give you the line items in writing with a free estimate. If a price change comes up during the job, it arrives as a written change order before any work moves. Estimates are free, and so is our free second opinion on any written estimate you’ve already got.
We Also Serve Cities Near Glendale
Fence work around the Verdugo hills spills across city lines, and we serve homeowners in Burbank, La Crescenta-Montrose, La Cañada Flintridge and Pasadena on the same terms we offer in Glendale. The hillside conditions, fire-severity zones and county-versus-city permitting questions all carry over. Call (888) 427-1810 and we’ll tell you exactly what a fence on your parcel needs.
Serving Glendale, CA – Our Local Coverage Area
We serve Glendale and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Fence Installation in Glendale
Often yes. Glendale hillside lots in the 91202, 91206, 91207 and 91208 ZIPs frequently trigger geotechnical review and retaining-wall scrutiny under the city’s hillside ordinances, and a fence line on a graded, engineered alignment can require footing and spacer review before installation. Because those conditions get resolved before any materials are ordered, a fence here is often an engineered alignment, not a straight run over flat dirt. Call (888) 427-1810 and we’ll walk you through what your lot likely requires; estimates are free.
On larger or open parcels, a fence line has to clear the septic system and well setbacks before it can be placed, and running a boundary through a drainfield or too close to a well is a costly mistake. We confirm those setbacks on the survey and the site plan before we take a measurement, so the line lands where it’s legally allowed. Call (888) 427-1810 to schedule an estimate and we’ll check the setbacks with you.
It changes the price because a crew that can’t reach a rear lot line can’t install the fence. On a long or sloped Glendale parcel, a haul that runs hundreds of feet up a grade, or an access point too tight for equipment, adds labor and time that a flat, open lot never sees. We scope access and grading before quoting so the number you get includes it. Call (888) 427-1810 for a written estimate that covers the whole job.
Scope, allowance, footing depth, drainage plan and any price change should all be in writing before the first post goes in. An allowance that isn’t on paper is a surprise waiting for a date, and we won’t touch a job without a written change order on file. Every eligible Glendale job also gets its permits pulled and inspections signed, and every completed job is backed by our written 90-Day Done Right Promise. Call (888) 427-1810 to get your scope in writing; estimates are free.
It can. The dry, brush-covered Verdugo and San Rafael hills above Glendale sit in high fire-severity zones, and combustible material tight to the structure or stacked against defensible space can fail review. That pushes some homeowners toward non-combustible fencing like aluminum or iron near the home, and toward keeping the wood run well clear. Call (888) 427-1810 and we’ll tell you which material fits your lot and your zone; estimates are free.
If you’re ready to price a fence on a Glendale lot, call Barrett & Sons Construction at (888) 427-1810 for a free estimate. We’ll walk the line with you, check the grade and the setbacks, put the scope in writing, and tell you the honest number before anyone digs a hole.
Written by the team at Barrett & Sons Construction.