Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Fast, Reliable Fence Installation Across Burbank
If you live in Burbank, you already know the sun here does not let up. Fences that look fine on the day they go in start cupping, splitting and shedding hardware three or four summers later, and the bracket that rusted out first is almost always the cheap one. Barrett & Sons Construction installs fences built for the east San Fernando Valley, not for a coastal suburb with a different climate. We work all over Burbank, from the flat ranch blocks in 91504 to the tighter lots below the Verdugo foothills, and a free estimate usually gets scheduled within a few days. Call (888) 427-1810 and we will walk your property line with you.
Why Barrett & Sons Construction Lancaster Is Burbank’s Preferred Fence Installation Company
Burbank homeowners have been burned by the big outfits – one price on the phone, a different one at the door, and a crew that rotates through like strangers. We run the other way. Tom Barrett founded this company in 1998, his sons are on-site most days, and every price change comes to you as a written change order before anything moves. That matters on a fence line, where the ground under your property almost never matches the drawing.
The company is licensed and insured, every eligible job gets permits pulled and inspections signed, and every completed fence is covered by our written 90-Day Done Right Promise. Our technicians have up to 28 years of experience, and they carry the Barrett & Sons name on every visit. You can look up Tom’s license number and address yourself before you sign anything – we publish both on purpose.
We know Burbank’s blocks well. The 1950s ranch lots in the Rancho and Media District areas put fences within a few feet of a neighbor’s wall, which means footings, sprinkler lines and shallow slab edges nobody documented. We locate first and pothole at each post instead of trenching blind. Calls reach a live person 24 hours a day, not a voicemail box.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Burbank Fence Problem Is Sun and Wind, Not Salt Air
Here is what makes fence work in Burbank different from what you’ll read on most contractor sites. Burbank sits behind the Hollywood Hills in the east San Fernando Valley, so the enemy is ultraviolet light and Santa Ana wind events, not coastal salt. That single fact changes which materials hold up and which ones fail early. On the streets that climb toward the Verdugo Mountains, the same fence line often falls inside an ember-exposure zone, where wood and vinyl stop being a privacy question and become part of your defensible space. Above the valley floor, sun exposure runs hotter and more constant than anything near the coast, and hardware pays for it first.
On a typical 1950s ranch lot, the property-line or privacy fence stands only a few feet from the neighboring wall. Installers hit footings, irrigation lines and shallow slab edges that were never put on paper. Along older blocks near the studios, concrete set-posts can only be drilled or poured inside narrow morning windows before film-permit noise limits take hold. A qualified crew walks the line, calls the utility locate first, and hand-digs or potholes at each post rather than trenching. It specs galvanized or stainless post anchors and sealed hot-dip or powder-coated hardware instead of the electroplated brackets that rust solid after a few valley summers. That difference is the whole job.
Our Fence Installation Services in Burbank
Wood Fence Installation in Burbank
Wood is still the most common fence material on Burbank’s mid-century lots, and it is the one that needs the most thought about sun. A wood privacy fence here is working against relentless San Fernando Valley exposure: pickets dry, cup and split, and post bases rot where sprinkler runoff pools. We set posts for drainage, not just depth, and we choose species and finish for sun rather than price alone. For a lot in 91505 or 91502, that often means the difference between ten good years and twenty.

Privacy Fence Installation in Burbank
On the tight blocks near the studios, privacy is the number one reason people call. A 6-foot wood or vinyl privacy fence along a shared line has real value here, but it also has real constraints. Setback rules differ by lot, and on foothill-edge properties near the Verdugo Mountains, an all-wood privacy run may need a noncombustible section near the structure. We map that out before we quote so the fence does what you want and still holds up to inspection.

Fence Gate Installation and Repair in Burbank
Gates are where cheap hardware shows itself first. Electroplated hinges and latches seize within a few intense-sun summers, and a gate that drags or sticks is the complaint we hear most from Burbank homeowners replacing a builder-grade install. We hang gates on hot-dip galvanized or stainless hardware, brace them properly, and set the post in concrete deep enough that it does not lean after the first Santa Ana wind event.

Chain Link and Aluminum Fence Installation in Burbank
For driveways, side yards and pool enclosures, chain link and aluminum do a solid job in Burbank when they are specced for sun. Aluminum in a powder-coated finish holds its color far longer than raw metal here. Chain link with galvanized posts and rails stays serviceable through decades of valley heat. We size posts and spacing for the wind exposure on your specific block, not a one-size chart.
Trusted Brands We Service in Burbank
We install premium materials from brands you can look up yourself, including Boral and PGT for fence components and gates. If you already have a brand in mind, we will work with it. If you need a recommendation, we will tell you honestly which finish and hardware spec performs in Burbank’s sun. We don’t claim to stock parts locally, but we source quickly and keep turnaround tight on standard runs. Call (888) 427-1810 to talk through what fits your fence line.
See the difference
Before
After
Before
After
Before
AfterCommon Fence Installation Problems We See in Burbank Homes
- Rusted brackets and seized hinges. Electroplated or zinc-plated post brackets and gate hinges rust and lock up within a few intense-sun valley summers. The fix is hot-dip galvanized or stainless hardware, spec’d on the quote, not swapped in later.
- Cupping and splitting wood. Pickets and rails on Burbank privacy fences dry, cup and split under relentless San Fernando Valley sun. Post bases also rot where sprinkler runoff pools against them, which is why drainage at the base matters as much as the wood itself.
- Defensible-space gaps near the Verdugo foothills. Vinyl or wood fencing is often left out of the wildfire plan on ember-exposed foothill-edge lots. Fence material is part of defensible space, and we plan the run around that rather than pretend it doesn’t apply.
- Hidden underground surprises. Old footings, irrigation lines and shallow slab edges run under tight property lines on 1940s and 1950s lots. We pothole at each post location so nobody is guessing once the digging starts.
Pricing for Fence Installation in Burbank, CA
We quote from the real line, not a phone estimate. A typical fence installation in Burbank runs $3,500 – $9,000, and where you land depends on run length, material, gate count and how much the ground surprises us. Two line items we quote most often in this market:
| Service | Typical Burbank Range |
|---|---|
| Vinyl Fence Installation | $3,500 – $9,000 |
| Aluminum Fence Installation | $4,000 – $10,000 |
The coastal-spec version of a fence job and the inland-spec version differ by hundreds of dollars up front, and the cheap spec costs far more within a decade when the hardware rusts out and the wood fails. Every price change arrives in writing before a nail moves. Call (888) 427-1810 for a free estimate; the quote is line-item, and the estimate itself is free.
We Also Serve Cities Near Burbank
We work a wide arc around Burbank, including Glendale, La Crescenta-Montrose, La Cañada Flintridge and Pasadena. The sun, wind and ember-exposure issues we handle in Fence Installation in Burbank extend into the foothill towns above the valley. If you are nearby, ask us about your block. Our Fence Installation team can answer for surrounding areas too.
Serving Burbank, CA – Our Local Coverage Area
We serve Burbank and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Fence Installation in Burbank
Because Burbank’s film production zones bring noise-ordinance and shoot-day limits, and concrete set-posts or demo can only run inside narrow morning windows on blocks close to the lots. We build the schedule around that so we are not shut down mid-pour. Call (888) 427-1810 to talk through timing for your block.
Yes, on ember-exposed foothill-edge lots it can be, and a wood or vinyl fence run should be part of your wildfire plan rather than left out of it. We review the run and may recommend a noncombustible section near the structure. Call (888) 427-1810 and we will walk the line with you.
Insist on hot-dip galvanized or stainless post anchors and hinges, and sealed or powder-coated finishes over electroplated brackets. The cheap electroplated hardware rusts and seizes within a few valley summers. Call (888) 427-1810 for an estimate with the hardware spec written in.
Many fence runs here require a permit, and where one is required we pull it and get the inspection signed. That adds a step to the schedule but protects you at resale and keeps the build legal. Call (888) 427-1810 and we will tell you what your specific fence line needs.
It should name the risk and put the remedy in writing before digging starts – utility locate, potholing at each post, and a written change order for any surprise. Our quotes work that way. Call (888) 427-1810 for a free estimate and a written scope.
Whether you are replacing a failing privacy run near the Media District or putting up a new fence on a 91504 ranch lot, the first step is a free, line-item estimate. Barrett & Sons Construction is licensed, insured, and backed by our written 90-Day Done Right Promise, with permits pulled and inspections signed on every eligible job. Call (888) 427-1810 today and we will get your estimate on the calendar.
Written by the team at Barrett & Sons Construction.