Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tremron Driveway & Pavers: The Lancaster Owner’s Guide
We install and repair Tremron-compatible driveways and pavers throughout Lancaster, and a full paver driveway typically runs $7,000 – $18,000 installed. The part in question is almost always a paver, a base course, or a joint-sand system, not a single “unit” you order off a shelf, which is where most owner searches stall. Homeowners here usually discover the failure slowly: one paver rocks underfoot, or an edge sinks a half-inch after a wet winter, or the sand between the joints washes out and the lines start to wander. By the time it’s obvious, water has been working under the surface for a season or two.
Which Tremron Models This Applies To
Tremron makes a wide spread of hardscape lines, and Lancaster homes carry most of them. The common ones we see on driveways here are the Mega Olde Towne, Olde Towne, and Mega Bergerac styles, plus the larger-format Roman and Holland profiles on patios and walkways. Matching a replacement means measuring the face, not guessing from a photo: length, width, and thickness in inches, plus the color name if you can read it off an original invoice. Thickness matters most. Tremron driveway pavers are typically 2 3/8 inches (60mm), and a thinner wall or patio paver swapped into a driveway will crack under a vehicle load within a year, so a “close enough” match is a false economy.
On the OEM-versus-aftermarket question: for a repair, a color-matched Tremron paver is worth the wait, because dye lots shift between production runs and a mismatched patch is visible from the street forever. For a fresh installation, Tremron’s full line is available and we’ll show you the samples so you can touch the finish before you commit. We’re an independent contractor and not affiliated with Tremron. We install and repair their products like we do Belgard, Techo-Bloc, and the rest of our hardscape lines.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Tremron Driveway & Pavers Is Failing
- Paver rocking or loose underfoot. That means the bedding sand has shifted or the base wasn’t compacted deep enough, usually because a contractor skipped a layer of base course to save a day.
- Sinking at the driveway apron or edges. Water is running under the edge and washing out fines, most often where the paver meets the street or a downspout dumps nearby.
- Sand washing out of the joints. The joint sand is the pavers’ interlock. When it drains away, the surface loses its grip on itself and pavers start spreading.
- Weed growth in the seams. Persistent weeds between joints point to missing polymeric sand or a base that’s stayed saturated long enough to grow roots.
- Hairline cracks or chipped corners. Often a thin paver or a vehicle load over an un-compacted patch, which is why matching the correct 60mm thickness matters.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For Lancaster, here’s the honest installed range for the work behind these failures:
| Repair or install | Typical range |
|---|---|
| Spot paver repair (lift, re-base, reset) | $300 – $900 |
| Joint sand re-sanding (whole driveway) | $250 – $700 |
| Paver driveway installation | $7,000 – $18,000 |
| Paver patio installation | $3,500 – $11,000 |
What moves the price: square footage, how deep the base needs to go, whether the old driveway comes out, and the paver profile you pick. A spot repair stays low because we’re lifting only the failed section. A full install carries the base, compaction, edge restraint, polymeric joint sand, and the paver itself. Every scope and every allowance is on the written estimate before work starts, and any change is a written change order before it happens.
DIY or Call Us?
You can safely pull a joint-sand sample between your fingers, hose it to check drainage, and note which pavers rock. Re-sanding a compact driveway is a reasonable weekend job. What goes wrong is the base and lift work. Lifting pavers, re-compacting a proper base in layers, and resetting them so the interlock holds takes the right plate compactor and a bead of patience, and a driveway that looks right but sits on a shallow base fails again the next rainy season. You don’t need a hardscape crew for a one-paver fix, but for anything structural, call (888) 427-1810 and we’ll give you a straight read on whether it’s a $400 fix or a $10,000 rebuild.
FAQs
A properly installed Tremron paver driveway lasts 25 to 50 years, and the pavers themselves often outlast the base under them. Lancaster’s heat cycling and the summer sun are the main stresses; the paver survives, the sand and base are what need attention over time.
Yes, most isolated failures are a spot repair, not a full replacement. If the base under the whole driveway is failing, a patch will follow it down, so we recommend we look before you spend.
A spot repair takes a few hours; a full paver driveway install runs three to five days depending on size and base depth. We’ll tell you the timeline in writing before we start.
We match by measurement and color to the Tremron profile, and we bring samples so you approve the match before any paver is set. Call (888) 427-1810 for a free estimate and we’ll get the right one on the quote.
Call Barrett & Sons Construction Lancaster at (888) 427-1810 for a free estimate on your Tremron driveway and pavers. Every price change is in writing, every eligible permit is pulled, and every job is backed by the written 90-Day Done Right Promise.
Written by the team at Barrett & Sons Construction Lancaster, serving Lancaster and nearby areas.