Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tremron Kitchen Remodeling: The Lancaster Owner’s Guide
Tremron is a Florida-based hardscape and stone brand, and in Lancaster the product we install most often from that line is Tremron pavers and wall block – so a “Tremron kitchen” usually means the outdoor kitchen, patio, or hardscape surface behind the house, not the cabinets indoors. If you’re remodeling the interior kitchen itself, the brand names we work with are KraftMaid and Cambria for cabinets and counters, with Silestone as a quartz alternative. A full interior kitchen remodel in Lancaster runs $14,000 to $45,000 installed, and an outdoor kitchen or Tremron hardscape surface is quoted separately as a line item alongside it.
Owners usually find out something’s wrong the same way: a paver under the grill has sunk a half-inch, the mortar bed behind the veneer is cracking, or a retaining edge on the outdoor counter is pulling away from the wall block after a summer of 100-degree days. Lancaster’s swing between desert heat and winter overnight freezes is hard on hardscape joints, and outdoor kitchen surfaces take the worst of it.
Key Takeaways
- Tremron makes pavers, wall block, and stone veneer products – not kitchen cabinets or countertops.
- Interior kitchen remodels in Lancaster: $14,000 to $45,000. Outdoor Tremron hardscape is a separate line item.
- We install Tremron-compatible surfaces to manufacturer spec, with permits pulled on any eligible job.
- Every price change arrives as a written change order before work starts.
We’re Barrett & Sons Construction, an independent local contractor. We’re not affiliated with Tremron – we install their products and compatible materials the way the manufacturer specifies.
Which Tremron Models This Applies To
Tremron’s product lines break into three families that matter for an outdoor kitchen build: the paver lines (Olde Towne, Capri, Marquee, and similar), the wall block lines used for seating walls and grill surrounds, and their stone veneer. Each has different thickness specs, so mixing a paver line from one order with a different line on a later repair is where most compatibility problems start.
To identify what you actually have, look at the packaging label from the original install if you kept it, or pull one loose paver from a corner and measure it. Tremron pavers commonly run 60mm or 80mm thick depending on the line and application; a seating wall or grill base usually calls for the 80mm spec because it carries load. If you measure a 60mm paver under a built-in grill, that’s a red flag on the original install, not just wear.
OEM vs. aftermarket: on pavers, matching the exact line matters more than matching the brand – color and dimension continuity between batches is the real issue, not whether the piece says Tremron on it. On wall block and veneer, use the OEM spec piece; generic substitutes often don’t carry the same compressive rating. We source the correct piece to your measured spec rather than guessing.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Tremron Kitchen Remodeling Is Failing
- Pavers sinking or rocking under the grill. Usually a base compaction problem, made worse by heat cycling that loosens the bedding sand over time. A grill that’s been walked around for years accelerates it.
- Cracks running through a seating wall or counter face. Often a missing or undersized expansion joint – wall block expands and contracts in Lancaster’s summer-to-winter temperature swing and cracks at the weakest point.
- Mortar joints crumbling behind stone veneer. The wrong mortar mix or no weep detail lets moisture sit behind the veneer, and freeze-thaw cycles pop the joints open.
- Efflorescence – white chalky staining on the surface. Salt migrating out of the paver or block, usually from water getting behind the wall with nowhere to drain.
- Grill surround pulling away from the wall. The base under the surround has settled or the anchoring wasn’t done to spec. This one is worth stopping to look at before it gets worse.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For interior kitchen work in Lancaster, here’s what we quote:
| Scope | Installed Price Range |
|---|---|
| Kitchen Remodel (full) | $14,000 – $45,000 |
| Small Kitchen Remodel | $9,000 – $20,000 |
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Backsplash Installation | $800 – $2,500 |
| Kitchen Island Installation | $3,000 – $10,000 |
The range is driven by cabinet brand and count, countertop material and square footage, and whether plumbing or electrical moves. Outdoor Tremron hardscape repair or rebuild is quoted as a separate line item. We itemize parts and labor separately so you can see what the material costs versus the install. Everything gets a written change order before work proceeds, and the whole job is backed by our written 90-Day Done Right Promise.
DIY or Call Us?
What you can safely do yourself: pull a loose paver to measure it, photograph the wall crack, check for efflorescence, and note whether water pools near the grill base. That’s diagnostic information and it helps us quote accurately.
Where it goes wrong: resetting pavers under a built-in grill without correcting the base is a one-season fix – the same sinking returns. Rebuilding a wall block counter face or re-pointing veneer over a compromised base traps moisture and makes the failure worse. And anything involving a gas line to the grill, or a load-bearing wall block structure, needs someone who knows what they’re looking at. If your setup touches gas, stop there and call.
Every job we take on includes permits pulled and inspections signed, written allowances, and a face you’ll recognize at the hardware store. Call (888) 427-1810 to schedule your free estimate.
FAQs
A properly installed Tremron paver surface typically holds up 25 to 30 years or more, but Lancaster’s heat and freeze-thaw swing shortens that on outdoor kitchen surfaces if the base isn’t compacted to spec or the expansion joints aren’t there. The install quality matters more than the material’s rated life.
Yes, in most cases – a single cracked wall block or a small section of sunken pavers can be lifted, the base corrected, and the pieces reset. A wide crack running through a counter face usually signals a missing expansion joint and needs the joint cut in, not just filled. Call (888) 427-1810 and we’ll tell you honestly which one you’re looking at.
A small section repair on a paver surface or wall block is often a one-day job once materials are on site. A full outdoor kitchen rebuild or interior kitchen remodel takes weeks, not days – cabinet and counter lead times drive that schedule, and we’ll give you a written timeline before you commit.
We work from exact measurements off your existing pavers, block, or veneer plus the original line name where you still have it, then order to that spec rather than substituting a generic equivalent. For interior kitchen brands like KraftMaid, Cambria, and Silestone, we order direct and confirm lead times before work begins.
Call (888) 427-1810 for a free estimate – a live person answers, and there’s no trip charge inside the county.
Written by the team at Barrett & Sons Construction Lancaster, serving Lancaster and nearby areas.