Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cover Driveway & Pavers: The Lancaster Owner’s Guide
Cover driveway and paver surface repair in Lancaster typically runs $250 to $2,500 depending on what failed, and a full paver or concrete surface replacement installed by our crews lands between $4,500 and $18,000. Most Lancaster homeowners call us after the same thing: a slab that cracked along a control joint after a wind-blasted summer, or pavers that lifted and loosened once the desert temperature swing pulled the soil out from under them. The part itself is rarely a small bolt-and-bracket item – on paving it’s a panel section, a paver course, or a surface course that has to be matched and re-laid. We install driveway and paver surfaces that fit modern residential construction demands on an independent basis; we are not affiliated with Cover, and we don’t claim to stock parts on a truck. What we do is source materials, pull permits where required, and install the repair so it holds through another Lancaster summer.
Which Cover Models This Applies To
Driveway and paver surfaces aren’t model-specific like a garage door spring or a window sash; the surface is built to meet the slab or base subgrade and the site’s grading, not a factory part number. So “matching the Cover model” for a driveway means matching the surfaced product, thickness, and finish to what’s already on your property. Identify what you have before you call. Look for a stamped logo or edge profile on a paver, measure the paver length and width in inches, photograph the base layer where a corner has lifted, and note whether the surface is interlocking concrete pavers, casting slab, or exposed aggregate. A paver from one manufacturing run can differ from the same nominal size in a later run by a small amount, and that difference is enough to open a visible joint line if you mix runs. On the OEM-versus-aftermarket decision: matching the original manufacturer’s style and thickness is the safer play when a repair is visible on the street. Aftermarket equivalents are fine and often cheaper for hidden base repairs. Call (888) 427-1810 and we’ll come look at what’s actually on your Lancaster driveway before recommending anything.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Cover Driveway & Pavers Is Failing
Spend five minutes walking the drive after a windstorm. These symptoms show up most in Lancaster:
- Hairline cracks that spread across a slab panel. Caused by thermal cycling – 100-degree afternoons and cold desert nights expand and contract the slab until it cracks along the weakest plane. If water gets into the crack and freezes in a cold snap, the crack can widen fast.
- Pavers lifting or shifting near the apron and edges. The base layer shifts when the sand joints wash out or the subgrade under the paver was never compacted to the right depth. Lancaster’s wind-driven dust works its way into those joints and the whole field loosens.
- Sunken or low spots holding water. Usually a sign the subgrade wasn’t properly compacted when the drive was first installed, or a drainage swale wasn’t cut to direct runoff away from the slab.
- Efflorescence – white chalky streaks on the surface. Alkali minerals from the concrete or the base coming to the surface through moisture. Cosmetic on its own, but it can signal water is getting where it shouldn’t.
- Rutting near the street where the tires run. Heat and heavy loads soften the surface edge, and if the drive wasn’t edged or the base edge is exposed, the corner of the panel breaks away.
Two of those symptoms – lifting and rutting – almost always mean the problem is in the base, not the surface. Repaving over a bad base buys you one season, no more.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s what a real driveway job runs in the Lancaster market:
- Paver Driveway Installation: $7,000 – $18,000
- Concrete Driveway Installation: $4,500 – $12,000
- Asphalt Driveway Paving: $3,500 – $9,000
- Driveway Replacement (removal and reinstall): $5,000 – $14,000
- Driveway Sealing (maintenance): $250 – $700
The range is driven by square footage, whether the base needs re-grading or full removal, and whether you choose premium hardscape lines – Belgard and Techo-Bloc are both on our list here – or a standard concrete or asphalt surface. Every quote is itemized: base prep, material, edging, drainage, labor. Nothing gets buried. Any scope change along the way arrives as a written change order before anyone touches the work, and every eligible job gets permits pulled and inspections signed. Our written 90-Day Done Right Promise backs the completed work – if something isn’t right, one call brings us back.
DIY or Call Us?
Some checks are safe to do yourself. Walk the drive and mark where it’s low with a hose trickle – if water pools in a spot, note it. Photograph the paver and the base where it’s exposed. Check whether weeds or sand are pushing up through joints. That information is genuinely useful when we come out.
What you shouldn’t attempt is base repair or slab replacement on a drive that carries vehicle loads. Getting the subgrade depth, compaction, and drainage right is the whole job – get it wrong and you’re repaving in two summers instead of once. And if the drive slopes toward the garage or house, regrading without knowing what it does to water flow is a real water-damage risk, not a cosmetic one.
We install hardscape using high-tension springs, heavy slabs, and cutting equipment that needs training and the right eye protection. That part isn’t a weekend job. Call (888) 427-1810 and we’ll walk out, look, and tell you honestly whether it’s a repair or a replacement.
FAQs
A properly installed concrete drive usually holds up 25 to 30 years in this climate, and pavers with good base work commonly go 20 to 25 years before a re-sand or repair is needed. Lancaster’s heat, wind, and dry/wet cycles wear on surface finish and joint sand faster than a milder climate, so annual sealing every few years helps. If yours is only a few years old and already cracking, the base or the compaction is usually the culprit. Call (888) 427-1810 for a look at what’s happening.
Sometimes yes, and when it is, we’ll say so. Cracked panels, isolated paver courses, and loose areas can be cut out and repaired. If the base under a large section is bad or the slab is tilting, a partial repair buys time but a replacement is the honest answer. We quote both and explain the trade-off rather than pushing one path.
Most single-driveway jobs are one to three working days including removal, base prep, and finishing, with weather and permit inspection timing affecting the schedule. A straight slab replacement is on the faster end. If drainage correction or base re-grading is in scope, add a day. We give you a written schedule up front, not a guess in the driveway.
We match the product by site visit and measurement, then order from named, verifiable manufacturers – we carry premium lines like Belgard and Techo-Bloc, the same brand-you-can-look-up approach we use with KraftMaid, Cambria, and Silestone on interiors. You’ll see the manufacturer and product on the quote. No mystery brands off a van. Call (888) 427-1810 for a free estimate.
Written by the team at Barrett & Sons Construction Lancaster, serving Lancaster and nearby areas.